journal article·2012-04

Investigating the stability of defects in MoO3 and its role in organic solar cells

S.Y. Chiam, B. Dasgupta, D. Soler, M.Y. Leung, H. Liu, Z.E. Ooi, L.M. Wong, C.Y. Jiang, K.L. Chang, J. Zhang

Publisher page

Abstract

Abstract In this work, the generation and stability of defects in molybdenum oxide (MoO3) is studied in detail. We found that the defects generated by annealing are typically more stable against re-oxidation by plasma treatment when compared with the sputtered defects. Against air exposure, the annealed defects are also highly stable showing little re-oxidation even after long exposures. The sputtered defects however showed prominent decrease of the defect states and the kinetics can be classified into two regimes with different rate constants. The reason behind the difference in stability can be attributed to the different types of bonding for the generated defects. Following this, we fabricated two forward solar cells with an as-deposited MoO3 and another with intentionally generated defects. We obtained a higher short circuit current (Jsc) when the generated defects are present and the overall efficiency is increased by ∼50%. We propose that the presence of the defects acted as an additional pathway for holes extraction and highlights the important role that surface defects play in enhancement of device performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Photochromism of molybdenum oxide10.1016/S1389-5567(03)00025-X ↗
2. Catalytic properties of MoO3 revisited10.1016/S0920-5861(96)00107-1 ↗
3. Crystalline Mo–V–O based complex oxides as selective oxidation catalysts of propane10.1016/j.cattod.2004.09.022 ↗
4. X-ray diffraction and photoelectron spectroscopy studies of MoO2 as catalyst for the partial oxidation of isooctane10.1016/j.susc.2009.05.010 ↗
5. Interface investigation and engineering–achieving high performance polymer photovoltaic devices10.1039/b925382c ↗
6. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
7. Combined effects of MoO3 interlayer and PC70BM on polymer photovoltaic device performance10.1016/j.orgel.2010.02.006 ↗
8. Green dioxythiophene-benzothiadiazole donor–acceptor copolymers for photovoltaic device applications10.1021/cm903495b ↗
9. The effect of molybdenum oxide interlayer on organic photovoltaic cells10.1063/1.3220064 ↗
10. Efficient, air stable bulk heterojunction polymer solar cells using MoOx as the anode interfacial layer10.1002/adma.201100038 ↗
11. Transport properties of molybdenum trioxide and its suboxides10.1016/0040-6031(82)85062-4 ↗
12. The interface state assisted charge transport at the MoO3/metal interface10.1063/1.3077289 ↗
13. Reduced molybdenum oxide as an efficient electron injection layer in polymer light emitting diodes10.1063/1.3557502 ↗
14. A metallic molybdenum suboxide buffer layer for organic electronic devices10.1063/1.3432447 ↗
15. Enhancement of current injection in organic light emitting diodes with sputter treated molybdenum oxides as hole injection layers10.1063/1.3579532 ↗
16. On the active oxygen in bulk MoO3 during the anaerobic dehydrogenation of methanol10.1021/jp810428e ↗
17. Oxygen-exchange properties of MoO3: an in-situ Raman spectroscopy study10.1021/j100095a007 ↗
18. X-ray phototelectron spectroscopic studies of thin film oxides of cobalt and molybdenum10.1002/sia.740150406 ↗
19. Structure and chemical properties of molybdenum oxide thin films10.1116/1.2747628 ↗
20. Epitaxial growth and properties of MoOx (2<x<2.75) films10.1063/1.1868852 ↗
21. The initial oxidation of molybdenum10.1016/0039-6028(75)90432-X ↗
22. Formation of thin oxide and sulphide films on polycrystalline molybdenum foils: characterization by XPS and surface potential variations10.1016/S0368-2048(97)00071-6 ↗
23. Formation of a faceted MoO2 epilayer on Mo (112) studied by XPS, UPS and STM10.1016/j.susc.2004.01.010 ↗
24. Properties of oxygen sites at the MoO3 (010) surface: density functional theory cluster studies and photoemission experiments10.1016/S0039-6028(01)01169-4 ↗
25. Energy bands and final-state effects in K0.3MoO310.1103/PhysRevB.32.3568 ↗
26. Theoretical and experimental study of the electronic structures of MoO3 and MoO210.1021/jp9093172 ↗
27. Selective thermal reduction of single-layer MoO3 nanostructures on Au(111)10.1016/j.susc.2008.01.014 ↗
28. Origins of improved hole-injection efficiency by the deposition of MoO3 on the polymeric semiconductor poly(dioctylfluorene-alt-benzothiadiazole)10.1002/adfm.200901022 ↗
29. Electronic structure of anode interface with molybdenum oxide buffer layer10.1016/j.orgel.2009.10.013 ↗
30. Embedded Peierls instability and the electronic structure of MoO210.1088/0953-8984/12/23/303 ↗
32. Reduction and re-oxidation of molybdena and vanadia: DFT cluster model studies10.1016/j.cattod.2004.09.046 ↗
33. Oxidation of Si surfaces10.1063/1.322133 ↗
34. Hydration of passive oxide films on aluminum10.1021/jp013246e ↗
35. The effect of atmosphere and ZnO morphpology on the performance of hybrid poly(3-hexylthiophene)/ZnO nanofibre photovoltaic devices10.1021/jp0734225 ↗
36. Oxygen release and exchange in niobium oxide MEHPPV hybrid solar cells10.1021/cm061429d ↗
37. Nb-TiO2/polymer hybrid solar cells with photovoltaic reponse under inert atmosphere conditions10.1016/j.solmat.2010.03.011 ↗
38. Oxide/polymer interfaces for hybrid and organic solar cells: anatase vs. rutile TiO210.1016/j.solmat.2010.12.028 ↗
39. MoO3/poly(9,9-dioctylfluorene-co-N-[4-(3-methylpropyl)]-diphenylamine) double-interlayer effect on polymer solar cells10.1063/1.3310013 ↗
40. On the nature of shunt leakage in amorphous silicon p–i–n solar cells
41. Universality of non-ohmic shunt leakage in thin-film soar cells10.1063/1.3518509 ↗