Insight into the role of post-annealing in air for high efficient Cu2ZnSn(S,Se)4 solar cells
Source abstract
Abstract
Abstract The device performance of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are improved significantly by annealing the full devices at 270 °C for 3 min in air. This paper proposes the origin of the improvement of solar cell by post-annealing treatment by analyzing the results of external quantum efficiency (EQE), Raman spectra, capacitance-voltage (C-V), admittance spectra (AS) measurements, and numerical simulation. The experimental results show that the dominant free hole carriers changed from deep defect CuZn to the much higher density of shallow defect VCu after annealing process, which resulting the increase of density of benign [VCu+ZnCu] defect cluster, and the decrease of density of detrimental [2CuZn+SnZn] defect cluster in the surface region of absorber. As a result, the open voltage (VOC) and fill factor (FF) increase significantly. The short circuit current density (JSC) increases slightly, which can be attributed to the decrease of interface recombination as well as the improvement of band alignment at CdS/CZTSSe interface. As a consequence, the conversion efficiency of CZTSSe solar cell is improved from 4.41% to 8.02% by post-annealing the full device. Additionally, numerical simulations using wxAMPS software are conducted to reveal insight into the role of the changes of defect type, defect density, and carrier density by post-annealing treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Prospects and performance limitations for Cu–Zn–Sn–S–Se photovoltaic technology10.1098/rsta.2011.0432 ↗
2. Low band gap liquid-processed CZTSe solar cell with 10.1% efficiency10.1039/c2ee00056c ↗
3. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
4. The state and future prospects of kesterite photovoltaics10.1039/c3ee41781f ↗
5. Device characteristics of CZTSSe thin-Film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
7. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
8. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
9. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
10. Cu2ZnSnSe4 thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
11. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
12. Direct observation of Cu, Zn cation disorder in Cu2ZnSnS4 solar cell absorber material using aberration corrected scanning transmission electron microscopy10.1002/pip.2279 ↗
13. The importance of band tail recombination on current collection and open-circuit voltage in CZTSSe solar cells10.1063/1.4955402 ↗
14. A low-temperature order-disorder transition in Cu2ZnSnS4 thin films10.1063/1.4863685 ↗
15. Cu-Zn disorder and band gap fluctuations in Cu2ZnSn(S,Se)4: theoretical and experimental investigations10.1002/pssb.201552530 ↗
16. Limitation factors for the performance of kesterite Cu2ZnSnS4 thin film solar cells studied by defect characterization10.1039/C5RA00069F ↗
17. Interdependence of absorber composition and recombination mechanism in Cu(In,Ga)(Se,S)2 heterojunction solar cells10.1063/1.1467621 ↗
18. Activation energy of heterojunction diode currents in the limit of interface recombination10.1063/1.3126523 ↗
19. Strategic review of interface carrier recombination in earth abundant Cu–Zn–Sn–S–Se solar cells: current challenges and future prospects10.1039/C6TA10543B ↗
20. The band gap of Cu2ZnSnSe4: effect of order-disorder10.1063/1.4896315 ↗
21. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
22. Impact of nanoscale elemental distribution in high-performance kesterite solar cells10.1002/aenm.201402180 ↗
23. Impact of annealing treatment before buffer layer deposition on Cu2ZnSn(S,Se)4 solar cells10.1016/j.tsf.2014.11.016 ↗
24. Complex surface chemistry of kesterites: Cu/Zn reordering after low temperature postdeposition annealing and its role in high performance devices10.1021/acs.chemmater.5b01473 ↗
25. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
26. Cation disorder in Cu2ZnSnS4thin films: effect on solar cell performances10.1002/solr.201700101 ↗
27. Impact of Na dynamics at the Cu2ZnSn(S,Se)4/CdS interface during post low temperature treatment of absorbers10.1021/acsami.5b12243 ↗
28. Atom-probe tomographic study of interfaces of Cu2ZnSnS4 photovoltaic cells10.1063/1.4894858 ↗
29. Mo(S,Se)2 structure for high efficient Cu2ZnSn(S,Se)4 solar cells
30. On the growth process of Cu2ZnSn(S,Se)4 absorber layer formed by selenizing Cu–ZnS–SnS precursors and its photovoltaic performance10.1016/j.solmat.2014.09.023 ↗
31. Scheer · 2011
32. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
33. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
34. Electronic structure of Cu2ZnSn(SxSe1−x)4 surface and CdS/Cu2ZnSn(SxSe1−x)4 interface10.1002/pssc.201600178 ↗
35. Structural and optical characterization of CdS films grown by photochemical deposition10.1063/1.369371 ↗
36. Comparative study of nano-structured CdS thin films prepared by CBD and spray pyrolysis: annealing effect10.1016/j.tsf.2005.11.070 ↗
37. Physical properties of chemical bath deposited CdS thin films10.1016/j.solmat.2004.01.023 ↗
38. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
39. Secondary crystalline phases identification in Cu2ZnSnSe4 thin films: contributions from Raman scattering and photoluminescence10.1007/s10853-014-8446-2 ↗
40. Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experiments10.1063/1.4704191 ↗
41. Polarized Raman spectroscopy of Cu-poor and Zn-rich single-crystal Cu2ZnSnSe410.1063/1.4900560 ↗
42. Influence of compositionally induced defects on the vibrational properties of device grade Cu2ZnSnSe4 absorbers for kesterite based solar cells10.1063/1.4913262 ↗
43. The influence of precursor Cu content and two-stage processing conditions on the microstructure of Cu2ZnSnSe410.1016/j.tsf.2014.11.028 ↗
44. Secondary phase and Cu substitutional defect dynamics in kesterite solar cells Impact on optoelectronic properties10.1016/j.solmat.2016.01.029 ↗
45. Systematic compositional changes and their influence on lattice and optoelectronic properties of Cu2ZnSnSe4 kesterite solar cells10.1016/j.solmat.2015.10.004 ↗
46. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
47. Intrinsic point defects in off-stoichiometric Cu2ZnSnSe4: a neutron diffraction study10.1063/1.4997402 ↗
48. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
49. Interpretation of admittance, capacitance-voltage, and current-voltage signatures in Cu(In,Ga)Se2 thin film solar cells10.1063/1.3277043 ↗
50. Defect physics of the kesterite thin-film solar cell absorber Cu2ZnSnS410.1063/1.3275796 ↗
51. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗
52. Deep electron traps and origin ofp-type conductivity in the earth-abundant solar-cell material Cu2ZnSnS410.1103/PhysRevB.87.155206 ↗
53. Admittance spectroscopy of Cu2ZnSnS4 based thin film solar cells10.1063/1.4726042 ↗
54. Influence of deep traps on the measurement of free‐carrier distributions in semiconductors by junction capacitance techniques10.1063/1.1663500 ↗
55. Raman scattering crystalline assessment of polycrystalline Cu2ZnSnS4 thin films for sustainable photovoltaic technologies: phonon confinement model10.1016/j.actamat.2014.02.035 ↗
56. 10% efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
57. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗