Thickness effect of RF sputtered TiO2 passivating layer on the performance of dye-sensitized solar cells
Source abstract
Abstract
Abstract We report on the characteristics of a TiO2 passivating layer grown by radio frequency (RF) magnetron sputtering on F-doped SnO2 (FTO) electrodes as a function of its thickness. The optical transparency, surface roughness and passivation properties of the TiO2 layer passivating the FTO electrode depend on the thickness of the TiO2 passivating layer. In addition, it was found that the power conversion efficiency of the dye-sensitized solar cells (DSSCs) is critically dependent on the thickness of RF sputtered TiO2 layer inserted between FTO electrode and nanoporous TiO2 layer. The DSSC fabricated on 50 nm thick TiO2 passivating FTO electrode showed the maximum power conversion efficiency of 4.42% due to effective prevention of the electron transfer to electrolyte. This indicates that the thickness optimization of the TiO2 passivating layer is one of the important parameter to obtain high performance DSSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Dye-sensitised solar cells: review10.1016/S1389-5567(03)00026-1 ↗
2. Polymers in dye sensitized cells: overview and perspectives: review10.1016/j.ccr.2004.05.018 ↗
3. Interfacial processes in the dye-sensitized solar cell: review10.1016/j.ccr.2004.02.009 ↗
4. Characterization of titanium dioxide blocking layers in dye-sensitized nanocrystalline solar cells10.1021/jp030790+ ↗
5. Systematic investigation of the role of compact TiO2 layer in solid state dye-sensitized TiO2 solar cells10.1016/j.ccr.2004.02.008 ↗
6. Poly(4-undecyl-2,2′-bithiophene) as a hole conductor in solid state dye sensitized titanium dioxide solar cells10.1016/S0379-6779(00)00650-0 ↗
7. Plasma emission control of reactive sputtering process in mid-frequency mode with dual cathodes to deposit photocatalystic TiO2 films10.1016/S0040-6090(03)01152-0 ↗
8. Carrier leakage blocking effect of high temperature sputtered TiO2 film on dye-sensitized mesoporous photoelectrode10.1016/j.tsf.2007.03.079 ↗
9. The effect of sputter-deposited TiO2 passivating layer on the performance of dye-sensitized solar cells based on sol–gel derived photoelectrode10.1016/j.tsf.2008.06.027 ↗
10. Transparent conducting indium zinc oxide anode for highly efficient phosphorescent organic light emitting diodes10.1149/1.2799745 ↗
11. Sputtering of aluminum cathodes on OLEDs using linear facing target sputtering with ladder-type magnet arrays10.1149/1.2908864 ↗