Towards understanding the characteristics of Ag–Al spiking on boron-doped silicon for solar cells
Source abstract
Abstract
Abstract With this work, we introduce numeric three-dimensional simulation of metal spiking into highly boron-doped surfaces of n-type silicon solar cells, which is moreover performed with a simulation of the quasi-steady-state photoconductance technique. This setup serves as a virtual experiment to simulate the dark saturation current density j 0,met of metallized boron-doped emitters with respect to metal spikes originating from the silver–aluminum (Ag–Al) contact. With the results obtained from this simulation model we approach quality and quantity of increased j 0,met and give detailed insight to which degree a solar cell’s performance is possibly harmed by this effect. We show that metal spikes penetrating into boron-doped emitters are of harmless nature concerning j 0,met until their tips reach depths where boron doping concentration is lower than approximately 10 18 cm −3 . Deeper spikes then lead to an exponential increase in j 0,met as more and more carriers from emitter and also the base are able to diffuse to its tip and recombine there. With the help of j 0 -results obtained experimentally in combination with the simulation results, we discuss the influence of spikes on emitter recombination, the benefits that can be achieved with deeper emitter doping profiles, and suggestions for the further development of pastes to contact boron-doped surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Y.-W. Ok, A.D. Upadhyaya, F. Zimbardi, Y. Tao, I.B. Cooper, A. Rohatgi, A.F. Carroll, T. Suess, Effect of Al content on the performance of Ag/Al screen printed N-type Si solar cells, In: Proceedings of the 39th IEEE Photovoltaic Specialists Conference, Tampa. FL, USA, 2013, pp. 2247–2249. doi: 10.1109/PVSC.2013.6744924.10.1109/PVSC.2013.6744924 ↗
2. Screen printing metallization of boron emitters10.1002/pip.933 ↗
3. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
4. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
5. Synopsys, Sentaurus Device User Guide H-2013.03.
6. F. Kiefer, R. Peibst, T. Ohrdes, J. Krugener, H.J. Osten, R. Brendel, Emitter recombination current densities of boron emitters with silver/aluminum pastes, In: Proceedings of the 40th IEEE Photovoltaic Specialists Conference, Denver, CO, USA, 2014, pp. 2808–2812. doi: 10.1109/PVSC.2014.6925514.10.1109/PVSC.2014.6925514 ↗
7. Metallization-induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
8. Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon10.1016/j.solmat.2015.04.039 ↗
9. Improving screen printed metallization for large area industrial solar cells based on n-type material10.1016/j.egypro.2011.06.171 ↗
10. Silvaco, Atlas-Device Simulation Framework, available at 〈http://www.silvaco.com/products/tcad/device_simulation/atlas/atlas.html〉 (accessed on 08.11.15).
11. E. Lohmüller, S. Werner, B. Thaidigsmann, N. Wöhrle, S. Mack, F. Clement, D. Biro, HIP-MWT+ solar cell concept on N-Type silicon and metallization-induced voltage losses, in: 29th EU PVSEC Proceedings, 2014.10.1016/j.egypro.2013.07.301 ↗
12. Two-dimensional modeling of the metallization-induced recombination losses of screen-printed solar cells10.1109/JPHOTOV.2014.2365453 ↗
13. G. Schubert, Thick film metallisation of crystalline silicon solar cells (Dissertation), Konstanz, 2006.
14. R.A. Sinton, A. Cuevas, M. Stuckings, Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, In: Proceedings of the 25th IEEE Photovoltaic Specialists Conference, Washington DC, 1996, pp. 457–460. doi: 10.1109/pvsc.1996.564042.10.1109/PVSC.1996.564042 ↗
15. R.A. Sinton, A. Cuevas, A Quasi-Steady-State Open-Circuit Voltage Method for Solar Cell Characterization, In: 16th EU PVSEC, Glasgow, 2000.
16. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, In: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, Las Vegas, 1985, pp. 578–583.
17. Increased reliability for J0-analysis by QSSPC10.1016/j.egypro.2014.08.087 ↗
18. E. Lohmüller, Development of n-Type Metal Wrap Through Solar Cells (Dissertation, to be published), 2015.
19. Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells10.1016/j.egypro.2011.06.111 ↗
20. A. Cuevas, M. Stocks, D. Macdonald, R.A. Sinton, Applications of the Quasi-Steady-State Photoconductance Technique, In: Proceedings of the 2nd World Conference on Photovoltaic Solar Energy Conversion, Vienna, 1998.
21. Validation of analytical modelling of locally contacted solar cells by numerical simulations10.1016/j.egypro.2012.07.055 ↗
22. High-efficiency silicon solar cells
23. Co-optimisation of the emitter region and the metal grid of silicon solar cells10.1002/1099-159X(200011/12)8:6<603::AID-PIP333>3.0.CO;2-M ↗
24. Altermatt · 2006
25. K.R. McIntosh, P.P. Altermatt, A freeware 1D emitter model for silicon solar cells, In: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Hawaii, 2010, pp. 2188–2193. doi: 10.1109/PVSC.2010.5616124.10.1109/PVSC.2010.5616124 ↗
26. The physics and modeling of heavily doped emitters10.1109/T-ED.1984.21805 ↗
27. Solid solubility and diffusion coefficients of boron in silicon10.1149/1.2412239 ↗