journal article·2017-04

Improved stability of CdTe solar cells by absorber surface etching

Ivan Rimmaudo, Andrei Salavei, Elisa Artegiani, Daniele Menossi, Marco Giarola, Gino Mariotto, Andrea Gasparotto, Alessandro Romeo

Publisher page

Abstract

Abstract For CdTe solar cells copper seems to be necessary to achieve best energy conversion efficiencies, whilst it is known to be the main reason of cell performance degradation due to its tendency to diffuse through the bulk. Some studies have shown a direct connection between defect concentration and copper, but little has been discussed about its relation to the CdTe etching. Within this study many samples with Cu/Au back-contact have been prepared with different etching times and tested applying thermal, luminous and electrical stresses. We have analyzed the aging effects on the cell performance and on the nature and concentration of the defects by means of a variety of characterization techniques, like atomic force microscopy, Raman, current-voltage, capacitance-voltage, drive level capacitance profiling and admittance spectroscopies. Results of the accelerated lifetime tests show that different performance degradation is observed for cells with differently etched absorber. Solar cells made with optimized etching have very low degradation while the strongest performance reduction is detected for unetched cells despite their initial efficiency is as high as for the case of etched absorbers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells10.1002/pip.527 ↗
2. Phase control of CuxTe film and its effects on CdS/CdTe solar cell10.1016/j.tsf.2006.12.151 ↗
3. A photoemission interface determination of the band diagram of the Te / CdTe10.1063/1.359444 ↗
4. Effects of surface treatments on Schottky barrier formation at metal/n‐type CdTe contacts10.1063/1.101208 ↗
5. Admittance spectroscopy of CdTeCdS solar cells subjected to varied nitric-phosphoric etching conditions10.1063/1.2402961 ↗
6. A study of the CdTe treatment with a Freon gas such as CHF2Cl10.1016/j.tsf.2007.12.124 ↗
7. Evaporated Te on CdTe: a vacuum-compatible approach to making back contact to CdTe solar cell devices10.1002/(SICI)1099-159X(199605/06)4:3<225::AID-PIP122>3.0.CO;2-6 ↗
8. I. Rimmaudo, A. Salavei, F. Rossi, C. Ferrari, A. Romeo, Etching effect of CdTe absorber on the stability of thin film solar cell devices, in: Proceedings of the 2013 IEEE 39th Photovolt. Spec. Conf., 2013, pp. 2029–2033.10.1109/PVSC.2013.6744871 ↗
9. Andrei Salavei, Ivan Rimmaudo, Fabio Piccinelli, Daniele Menossi, Nicola Romeo, Alessandro Romeo, Analysis of CdTe activation treatment with a novel approach, in: Proceedings of the 28th Eur. Photovolt. Sol. Energy Conf. Exhib., 2014, pp. 2140–2142.
10. Copper inclusion and migration from the back contact in CdTe solar cells
11. S. Demtsu, D. Albin, J. Sites, Role of Copper in the Performance of CdS /CdTe Solar Cells, in: Proceedings of the Conf. Rec. IEEE 4th World Conf. Photovolt. Energy Convers., 2006, pp. 523–526.10.1109/WCPEC.2006.279507 ↗
12. S.S. Hegedus, B.E. Mccandless, R.W. Birkmire, Analysis of stress-induced degradation in CdS/CdTe solar cells, in: Proceedings of the Conf. Rec. 28th IEEE Photovolt. Spec. Conf., 2000, pp. 535–538.10.1109/PVSC.2000.915891 ↗
13. T.A. Gessert, S. Asher, S. Johnston, A. Duda, M.R. Young, T. Moriarty, Formation Of ZnTe: Cu/Ti Contacts at High Temperature for CdS/CdTe Devices, in: Proceedings of the Conf. Rec. 2006 IEEE 4th World Conf. Photovolt. Energy Conversion, 2006, pp. 432–435.
14. An innovative process suitable to produce high-efficiency CdTe/CdS thin-film modules10.1016/j.solmat.2009.06.001 ↗
15. A. Romeo, A. Salavei, I. Rimmaudo, A. Bosio, D. Menossi, F. Piccinelli, et al., Electrical characterization and aging of CdTe thin film solar cells with Bi2Te3 back contact, in: Proceedings of the Photovolt. Spec. Conf. (PVSC), 2013 IEEE 39th., 2013, pp. 1178–1182.10.1109/PVSC.2013.6744350 ↗
16. I. Rimmaudo, A. Salavei, A. Romeo, Ageing of CdTe Devices by Copper Diffusion, in: Proceedings of the 27th Eur. Photovolt. Sol. Energy Conf. Exhib., 2012, pp. 2828–2832.
17. Room-temperature detection of mobile impurities in compound semiconductors by transient ion drift10.1063/1.365563 ↗
18. Diffusion and influence of Cu on properties of CdTe thin films and CdTe/ CdS cells10.1016/j.solmat.2004.05.007 ↗
19. Stability of CdTe / CdS thin- film solar cells10.1016/S0927-0248(00)00014-3 ↗
20. Stability of CdTe solar cells at elevated temperatures: bias, temperature, and Cu dependence10.1063/1.57895 ↗
21. Electronic behaviour of thin-film CdTe solar cells10.1007/s003390050985 ↗
22. A study of the back contacts on CdTe / CdS solar cells10.1016/S0040-6090(99)00842-1 ↗
23. Accelerated stress testing and diagnostic analysis of degradation in CdTe solar cells10.1117/12.795360 ↗
24. S. Demtsu, S. Bansal, D .Albin, Intrinsic stability of thin-film CdS/CdTe modules, in: Proceedings of the Photovolt. Spec. Conference (PVSC), 2010 35th IEEE., 2010, pp. 1161–1165.10.1109/PVSC.2010.5614753 ↗
25. Capacitance profiling in the CIGS solar cells10.1016/j.tsf.2006.12.102 ↗
26. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
27. Modeling thin-film PV devices10.1002/pip.524 ↗
28. Optical response of deep defects as revealed by transient photocapacitance and photocurrent spectroscopy in CdTe/CdS solar cells10.1016/j.solmat.2014.02.024 ↗
29. Cross-sectional mapping of hole concentrations as a function of copper treatment in CdTe photo-voltaic devices10.1002/pip.2576 ↗
30. Theoretical analysis of effects of deep level, back contact, and absorber thickness on capacitance-voltage profiling of CdTe thin-film solar cells10.1016/j.solmat.2012.01.003 ↗
31. Physics and chemistry of CdTe/CdS thin film heterojunction photovoltaic devices: fundamental and critical aspects10.1039/C3EE41981A ↗
32. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
33. Admittance spectroscopy of impurity levels in Schottky barriers10.1063/1.321865 ↗
34. Calculation of the dynamic response of Schottky barriers with a continuous distribution of gap states10.1103/PhysRevB.25.5321 ↗
35. Band-gap level of the cadmium vacancy in CdTe10.1016/S0022-0248(98)80243-1 ↗
36. Deep energy levels in CdTe and CdZnTe10.1063/1.366946 ↗
37. Identification of Cu and Ag Acceptors in CdTe10.1016/0038-1098(82)90843-2 ↗
38. J. Beach, F.H. Seymour, V.I. Kaydanov, T.R. Ohno, Studies of Basic Electronic Properties of CdTe-Based Solar Cells and Their Evolution During Processing and Stress 〈http://www.nrel.gov/docs/fy07osti/41097.pdf〉, 2006.
39. Admittance spectroscopy of thin film solar cells10.1016/j.ssi.2004.08.048 ↗
40. V. Evani, M. Khan, V. Kendre, D. Morel, C. Ferekides, Effect of Cu doping on polycrystalline CdTe prepared by close-spaced sublimation, in: Proceedings of the Conf. Rec. IEEE Photovolt. Spec. Conf., 2013, pp. 1428–1431.10.1109/PVSC.2013.6744412 ↗
41. First-principles-based analysis of the influence of Cu on CdTe electronic properties10.1016/j.tsf.2012.10.027 ↗
42. Direct evidence of enhanced chlorine segregation at grain boundaries in polycrystalline CdTe thin films via three-dimensional TOF-SIMS imaging10.1002/pip.2498 ↗
43. Determination of Cu concentrations in CdTe/CdS devices by high mass resolution secondary ion mass spectrometry
44. Diffusion of copper in cadmium telluride10.1016/0022-0248(92)90753-6 ↗
45. Analysis of contact degradation at the CdTe-electrode interface in thin film CdTe-CdS solar cells10.1063/1.359796 ↗