Thermal-annealing-free inverted polymer solar cells using ZnO/Cs2CO3 bilayer as electron-selective layer
Source abstract
Abstract
Abstract We report on thermal-annealing-free inverted polymer solar cells using ZnO nanoparticles (NPs)/Cs 2 CO 3 bilayer as an electron-selective layer (ESL) and the blend of poly(3-hexylthiophene) (P3HT): phenyl C61-butryricacid methyl ester(PCBM) as an active light-absorbing layer. These layers were deposited via solution process without additional thermal treatment. The cell gave power conversion efficiency (PCE) of 3.81%, which was higher by about 40% or 80% than that of the cell with single ZnO NPs or Cs 2 CO 3 ESL, respectively. This improved performance could be attributed to the bilayer-structure ESL, whose electron-extraction and leakage-current-suppression abilities were enhanced due to its modified energy level and improved surface morphology. PCE of this device remained 92% of its original value after storage of the as-fabricated device in a N 2 -filled glove box for 80 day. Furthermore, when the blend of poly[2,6-(4,4-bis-(2-ethylhexyl)-4 H -cyclopenta[2,1-b;3,4-b′]-dithiophene)- alt -4,7-(2,1,3-benzothiadiazole)]: [6,6]-phenyl C71 butyric acid methyl ester replaced P3HT:PCBM as the active layer, higher PCE of 6.45% was achieved in the corresponding cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Energy pay-back time and CO2 emissions of PV systems10.1002/(SICI)1099-159X(200001/02)8:1<17::AID-PIP295>3.0.CO;2-C ↗
2. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
3. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
4. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
5. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
6. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
7. The OE-A OPV demonstrator anno domini10.1039/c1ee01891d ↗
8. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
9. Organic photovoltaics10.1039/b812502n ↗
10. Conjugated polymer photovoltaic cells10.1021/cm049654n ↗
11. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
12. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
13. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
14. Highly efficient tandem polymer photovoltaic cells10.1002/adma.200901624 ↗
15. For the bright future — bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
16. Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer10.1021/ja2037673 ↗
17. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
18. Influence of cathode oxidation via the hole extraction layer, in polymer:fullerene solar cells10.1016/j.orgel.2011.01.025 ↗
19. Blocking reactions between indium-tin oxide and poly (3,4-ethylene dioxythiophene):poly(styrene sulphonate) with a self-assembly monolayer10.1063/1.1469220 ↗
20. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
21. Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer10.1063/1.2359579 ↗
22. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
23. High efficiency double heterojunction polymer photovoltaic cells using highly ordered TiO2 nanotube arrays10.1063/1.2799257 ↗
24. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
25. Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer10.1063/1.2918983 ↗
26. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
27. ZnO nano-ridge structure and its application in inverted polymer solar cell10.1016/j.orgel.2009.08.011 ↗
28. Over 30% transparency large area inverted organic solar array by spray10.1016/j.solmat.2011.05.037 ↗
29. A hybridized electron-selective layer using Sb-doped SnO2 nanowires for efficient inverted polymer solar cells10.1016/j.solmat.2011.06.004 ↗
30. Spontaneous formation of nanoripples on the surface of ZnO thin films as hole-blocking layer of inverted organic solar cells
31. A metal-oxide interconnection layer for polymer tandem solar cells with an inverted architecture10.1002/adma.201001033 ↗
32. Inverted polymer solar cells integrated with a low-temperature-annealed sol–gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
33. Stable, solution-processed, high-mobility ZnO thin-film transistors10.1021/ja068876e ↗
34. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
35. Staircase in the electron mobility of a ZnO quantum dot assembly due to shell filling
36. The use of ZnO as optical spacer in polymer solar cells: theoretical and experimental study10.1063/1.2784961 ↗
37. Stability assessment on a 3% bilayer PbS/ZnO quantum dot heterojunction solar cell10.1002/adma.201001148 ↗
38. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
39. Thick C60:ZnPc bulk heterojunction solar cells with improved performance by film deposition on heated substrates10.1063/1.3154554 ↗
40. Accurate measurement and characterization of organic solar cells10.1002/adfm.200600489 ↗
41. Highly efficient flexible inverted organic solar cells using atomic layer deposited ZnO as electron selective layer10.1039/B921396A ↗
42. Efficient and air-stable polymer photovoltaic devices with WO3–V2O5 mixed oxides as anodic modification10.1109/LED.2009.2039846 ↗
43. Efficient single-layer polymer light-emitting diodes10.1002/adma.201000317 ↗
44. Improved electron injection in pol(9,9′-dioctylfluoren)-co-benzothiodiazole via cesium carbonate by means of coannealing10.1063/1.3564903 ↗
45. Absorption spectra modification in poly(3-hexylthiophene):methanofullerene blend thin films10.1016/j.cplett.2005.06.027 ↗
46. Interfacial mixing during annealing of zinc oxide nanoparticle junctions10.1063/1.3593487 ↗
47. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
48. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
49. Two-dimensional electronic excitations in self-assembled conjugated polymer nanocrystals10.1126/science.287.5454.839 ↗
50. Effects of long-term UV–visible light irradiation in the absence of oxygenon P3HT and P3HT: PCBM blend10.1016/j.solmat.2010.03.012 ↗
51. Light-induced degradation of the P3HT-based solar cells active layer10.1016/j.solmat.2010.09.021 ↗
52. Optimization of morphology of P3HT/PCBM films for organic solar cells: effects of thermal treatments and spin coating solvents10.1051/epjap:2007002 ↗