journal article·2014-03

Poriferous microtablet of anatase TiO2 growth on an ITO surface for high-efficiency dye-sensitized solar cells

Akrajas Ali Umar, Suratun Nafisah, Siti Khatijah Md Saad, Sin Tee Tan, Aamna Balouch, Muhamad Mat Salleh, Munetaka Oyama

Publisher page

Abstract

Abstract A liquid-phase deposition method enables the synthesis of a unique anatase TiO 2 structure, which consists of poriferous microtablets with a hairy nanowire skin and a body constructed by a brick-like assembly of nanocuboids, directly onto an ITO substrate. The poriferous TiO 2 microtablets (PTM) have square-shaped, rounded vertices, edges that are 10 µm in length and a thickness of approximately 5 μm. They can be grown at a high density onto an ITO surface from a growth solution that contains ammonium hexafluoro titanate and boric acid. The nanowires that decorate the PTM surface have a diameter of 10 nm and a length of approximately 200 nm. Its bulk structure is constructed from a brick-like assembly of nanocuboids with a width, length and thickness of approximately 10, 20 and 5 nm, respectively. The driving factor for the formation of this structure is oriented attachment under kinetic control. The preliminary results of the application of this structure in dye-sensitized solar cell (DSSC) devices indicate a power conversion efficiency as high as 3.0%. Because the active surface area in the PTM is large enough for dye adsorption (for a typical dye loading as high as approximately 936 nmol/cm 2 ) and surface reactions, a high-efficiency DSSC device may be achievable using this new structure if the optimum conditions are obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Nonaqueous synthesis, growth mechanism, and exploitation in dye-sensitized solar cells10.1021/ja208418z ↗
2. Preparation of grass-like TiO2 nanostructure thin films: effect of growth temperature10.1016/j.apsusc.2012.12.128 ↗
3. Rectangular bunched rutile TiO2 nanorod arrays grown on carbon fiber for dye-sensitized solar cells10.1021/ja2120585 ↗
4. Improved conversion efficiency in dye-sensitized solar cells10.1021/ja805201v ↗
5. Based on oriented TiO2 nanotube arrays: transport, trapping, and transfer of electrons10.1021/ja804852z ↗
6. Enhanced photovoltaic performance of nanostructured hybrid solar cell using highly oriented TiO2 nanotubes10.1021/jp1077888 ↗
7. Controlled formation of highly organized mesoporous titania thin films: from mesostructured hybrids to mesoporous nanoanatase TiO210.1021/ja030070g ↗
8. Anodic formation of thick anatase TiO2 mesosponge layers for high-efficiency photocatalysis10.1021/ja910045x ↗
9. Constructed with titanium mesh and 3-D array of TiO2 nanotubes†10.1021/jp102299g ↗
10. Cell using new photosensitizer with enhanced open-circuit voltage and fill factor10.1021/am301089t ↗
11. CdS quantum dots sensitized TiO2 nanotube-array photoelectrodes10.1021/ja0777741 ↗
12. Large oriented arrays and continuous films of TiO2-based nanotubes10.1021/ja0369461 ↗
13. A review on highly ordered, vertically oriented TiO2 nanotube arrays: fabrication, material properties, and solar energy applications10.1016/j.solmat.2006.04.007 ↗
14. Removing structural disorder from oriented TiO2 nanotube arrays: reducing the dimensionality of transport and recombination in dye-sensitized solar cells10.1021/nl072145a ↗
15. Rapid charge transport in dye sensitized solar cells made from vertically aligned single crystal rutile TiO2 nanowires10.1002/ange.201108076 ↗
16. Enhanced charge-collection efficiencies and light scattering in dye-sensitized solar cells using oriented TiO2 nanotubes arrays10.1021/nl062000o ↗
17. Electrons in nanostructured TiO2 solar cells: transport, recombination and photovoltaic properties10.1016/j.ccr.2004.03.015 ↗
18. Mesoporous TiO2 single crystals delivering enhanced mobility and optoelectronic device performance10.1038/nature11936 ↗
19. Determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements10.1002/cphc.200200615 ↗
20. Voltammetric behavior of TiO2 films on graphite electrodes prepared by liquid phase deposition10.1016/j.matchemphys.2004.08.007 ↗
21. Low-temperature synthesis of anatase thin films on glass and organic substrates by direct deposition from aqueous solutions10.1016/S0040-6090(99)00084-X ↗
22. Materials interface engineering for solution-processed photovoltaics10.1038/nature11476 ↗
23. Photoelectrochemical cells10.1038/35104607 ↗
24. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
25. Aggregation-based crystal growth and microstructure development in natural iron oxyhydroxide biomineralization products10.1126/science.289.5480.751 ↗
26. Direction-specific interactions control crystal growth by oriented attachment10.1126/science.1219643 ↗
27. Rate constants for charge transfer across semiconductor–liquid interfaces10.1126/science.274.5289.968 ↗
28. Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results10.1021/cr00035a013 ↗
29. Dye bonding to TiO2: in situ attenuated total reflection infrared spectroscopy study, simulations, and correlation with dye-sensitized solar cell characteristics10.1021/la302197z ↗
30. Enhanced performance of dye-sensitized solar cells by an Al2O3 charge-recombination barrier formed by low-temperature atomic layer deposition10.1039/b819337a ↗
31. A highly efficient solar cell made from a dye-modified ZnO-covered TiO2 nanoporous electrode10.1021/cm000230c ↗
32. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗