Stability enhancement of organic solar cells with solution-processed nickel oxide thin films as hole transport layers
Source abstract
Abstract
Abstract One of the main causes of the degradation of organic solar cells is the interface between the indium tin oxide (ITO) anode and the poly (3,4-ethylendioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) hole transport layer (HTL), which is known to be unstable. On the contact surface, corrosion of the ITO is induced by PEDOT:PSS, and this degrades the performance of the device. In this paper, we solve this problem by introducing an inorganic HTL, nickel oxide (NiO), between the ITO and the active layer. Solution process, a low-cost production method for preparing thin films, is employed to fabricate the NiO HTL for organic solar cells based on poly (3-hexylthiophene) (P3HT) and [6,6]-phenyl C61-butyric acid methyl ester (PCBM). The performance of the resulting organic solar cells is optimized by modifying the baking conditions of the NiO thin films, yielding a power conversion efficiency enhancement of 1.97% and fill factor of 52.11%. Moreover, a remarkable improvement in cell lifetime is observed. X-ray photoelectron spectroscopy studies show that cell performance and stability strongly depend on the oxygen composition ratio of the NiO structure. The transition of the O2− ratio is a key factor that determines the conductivity of NiO. These results compare favorably with those reported in the literature for conventional devices with PEDOT:PSS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Stability of polymer solar cells10.1002/adma.201104187 ↗
2. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
3. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
4. Polymer light-emitting diodes with polyethylene dioxythiophene-polystyrene sulfonate as the transparent anode10.1016/S0379-6779(97)03823-X ↗
5. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
6. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
7. Study of buffer layer thickness on bulk heterojunction solar cell10.1166/jnn.2010.2960 ↗
8. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
9. Enhanced hole injections in organic light emitting devices by depositing nickel oxide on indium tin oxide anode10.1063/1.1505112 ↗
10. p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells10.1073/pnas.0711990105 ↗
11. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
12. Fonash · 2010
13. Effect of solution-processed NiO thin film as a hole transport layer in Poly(3-hexylthiophene): [6,6]-phenyl C61-butyric acid methyl ester bulk heterojunction solar cells10.1166/jnn.2012.4581 ↗
14. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
15. XRD and XPS characterization of electrochromic nickel oxide thin films prepared by electrolysis-chemical deposition10.1039/a806459h ↗
16. Electrical conductivity and thermodynamic Equilibrium in nickel oxide10.1063/1.1701231 ↗
17. Electrical properties of NiO10.1103/PhysRev.93.1199 ↗
18. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
19. X-ray photoelectron spectroscopic chemical state quantification of mixed nickel metal, oxide and hydroxide systems10.1002/sia.3026 ↗
20. The influence of defects on the Ni 2p and O 1s XPS of NiO
21. Characterization of oxygen species adsorbed on copper and nickel oxides by x-ray photoelectron spectroscopy10.1016/0039-6028(72)90103-3 ↗
22. Evidence from photoelectron spectroscopy for dissociative adsorption of oxygen on nickel oxide10.1016/0039-6028(81)90449-0 ↗
23. The defect structure of nickel oxide surfaces as revealed by photoelectron spectroscopy10.1039/f19848002957 ↗
24. Surface electronic structure of NiO: Defect states, O2 and H2O interactions10.1103/PhysRevB.32.6764 ↗
25. X-ray photoelectron spectra of defective nickel oxide10.1039/f19888403501 ↗
26. Surface effects in the Ni 2p x-ray photoemission spectra of NiO10.1103/PhysRevB.75.233417 ↗
27. Nonlocal screening effects in 2p x-ray photoemission spectroscopy core-level line shapes of transition metal compounds
28. Investigation of surface and non-local screening effects in the Ni 2p core level photoemission spectra of NiO10.1016/j.cplett.2010.11.050 ↗