journal article·2008-10

Characterization of copper–manganese-oxide thin films deposited by dip-coating

Rocío Bayón, Gema San Vicente, César Maffiotte, Ángel Morales

Publisher page

Abstract

Abstract Thin films of copper–manganese oxide were prepared by dip-coating method and annealed between 400 and 500 °C for periods of time from 15 to 90 min. The influence of both annealing time and temperature on film composition and optical properties was studied. X-ray photoelectron spectroscopy (XPS) measurements indicated that the initially formed mixture of copper and manganese oxides leads to Cu1.5Mn1.5O4 through a solid state red-ox reaction. This reaction takes place at temperatures higher than 450 °C and the full conversion of single oxides into Cu1.5Mn1.5O4 needs at least 60 min to proceed. In relation to the optical properties we found that low solar absorptance (αs∼0.6) can be associated with the mixture of single oxides whereas the formation of Cu1.5Mn1.5O4 dramatically increases solar absorptance values (αs∼0.9). The presence of Mn3+ and Mn4+ in octahedral sites and Cu+ and Cu2+ in tetrahedral sites is also evidenced by XPS and can explain the high conductivity of films where Cu1.5Mn1.5O4 is present.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Orel · Sol. Energy Mater. Sol. Cells · 1999 · 57 · 29110.1016/S0927-0248(98)00181-0 ↗
2. Orel · Sol. Energy · 2000 · 69 · 131
3. Kaluža · J. Sol–Gel Sci. Technol. · 2001 · 20 · 6110.1023/A:1008728717617 ↗
4. Kaluža · Sol. Energy Mater. Sol. Cells · 2001 · 70 · 18710.1016/S0927-0248(01)00024-1 ↗
5. Vince · Sol. Energy Mater. Sol. Cells · 2003 · 79 · 31310.1016/S0927-0248(02)00457-9 ↗
6. Bayon · Renew. Energy · 2008 · 33 · 34810.1016/j.renene.2007.05.017 ↗
7. Elbadraoui · Solid State Ion. · 1997 · 93 · 21910.1016/S0167-2738(96)00559-0 ↗
8. Veprek · J. Catal. · 1986 · 100 · 25010.1016/0021-9517(86)90090-4 ↗
9. A. Morales, European Patent Number: EP1321539.2003.
10. Lenglet · Mater. Res. Bull. · 1985 · 20 · 74510.1016/0025-5408(85)90053-4 ↗
11. Jarrige · Bull. Soc. Chim. Fr. · 1980 · 9–10 · I-363
12. Gillot · Mater. Chem. · 1997 · 7 · 251310.1039/a703731g ↗
13. Broemme · Solid State Ion. · 1985 · 16 · 17110.1016/0167-2738(85)90040-2 ↗
14. Radhakrishnan · Phys. Status Solidi (a) Appl. Res. · 1977 · 44 · 4510.1002/pssa.2210440103 ↗
15. Vandenberghe · Mater. Res. Bull. · 1973 · 8 · 57110.1016/0025-5408(73)90134-7 ↗
16. Wang · J. Cryst. Growth · 2003 · 256 · 12310.1016/S0022-0248(03)01289-2 ↗
17. Gillot · Thin Solid Films · 1999 · 357 · 22310.1016/S0040-6090(99)00402-2 ↗
18. Yanyan · J. Sol–Gel Sci. Technol. · 2007 · 42 · 4110.1007/s10971-006-1525-3 ↗
19. Nissinen · Thermochimia Acta · 2005 · 427 · 15510.1016/j.tca.2004.09.005 ↗
20. Krämer · Appl. Catal. A: Gen. · 2006 · 302 · 25710.1016/j.apcata.2006.01.018 ↗
21. Restovic · Thin Solid Films · 1991 · 199 · 13910.1016/0040-6090(91)90060-B ↗
22. Boström · Sol. Energy Mater. Sol. Cells · 2007 · 91 · 3810.1016/j.solmat.2006.07.002 ↗
23. Nair · Appl. Surf. Sci. · 1991 · 150 · 14310.1016/S0169-4332(99)00239-1 ↗
24. Tian · Science · 1997 · 27610.1126/science.276.5314.926 ↗
25. Gillot · Solid State Ion. · 1992 · 51 · 710.1016/0167-2738(92)90337-O ↗