journal article·2011-02

Effects of deposition temperature on characteristics of Ga-doped ZnO film prepared by highly efficient cylindrical rotating magnetron sputtering for organic solar cells

Jun-Hyuk Park, Kyung-Jun Ahn, Seok-In Na, Han-Ki Kim

Publisher page

Abstract

Abstract We report the characteristics of Ga-doped zinc oxide (GZO) films prepared by a highly efficient cylindrical rotating magnetron sputtering (CRMS) system as a function of substrate temperature for use as a transparent conducting electrode in bulk hetero-junction organic solar cells (OSCs). Using a rotating cylindrical GZO target, low sheet resistance (∼11.67 Ω/square) and highly transparent (90%) GZO films were deposited with high usage (∼80%) of the cylindrical GZO target. High usage of the cylindrical GZO target in the CRMS system indicates that CRMS is a promising deposition technique to prepare cost-efficient GZO electrodes for low cost OSCs. Resistivity and optical transmittance of the CRMS-grown GZO film were mainly affected by substrate temperature because the grain size and activation of the Ga dopant were critically dependent on the substrate temperature. In addition, the performance of OSC fabricated on GZO electrode sputtered at 230 °C (11.67 Ω/square) is better than OSC fabricated on as-deposited GZO electrode (29.20 Ω/square). OSCs fabricated on the GZO electrode sputtered at 230 °C showed an open circuit voltage of 0.558 V, short circuit current of 8.987 m A/cm 2 , fill factor of 0.628 and power conversion efficiency of 3.149%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Transparent anodes for polymer photovoltaics : oxygen permeability of PEDOT10.1016/j.solmat.2006.11.006 ↗
2. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
3. An explanation for the high stability of polycarboxythiophenes in photovoltaic devices—a solid-state NMR dipolar recoupling study10.1016/j.solmat.2007.11.008 ↗
4. Upscaling of polymer solar cell fabrication using roll-to-roll processing10.1039/b9nr00430k ↗
5. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
6. Testicular toxicity evaluation of indium–tin oxide10.1539/joh.44.105 ↗
7. Highly efficient blue organic light emitting device using indium-free transparent anode Ga:ZnO with scalability for large area coating
8. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
9. Aluminum doped zinc oxide for organic photovoltaics10.1063/1.3142423 ↗
10. Ga-doped ZnO film as a transparent electrode for phthalocyanine/perylene heterojunction solar cell10.1143/JJAP.47.867 ↗
11. Influence of deposition on the reactive sputter behavior during rotating cylindrical magnetron sputtering
12. New target materials for innovative applications on glass10.1016/j.vacuum.2008.04.065 ↗
13. An Al-doped ZnO electrode grown by highly efficient cylindrical rotating magnetron sputtering for low cost organic photovoltaics10.1088/0022-3727/43/11/115101 ↗
14. High power impulse magnetron sputtering using a rotating cylindrical magnetron10.1116/1.3271136 ↗
15. Low resistivity Ga-doped ZnO thin films of less than 100nm thickness prepared by ion plating with direct current arc discharge10.1063/1.2767213 ↗
16. Effect of rapid thermal annealing on electrical and optical properties of Ga doped ZnO thin films prepared at room temperature10.1063/1.2369544 ↗
17. Substrate temperature dependence of the properties of Ga-doped ZnO films deposited by DC reactive magnetron sputtering10.1016/j.vacuum.2006.12.010 ↗
18. Ga-doped ZnO films grown on GaN templates by plasma-assisted molecular-beam epitaxy10.1063/1.1331089 ↗
19. Effect of rapid thermal annealing on electrical and optical properties of Ga doped ZnO thin films prepared at room temperature10.1007/s00340-005-2064-2 ↗
20. Low temperature conduction and scattering behavior of Ga-doped ZnO10.1063/1.2824857 ↗
21. Influence of growth temperature on the characteristics of Ga-doped ZnO thin films deposited by magnetron sputtering10.1143/JJAP.48.08HK04 ↗
22. G.P. Crawford, Flexible flat panel displays, Chapter 5, in: Transparent Conducting Oxide Materials and Technology, Wiley, NJ, USA, 2005, pp. 78–98, ISBNL:0470870486.
23. Highly conductive and transparent aluminum-doped zinc oxide thin films prepared by pulsed laser deposition in oxygen ambient10.1063/1.1415544 ↗
24. Optical properties and electronic structure of amorphous germanium10.1002/pssb.19660150224 ↗
25. Electrical, optical, and structural properties of indium–tin–oxide thin films for organic light-emitting devices10.1063/1.371708 ↗
26. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
27. The interpretation of the properties of indium antimonide10.1088/0370-1301/67/10/306 ↗
28. High-performance transparent conducting Ga-doped ZnO Films deposited by RF magnetron sputter deposition
29. B.D. Cullity, Elements of X-ray diffraction, second ed., Chapter 9, in: Structure of Polycrystalline Aggregates, Addison-Wesley, FL, USA, 1978, pp. 281–321, ISBN:0201011743.
30. Gallium-doped zinc oxide films as transparent electrodes for organic solar cell applications10.1063/1.2750410 ↗
31. Organic photovoltaic devices with Ga-doped ZnO electrode10.1063/1.2432951 ↗
32. Room temperature indium free Ga:ZnO/Ag/Ga:ZnO multilayer electrode for organic solar cell applications10.1149/1.3149537 ↗
33. Effective variables to control the fill factor of organic photovoltaic cells10.1021/am900155y ↗