journal article·2016-01

Polychromic Al–AlN cermet solar absorber coating with high absorption efficiency and excellent durability

Chengbing Wang, Jing Shi, Zhongrong Geng, Xiaoming Ling

Publisher page

Abstract

Al–N cermet solar selective coatings with double absorbing layers were deposited on Al substrates via a home-made DC magnetron sputter system. The as-deposited coatings showed a high solar absorptance of 0.942 and a normal emittance of 0.066 at 80 °C. Thermal accelerated aging tests results showed that the coatings are durable for at least 25 years. Neutral salt spray test showed that the coating presents excellent corrosion stability because the optical performance (absorptance and emittance) of the coating remained almost unchanged after a 200 h test. The structural, chemical, and optical evolution of the coatings with heat treatment in air was comprehensively investigated. Our research clearly indicated that the as-deposited double cermet layer Al–AlN solar absorber coatings can be used for solar-thermal flat plate collectors. Furthermore, we obtained different colored Al–AlN cermet coatings in a wide range only by tuning the thickness of the Al–AlN (LMVF) and AlN anti-reflective (AR) layers, while maintaining high absorptance (>0.90) and low emittance (<0.10). These coatings are colored blue, purple, red, yellowish orange, and yellow, can be easily produced via a commercial production process, and are suitable for building integration solar energy saving systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Seraphin · Top. Appl. Phys. · 1979 · 31 · 24
2. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
3. Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane10.1016/j.solmat.2009.05.023 ↗
4. Optical properties of DC reactively sputtered thin films10.1016/0040-6090(84)90364-X ↗
5. Sputtered solar selective absorbing surfaces based on aluminum and stainless steel composites10.1016/0165-1633(84)90060-1 ↗
6. Graded Al–N/Al solar selective absorbing surface
7. Spectrally selective Al/AlN/Al/AlN tandem solar absorber by inline reactive ac magnetron sputtering10.1179/026708410X12786785573436 ↗
8. A cylindrical magnetron sputtering system for depositing metal–aluminium nitride cermet solar coatings onto batches of tubes10.1116/1.581079 ↗
9. Stainless-steel–AlN cermet selective surfaces deposited by direct current magnetron sputtering technology10.1016/S0927-0248(97)00274-2 ↗
10. New cermet solar coatings for solar thermal electricity applications10.1016/S0038-092X(98)00064-4 ↗
11. High performance Al–N cermet solar coatings deposited by a cylindrical direct current magnetron sputter coater10.1116/1.581955 ↗
12. New cermet film structures with much improved selectivity for solar thermal applications10.1063/1.106602 ↗
13. Very low-emittance solar selective surfaces using new film structures10.1063/1.351510 ↗
14. High solar performance selective surface using bi-sublayer cermet film structures10.1016/0927-0248(92)90089-8 ↗
15. High-temperature optical properties and stability of AlxOy–AlNx–Al solar selective absorbing surface prepared by DC magnetron reactive sputtering10.1016/S0927-0248(02)00361-6 ↗
16. The optical properties of sputtered composite of Al–AlN10.1016/j.solmat.2005.11.006 ↗
17. Building integration of solar energy system10.1016/S0038-092X(00)00065-7 ↗
18. On the feasibility of colored glazed thermal solar collectors based on thin film interference filters10.1016/j.solmat.2004.02.045 ↗
19. Selective paint coatings for colored solar absorbers: polyurethane thickness insensitive spectrally selective (TISS) paints (Part II)10.1016/j.solmat.2006.07.012 ↗
20. Chromaticity and optical properties of colored and black solar-thermal absorbing coatings10.1016/j.solmat.2010.05.019 ↗
21. Colored solar selective absorbing coatings with metal Ti and dielectric AlN multilayer structure10.1016/j.solmat.2013.03.041 ↗
22. The influence of oxygen in TiAlOxNy on the optical properties of colored solar-absorbing coatings10.1016/j.solmat.2011.11.001 ↗
23. Design and analysis of colored solar selective absorbing films with three-layer structure10.1142/S0218625X12500461 ↗
24. Structure and optical properties of pulsed sputter deposited CrxOy/Cr/Cr2O3 solar selective coatings10.1063/1.2831364 ↗
25. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
26. Accelerated life testing of solar absorber coatings: testing procedure and results10.1016/S0038-092X(00)00034-7 ↗
27. Qualification test procedure for solar absorber surface durability10.1016/S0927-0248(99)00111-7 ↗
28. Round robin on accelerated life testing of solar absorber surface durability10.1016/S0927-0248(99)00113-0 ↗
29. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
30. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
31. Influence of stoichiometry and structure on the optical properties of AlNxOy films10.1088/0022-3727/46/1/015305 ↗
32. AlNxOy thin films deposited by DC reactive magnetron sputtering10.1016/j.apsusc.2010.08.076 ↗
33. Structure and mechanical properties of arc evaporated Ti–Al–O–N thin films10.1016/j.surfcoat.2006.12.006 ↗
34. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
35. Influence of microstructure on temperature-induced ageing mechanisms of different solar absorber coatings10.1016/j.solmat.2013.09.026 ↗
36. Improvement of thermal stability in the solar selective absorbing Mo–Al2O3 coating10.1016/j.solmat.2012.11.010 ↗
37. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗