journal article·2013-05

Effects of particle morphology of ZnO buffer layer on the performance of organic solar cell devices

P.S. Mbule, T.H. Kim, B.S. Kim, H.C. Swart, O.M. Ntwaeaborwa

Publisher page

Abstract

The performance of poly(3-hexyltheopene):[6,6]-phenyl C61-butyric acid methyl ester or P3HT:PCBM based organic solar cell (OSC) devices can be improved by adding an electron extraction layer of a wide band gap semiconducting material such as ZnO or TiO2 that facilitates the electron transport from the photo-active layer (P3HT:PCBM blend) to the top metal electrode (e.g. Al) and, at the same time, blocks holes from reaching the top electrode. Other factors that determine performance of the OSC devices include morphology, thickness and donor–acceptor ratio. In this study we investigated the effects of concentration and particle morphology (nanoparticle versus nanoflake) of ZnO electron extraction layer on the performance of the OSC devices with configuration ITO/PEDOT:PSS/P3HT:PCBM/ ZnO/Al. The concentration of ZnO nanoparticle or nanoflake solutions was varied from 0.5 to 20 mg/ml. A power conversion efficiency (PCE) of 3.08% was recorded from devices incorporating ZnO nanoflake electron extraction layer, whereas PCE of 2.37% was recorded from devices with ZnO nanoparticles as the electron extraction layer. The maximum PCE was obtained from a concentration of 0.5 mg/ml ZnO for both devices. The influence of the particle morphology and the concentration of the ZnO electron extraction layer on the general performance of the OSC devices is discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Solution-processed nanocrystalline TiO2 buffer layer used for improving performance of organic photovoltaics10.1021/am101202k ↗
2. Enhancing performance of organic-inorganic hybrid solar cells using a fullerene interlayer from all solution processing10.1016/j.solmat.2009.08.019 ↗
3. High photovoltaic performance of a low bandgap polymer10.1002/adma.200501717 ↗
4. Ochiai · Transactions on Electrical and Electronic Materials · 2012 · 13 · 4310.4313/TEEM.2012.13.1.43 ↗
5. Charge formation, recombination, and sweep-out dynamics in organic solar cells10.1002/adfm.201101632 ↗
6. Stability of polymer cells10.1002/adma.201104187 ↗
7. Air-stable polymer electronic devices10.1002/adma.200602653 ↗
8. Roll-to-Roll fabrication polymer cells10.1016/S1369-7021(12)70019-6 ↗
9. Hybrid polymer–CdSe solar cells with a ZnO nanoparticle buffer layer for improved efficiency and lifetime10.1039/c0jm03799k ↗
10. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
11. ZnO nano-bridge structure and its application in inverted polymer solar cell10.1016/j.orgel.2009.08.011 ↗
12. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer cell10.1002/adfm.201101915 ↗
13. F. de Jes´us Peet Poot, Synthesis of ZnO and TiO2 nanoparticles10.1007/s10971-005-6620-3 ↗
14. G.A. Luurtsema, C.J. Spanos, T.J. King, Spin Coating for Rectangular Substrates, MSc Thesis, University of Carlifornia, Berkeley, 1997.
15. Effect of polymer processing on the performance of poly(3-hexylthiophene)/ZnO nanorod photovoltaic devices
16. Photoluminescence of ZnO quantum dots produced by a sol–gel process10.1016/j.optmat.2007.06.001 ↗
17. Chemical synthesis and visible photoluminescence emission from monodispersed ZnO nanoparticles
18. K. Ogawa, Ultrafast frequency shifting by absorption saturation of quantum-well excitons in a photonic-band structure, in: Proceedings of the XXVIIth General Assembly of the International Union of Radio Science, Maastricht-The Netherlands, 17–24 August 2002 pp. 1495–1498
19. ZnO nanoparticles with hexagonal cone, hexagonal plate, and rod shapes: synthesis and characterization10.5012/bkcs.2008.29.10.1960 ↗
20. A hybrid electrochemical thermal method for the preparation of large ZnO nanoparticles10.1007/s11051-009-9846-0 ↗
21. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
22. Manipulating regioregular poly(3-hexyltheophene):[6,6]-phenyl-C61-butyric acid methyl ester blends-route towards high efficiency polymer solar cells10.1039/b703075b ↗
23. Post-fabrication annealing effects on the performance of P3HT:PCBM solar cells with/without ZnO nanoparticles10.1016/j.physb.2011.09.103 ↗
24. The importance of post annealing in the device performace of poly(3-hexyl-thiophene): methanofullerene polymer solar cells10.1016/j.solmat.2006.11.010 ↗