journal article·2017-04

Characteristics of Cu 2 ZnSn(S x Se 1−x ) 4 thin-film solar cells prepared by sputtering deposition using single quaternary Cu 2 ZnSnS 4 target followed by selenization/sulfurization treatment

Yu-Pin Lin, Tsung-Eong Hsieh, Yen-Chih Chen, Kun-Ping Huang

Publisher page

Abstract

Abstract This work demonstrates the preparation of Cu 2 ZnSn(S x Se 1- x ) 4 (CZTSSe) thin films by sputtering deposition using single-phase Cu 2 ZnSnS 4 (CZTS) target followed by selenization/sulfurization treatment at 570 °C for 1 h. Afterward, the CZTSSe thin-film solar cell samples with the Mo/CZTSSe/CdS/ i -ZnO/IZO/Al structure were prepared and their performances were evaluated. By varying the ratio of Se and S powders of heat treatment, the Cu-poor/Zn-rich CZTSSe layers with S/(S+Se) ratio in the range of 0.21–1 were achieved and the CZTSSe layers were the mixture of kesterite CZTS and CZTSe phases as revealed by the x -ray diffraction and the Raman spectroscopy analyses. UV-NIR spectroscopy indicated the bandgaps of CZTSSe samples are in the range of 1.06–1.45 eV when the S/(S+Se) ratio varies from 0.21 to 1. Hall measurement observed the best transport property with p -type carrier concentration of 2.17×10 15 cm −3 and mobility of 8.9 cm 2 V −1 sec −1 in CZTSSe layer with S/(S+Se) ratio of 0.46. Under the AM1.5 illumination condition, the CZTSSe thin-film solar cell sample with S/(S+Se) ratio of 0.46 exhibited the best performance with open-circuit voltage of 0.506 V, short-circuit current density of 27.41 mA/cm 2 , fill factor of 50% and conversion efficiency of 6.9%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Sentaurus modeling of 6.9% Cu2ZnSnS4 device based on comprehensive electrical & optical characterization10.1016/j.solmat.2016.10.053 ↗
2. Updated assessment of possibilities and limits for solar cells10.1002/adma.201304620 ↗
3. Preparation of Cu2ZnSnS4 (CZTS) sputtering target and its application to the fabrication of CZTS thin-film solar cells10.1016/j.jallcom.2015.09.111 ↗
4. Preparation of Cu2ZnSnS4 single crystals from Sn solutions10.1016/j.jcrysgro.2011.12.046 ↗
5. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
6. Cu2ZnSnS4-type thin film solar cells using abundant materials10.1016/j.tsf.2006.12.103 ↗
7. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
8. Controlled substitution of S by Se in reactively sputtered CZTSSe thin films for solar cells10.1016/j.jallcom.2015.06.276 ↗
9. Characteristics of Cu2ZnSnSe4 and Cu2ZnSn(Se,S)4 absorber thin films prepared by post selenization and sequential sulfurization of co-evaporated Cu-Zn-Sn precursors10.1016/j.jallcom.2013.06.064 ↗
10. B.Shin, K.Wang, O.Gunawan, K.B.Reuter, S.J.Chey, N.A.Bojarczuk, T.Todorov, D.B.Mitzi, S.Guha, High efficiency Cu2ZnSn(SxSe1−x)4 thin film solar cells by thermal co-evaporation, in: Proceedings of the 37th IEEE Photovoltaic Specialists Conference, 2011.
11. Preparation and characterization of Cu2ZnSn(SxSe1−x)4 thin films by synchronous sulfo-selenization of single source evaporated metallic precursors10.1007/s40195-014-0098-3 ↗
12. Cu2ZnSn(S1-xSex)4 based solar cell produced by selenization of vacuum deposited precursors10.1016/j.solmat.2012.02.016 ↗
13. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
14. G.Y.Kim, D.-H.Son, T.T.T.Nguyen, S.Yoon, M.Kwon, C.-W.Jeon, D.-H.Kim, J.-K.Kang, W.Jo, Influence of the ZnS precursor thickness on high efficiency Cu2ZnSn(S,Se)4 thin-film solar cells grown by stacked-sputtering and selenization process, in: Proceedings of the 42nd IEEE Photovoltaic Specialists Conference, 2015.10.1109/PVSC.2015.7356411 ↗
15. Cu2ZnSn(S,Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors10.1016/j.tsf.2012.10.042 ↗
16. Effect of the stacked structure on performance in CZTSSe thin film solar cells10.1016/j.apsusc.2015.05.104 ↗
17. Effects of SnSe2 secondary phases on the efficiency of Cu2ZnSn(Sx,Se1-x)4 based solar cells10.1016/j.tsf.2014.10.058 ↗
18. Characterization of Cu2ZnSn(S,Se)4 film by selenizing Cu2ZnSnS4 precursor film from co-sputtering process10.1016/j.matlet.2016.04.039 ↗
19. Improvement of CZTSSe thin film solar cell by introducing a three-layer structure precursor10.1016/j.matlet.2016.02.078 ↗
20. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nano-crystals10.1021/ja108427b ↗
21. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗
22. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
23. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
24. A high efficiency electrodeposited Cu2ZnSnS4 solar cell10.1002/aenm.201100526 ↗
25. 3.6%-CZTSSe device fabricated from ionic liquid electro-deposited Sn layer10.2174/1876531901305010021 ↗
26. Kesterite Cu2ZnSn(S,Se)4 solar cells with beyond 8% efficiency by a sol–gel and selenization process10.1021/acsami.5b01151 ↗
27. Studies of the fine-grain sub-layer in the printed CZTSSe photovoltaic devices10.1039/c4tc00391h ↗
28. Improvement in the properties of CZTSSe thin films by selenizing single-step electrodeposited CZTS thin films10.1016/j.jallcom.2014.12.253 ↗
29. Low cost preparation of Cu2ZnSnS4 and Cu2ZnSn(SxSe1-x)4 from binary sulfide nanoparticles for solar cell application10.1016/j.jpowsour.2014.03.075 ↗
30. Acceptor-donor transition and electrical property of Cu-deficient (Cu2-xZnx)ZnSnSe4 (x=0-0.3) Bulks10.1149/2.0061409ssl ↗
31. Effect of post-sulfurization on the composition, structure and optical properties of Cu2ZnSnS4 thin films deposited by sputtering from a single quaternary target10.1016/j.apsusc.2012.09.140 ↗
32. Structure and optical properties of Cu2ZnSnS4 thin film absorbers from ZnS and Cu3SnS4 nanoparticle precursors10.1016/j.tsf.2012.10.034 ↗
33. Growth and characterization of Cu2ZnSn(S,Se)4 thin films for solar cells10.1016/j.solmat.2012.02.031 ↗
34. Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: an experimental study10.1016/j.jallcom.2011.08.099 ↗
35. A facile and low-cost synthesis of promising absorber materials on Cu2ZnSn(Sx,Se1-x)4 nanocrystals consisting of earth abundant elements with tunable band gap characteristics10.1039/c2jm33802e ↗
36. Impact of Cu2ZnSn(SexS1-x)4 (x=0.3) compositional ratios on the monograin powder properties and solar cells10.1016/j.tsf.2012.10.031 ↗
37. Photoluminescence and Raman study of Cu2ZnSn(SexS1-x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
38. Effect of post sulfurization temperature on the microstructure of Cu2ZnSn(S,Se)4 thin film10.1016/j.matlet.2015.06.067 ↗
39. Optical spectroscopy, optical conductivity, dielectric properties and new methods for determining the gap states of CuSe thin films10.1016/j.jallcom.2010.08.022 ↗
40. Kesterite Thin-film solar cells advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
41. Polarized Raman spectroscopy of Cu-poor and Zn-rich single-crystal Cu2ZnSnSe410.1063/1.4900560 ↗
42. Cu2ZnSnSe4 thin-film solar cells fabricated using Cu2SnSe3 and ZnSe bilayers10.7567/APEX.8.042301 ↗
43. Reduced interface recombination in Cu2ZnSnS4 solar cells with atomic layer deposition Zn1−xSnxOy buffer layers10.1063/1.4937998 ↗
44. Boosting the efficiency of pure sulfide CZTS solar cells using the In/Cd-based hybrid buffers10.1016/j.solmat.2015.10.019 ↗
45. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
46. Cliff-like conduction band offset and KCN-induced recombination barrier enhancement at the CdS/Cu2ZnSnS4 thin-film solar cell heterojunction10.1063/1.3663327 ↗
47. Cu2ZnSnS4−xSex solar cells fabricated with precursor stacked layer ZnS/Cu/SnS by a CBD method10.1016/j.solmat.2014.12.027 ↗
48. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗