Highly stable Ag–Ni based transparent electrodes on PET substrates for flexible organic solar cells
Source abstract
Abstract
Abstract We report a novel transparent electrode structure made of Ag–Ni bilayer on polyethylene terephtalate (PET) substrates. However, without any adequate countermeasure, such an ultrathin layer would uninvitedly oxidize even at ambient conditions due to permeation of moisture and oxygen through the polymer substrates. A combination of heat and Ar plasma pretreatment was found to significantly increase the stability of the metals layers deposited onto polymer substrates. The 1 nm Ni capping layer provides higher work function together with stability to the underlying Ag conducting layer over time and in harsh conditions of 85 °C and 85% relative humidity. The obtained Ag–Ni bilayer ultrathin films show average transparency of 75% in the visible region and sheet resistance of 11 Ω/sq. To demonstrate its operational potential, the electrode has been used as the transparent anode in an organic solar cell (OSC), which shows an overall photon conversion efficiency of >90% of the indium tin oxide (ITO) based cell which was measured to be 2.67%. With respect to ITO, the proposed transparent electrode has several advantages, including mechanical flexibility, room temperature processing and low cost.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Transparent conductive Al-doped ZnO films for liquid crystal displays10.1063/1.2206417 ↗
2. ZnO transparent conducting films deposited by pulsed laser deposition for solar cells applications10.1016/S0040-6090(03)00243-8 ↗
3. Transparent ZnO thin-film transistor fabricated by RF magnetron sputtering10.1063/1.1553997 ↗
4. On the road to inexpensive, sub-ppb, room temperature ozone detectors10.1166/sl.2008.507 ↗
5. ZnO thin films for cantilever coatings: structural and mechanical properties, observations of photoplastic effect10.1166/sl.2008.429 ↗
6. Preparation of high quality ITO films on a plastic substrate using RF magnetron sputtering10.1016/j.surfcoat.2006.01.004 ↗
7. Thin films engineering of indium tin oxide: large area flat panel displays application10.1016/j.surfcoat.2005.08.144 ↗
8. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide10.1016/j.solmat.2009.04.020 ↗
9. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
10. G.B. Murdoch, Transparent conductive oxides for organic electronics, Thesis, Department of Materials Science and Engineering, University of Toronto, 2010.
11. Conducting and transparent single-wall carbon nanotube electrodes for polymer-fullerene solar cells10.1063/1.2132065 ↗
12. Transparent, conductive carbon nanotube films10.1126/science.1101243 ↗
13. Continuous, highly flexible, and transparent graphene films by chemical vapor deposition for organic photovoltaics10.1021/nn901587x ↗
14. Ultrathin metal films as an alternative to TCOs for optoelectronic applications
15. Solution-processed metal nanowire mesh transparent electrodes10.1021/nl073296g ↗
16. High figure-of-merit ultrathin metal transparent electrodes incorporating a conductive grid10.1063/1.3299259 ↗
17. Ultrathin Cu–Ti bilayer transparent conductors with enhanced figure-of merit and stability10.1063/1.3341201 ↗
18. Nickel as an alternative semitransparent anode to indium tin oxide for polymer LED applications10.1088/0957-4484/20/27/275204 ↗
19. Semi-transparent metal electrode of Cu–Ni as a replacement of an ITO in organic photovoltaic cell10.1016/j.solmat.2010.12.040 ↗
20. Transparent and conductive electrodes based on unpatterned, thin metal films
21. Efficiency enhancement of organic solar cells using transparent plasmonic Ag nanowire electrodes10.1002/adma.201001395 ↗
22. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
23. Investigation of low resistance transparent MoO3/Ag/MoO3 multilayer and application as anode in organic solar cells10.1016/j.tsf.2009.12.031 ↗
24. Permeation barrier properties of thin oxide films on flexible polymer substrates10.1016/j.tsf.2008.11.089 ↗
25. A study of defects in ultra-thin transparent coatings on polymers10.1016/S0257-8972(99)00152-8 ↗
26. Morphology and gas barrier properties of thin SiOx coatings on polycarbonate: Correlations with plasma-enhanced chemical vapor deposition conditions10.1557/JMR.2000.0103 ↗
27. Durability of nanosized oxygen-barrier coatings on polymers10.1016/S0079-6425(02)00002-6 ↗
28. Stress controlled gas-barrier oxide coatings on semi-crystalline polymers10.1016/j.tsf.2005.02.020 ↗
29. Organic light-emitting devices with extended operating lifetimes on plastic substrates10.1063/1.1514831 ↗
30. Transparent hybrid inorganic/organic barrier coatings for plastic organic light-emitting diode substrates10.1116/1.1913680 ↗
31. Ultrahigh barrier coating deposition on polycarbonate substrates10.1116/1.1705646 ↗
32. Mechanisms of vapor permeation through multilayer barrier films: Lag time versus equilibrium permeation10.1063/1.1768610 ↗
33. Organic light-emitting diode with indium-free metallic bilayer as transparent anode10.1016/j.orgel.2011.02.015 ↗
34. Onset of electrical conduction in Pt and Ni films10.1063/1.357822 ↗
35. Growth, morphology, and optical and electrical properties of semicontinuous metallic films10.1103/PhysRevB.67.035318 ↗
36. Characterization of silver films deposited by radio frequency magnetron Sputtering10.1116/1.578856 ↗
37. M.S. Islam, Z. Li , S.C. Chang, D.A.A. Ohlberg, D.R. Stewart, S.Y. Wang, R.S. Williams, in: Proceedings of the IEEE Conference Nanotechnology, 5th IEEE, Nagoya, Japan, vol. 80, 2005, p. 83.
38. Studies of nucleation and the initial stages of film growth10.1080/10408439008242185 ↗
39. Morphology of thin silver film grown by dc sputtering on Si(001)10.1088/0022-3727/31/23/001 ↗
40. Deposition of indium–tin-oxide films on polymer substrates for application in plastic-based flat panel displays10.1016/S0040-6090(01)01489-4 ↗
41. Roll-to-roll production of 30-inch graphene films for transparent electrodes
42. Smooth, transparent, conducting and flexible SWCNT films by filtration–wet transfer Processes