journal article·2014-03

The spectral properties and thermal stability of CrAlO-based solar selective absorbing nanocomposite coating

H.D. Liu, Q. Wan, B.Z. Lin, L.L. Wang, X.F. Yang, R.Y. Wang, D.Q. Gong, Y.B. Wang, F. Ren, Y.M. Chen, X.D. Cheng, B. Yang

Publisher page

Abstract

Abstract A novel four-layer structured Cr–Al–O tandem nano-multilayer composite coating has been prepared by cathodic arc ion plating for solar selective absorbing. The four-layer structured coating consists of pure chromium layer, low oxygen content Cr–Al–O layer (LOCL), middle oxygen content Cr–Al–O layer (MOCL) and high oxygen content Cr–Al–O layer (HOCL). The composition, structure, and surface morphology of the coating were characterized using SEM, EDS, XPS, TEM, and AFM. The optical performances of the coating were measured by spectrophotometer, while the thermal stability of the coating was evaluated by Raman spectroscopy. Results showed that LOCL and MOCL, in which amorphous Cr–Al–Ox nanolayers and composite Cr–Al–Ox nanolayers embedded with Cr2Al nanograins alternated with each other, were the main absorbers, while HOCL acted as an antireflection layer. The coating exhibited a relatively high absorptance of 0.924 and a relatively low emittance of 0.21, as well as an outstanding thermal stability with a selectivity of 0.919/0.225 even after annealing at 700 °C for 2 h in air, which properties rendered the four-layer structured Cr–Al–O tandem coating a potential material for photo-thermal conversion at high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Nanostructured materials for solar energy conversion10.1016/j.solener.2004.11.004 ↗
2. High efficiency Mo–Al2O3 cermet selective surfaces for high-temperature application10.1016/0927-0248(95)00078-X ↗
3. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
4. Pt–Al2O3 nanocoatings for high temperature concentrated solar thermal power applications10.1016/j.physb.2011.09.104 ↗
5. Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
6. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
7. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
8. Spectral reflectance of TiNx and ZrNx films as selective absorbers10.1016/0038-092X(77)90019-6 ↗
9. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
10. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
11. Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering10.1016/j.apsusc.2006.11.021 ↗
12. High temperature oxidation behavior of CrN/AlN superlattice films10.1016/j.tsf.2010.11.042 ↗
13. Solar energy materials10.1007/BF00323721 ↗
14. Applications of thin graded-index films to solar absorbers10.1364/AO.16.001438 ↗
15. An X-ray photoelectron spectroscopic study of some chromium–oxygen systems10.1002/sia.740130210 ↗
16. Compositional and structural analysis of aluminum oxide films prepared by plasma-enhanced chemical vapor deposition10.1016/0040-6090(94)90238-0 ↗
17. Structural and mechanical properties of Cr–Al–O–N thin films grown by cathodic arc deposition10.1016/j.actamat.2012.08.010 ↗
18. Very low emittance solar selective surface using new film structure10.1063/1.351510 ↗
19. Raman spectroscopy and X-ray diffraction of phase transitions in Cr2O3 to 61GPa10.1103/PhysRevB.69.144107 ↗
20. Raman spectra of synthetic sapphire10.1016/S0026-2692(01)00087-8 ↗