An analysis of glass–glass CIGS manufacturing costs
Source abstract
Abstract
Abstract This article examines current cost drivers and potential avenues to reduced cost for monolithic, glass–glass Cu(In,Ga)(Se,S)2 (CIGS) modules by constructing a comprehensive bottom-up cost model. For a reference case where sputtering plus batch sulfurization after selenization (SAS) is employed, we compute a manufacturing cost of $69/m2 if the modules are made in the United States at a 1 GW/year production volume. At 14% module efficiency, this corresponds to a manufacturing cost of $0.49/WDC and a minimum sustainable price (MSP) of $0.67/WDC. We estimate that MSP could vary within ±20% of this value given the range of quoted input prices, and existing variations in module design, manufacturing processes, and manufacturing location. Potential for reduction in manufacturing costs to below $0.40/WDC may be possible if average production module efficiencies can be increased above 17% without increasing $/m2 costs; even lower costs could be achieved if $/m2 costs could be reduced, particularly via innovations in the CIGS deposition process or balance-of-module elements. We present the impact on cost of regional factors, CIGS deposition method, device design, and price fluctuations. One metric of competitiveness-levelized cost of energy (LCOE) – is also assessed for several U.S. locations and compared to that of standard multi-crystalline silicon (m(c-Si)) and cadmium telluride (CdTe).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Economic Growth and Productivity · Economic and Technological Innovation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Photovoltaic degradation rates – an analytical review10.1002/pip.1182 ↗
2. Inside TSMC׳s 16.5% CIGS module world record
3. Solar Frontier hits 22.3% on CIGS Cell
4. Solar Frontier (Online). Available: 〈http://www.solar-frontier.com/eng/company/index.html〉(accessed 09.05.15).
5. S. Schuler I. Luck J. Total cost of ownership for cigs thin film PV module production, Presented at 4th Thin-Film Industry Forum [Online] 2012. (Available) 〈http://www.picon-solar.de/download/Total%20cost%20of%20ownership%20for%20CIGS%20thin%20film%20PV%20module% 20production.pdf〉.
6. A. Goodrich, T. James, M. Woodhouse, Solar PV manufacturing cost analysis: US competitiveness in a global industry, Presented at Stanford University Precourt Institute for Energy (online), 2011. Available: 〈http://www.nrel.gov/docs/fy12osti/53938.pdf〉.
7. V.K. Kapur, A. Bansal, S. Roth, Roadmap for manufacturing cost competitive CIGS modules, Presented at 38th IEEE Photovoltaics Specialist Conference, 2012, pp. 3343–3348.10.1109/PVSC.2012.6318289 ↗
8. K. Yamada, T. Inoue K, Waki, Future prospects of photovoltaic systems for mitigating global warming, Presented at World Engineers Convention, Geneva, September 2011.
9. CIGS manufacturing: promises and reality
10. T. Inoue, K. Waki, K. Yamada, Cost estimates for PV manufacturing through 2030 – potential for reducing module cost using high-efficiency Si-based tandem solar cells, Presented at 29th European Photovoltaic Solar Energy Conference and Exhibition, September 2014, pp. 1236–1238.
11. A comparative analysis of energy costs of photovoltaic, solar thermal, and wind electricity generation technologies10.3390/app3020325 ↗
12. CdTe, CIGS and a-Si thin film PV technologies: factors impacting LCOE10.1117/12.894352 ↗
13. Economic measurements of polysilicon for the photovoltaic industry: market competition and manufacturing competitiveness10.1109/JPHOTOV.2014.2388076 ↗
14. A wafer-based monocrystalline silicon photovoltaics road map: utilizing known technology improvement opportunities for further reductions in manufacturing costs10.1016/j.solmat.2013.01.030 ↗
15. Perspectives on the pathways for cadmium telluride module manufacturers to address expected increases in the price of tellurium10.1016/j.solmat.2012.03.023 ↗
16. K.A.W. Horowitz, M. Woodhouse, Assessing the cost and potential of monolithic CIGS modules, in: Proceedings of the 42nd IEEE Photovoltaic Specialists Conference, 2015.10.1109/PVSC.2015.7355960 ↗
17. Microstructural properties of Cu(In,Ga)Se2 thin films used in high efficiency devices10.1016/S0040-6090(00)01724-7 ↗
18. B. Dimmler, CIGS and CdTe based thin film PV modules, an industrial revolution, Presented at 38th IEEE Photovoltaic Specialist Conference, June 2012, pp. 2494–2499.10.1109/PVSC.2012.6318101 ↗
19. Cu(Ga,In)Se2 solar cells
20. Present status and future prospects of CIGSS solar cells10.1016/j.solmat.2006.02.018 ↗
21. CIGS absorbers and processes10.1002/pip.969 ↗
22. R. Fu, T.L. James, D. Chung, D. Gagne, A. Lopez, A. Dobos, Economic competitiveness of U.S. utility-scale photovoltaic systems in 2015: regional cost modeling of installed cost ($/W) and LCOE ($/kWh), in: Proceedings of the 42nd IEEE Photovoltaic Specialists Conference, June 2015.
23. 9Dimen International Information Consulting Co., Ltd. 2015 Market Research Report on Global Solar PV Glass Industry, January 15, 2015, 〈http://www.radiantinsights.com/research/solar-pv-glass-market-research-report-2015〉.
24. D. Hermann, et al., CIGS module manufacturing with high deposition rates and efficiencies, in: Proceedings of the 40th IEEE Photovoltaic Specialists Conference, June 2014, pp. 2775–2777.10.1109/PVSC.2014.6925505 ↗
25. CIGS solar cells on the way to mass production: process statistics of a 30cm×30cm module line10.1016/S0927-0248(00)00301-9 ↗
26. Global Solar website, Technology, 〈http://www.globalsolar.com/company/technology〉.
27. The capital intensity of photovoltaics manufacturing: barrier to scale and opportunity for innovation10.1039/C5EE01509J ↗
28. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
29. The influence of absorber thickness on Cu(In,Ga)Se2 solar cells with different buffer layers10.1109/JPHOTOV.2013.2276030 ↗
30. Numerical modeling of ultra thin Cu(In,Ga)Se2 solar cells10.1016/j.egypro.2012.02.034 ↗
31. Potential of submicrometer thickness Cu(In,Ga)Se2 solar cells10.1063/1.2128054 ↗