Durability of switching behaviour after outdoor exposure for a suspended particle device switchable glazing
Source abstract
Abstract
Adaptive suspended particle device (SPD) switchable glazing is promising for low energy building application. SPD glazing allows light passes through it in the presence of applied voltage and block light in the absence of power supply. In this work SPD glazing performance after 3 years of outdoor exposure was evaluated. It was found that contrast ratio of SPD glazing before and after exposures changed from 1:11 to 1:10. SPD glazing surface temperature for any transparency level varies between 13 and 40 °C under indoor and outdoor thermal exposure. SPD glazing's surface temperature variation occurs due to the incident radiation level, not for the transmission level of glazing. Voltage and power requirement of SPD glazing did not vary at elevated glazing surface temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Urban Heat Island Mitigation · Image Enhancement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Thermal evaluation of a room coupled with a double glazing window with/without a solar control film for Mexico10.1016/j.applthermaleng.2016.08.156 ↗
2. Optical-switching technology for glazings10.1016/0040-6090(93)90633-Z ↗
3. Large-area smart glass and integrated photovoltaics10.1016/S0927-0248(02)00259-3 ↗
4. Solar energy materials for glazing technologies10.1016/j.solmat.2015.09.040 ↗
5. Properties, requirements, and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
6. Fenestration of today and tomorrow: a state-of-the-art review and future research opportunities10.1016/j.solmat.2011.08.010 ↗
7. Solar radiation glazing factors for window panes, glass structures and electrochromic windows in buildings–measurement and calculation10.1016/j.solmat.2013.04.032 ↗
8. Materials for intelligent sun protecting glazing10.1016/S0927-0248(99)00087-2 ↗
9. A review of conventional, advanced, and smart glazing technologies and materials for improving indoor environment10.1016/j.solmat.2016.08.026 ↗
10. Chromogenic smart materials10.1016/S1369-7021(04)00123-3 ↗
11. Materials for solar energy conversion: an overview10.1016/S0927-0248(97)00221-3 ↗
12. Electrochromic tungsten oxide films: review of progress 1993–199810.1016/S0927-0248(99)00088-4 ↗
13. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
14. High-efficiency multistable switchable glazing using smectic a liquid crystals10.1016/j.solmat.2008.10.023 ↗
15. Self-adjusting smart windows based on polymer-dispersed liquid crystals10.1016/j.solmat.2009.08.002 ↗
16. Simulation of the thickness dependence of the optical properties of suspended particle devices10.1016/j.solmat.2015.05.044 ↗
17. Modelling and electro-optical testing of suspended particle devices10.1016/j.solmat.2008.06.018 ↗
18. Thermochromic glazing of windows with better luminous solar transmittance10.1016/S0927-0248(01)00135-0 ↗
19. An empirical study of a full-scale polymer thermochromic window and its implications on material science development objectives10.1016/j.solmat.2013.03.043 ↗
20. Gasochromic smart window: optical and thermal properties, energy simulation and feasibility analysis10.1016/j.solmat.2015.09.029 ↗
21. Stability of gasochromic WO3 films10.1016/S0927-0248(00)00006-4 ↗
22. Property and performance requirements for thermotropic layers to prevent overheating in an all polymeric flat-plate collector10.1016/j.solmat.2007.12.005 ↗
23. Intelligent window using a hydrogel layer for energy efficiency10.1016/S0927-0248(98)00072-5 ↗
24. Thermo-physical behaviour and energy performance assessment of PCM glazing system configurations: a numerical analysis10.1016/j.foar.2012.10.002 ↗
25. Experimental analysis of the energy performance of a full-scale PCM glazing prototype10.1016/j.solener.2013.12.002 ↗
26. Improving thermal comfort conditions by means of PCM glazing systems10.1016/j.enbuild.2013.01.029 ↗
27. Spectral and angular solar properties of a PCM-filled double glazing unit10.1016/j.enbuild.2014.11.019 ↗
28. Regional performance targets for transparent near-infrared switching electrochromic window glazings10.1016/j.buildenv.2012.12.004 ↗
29. Effect of temperature on electrochromic device switching voltages10.1016/S0013-4686(99)00043-2 ↗
30. Simulation of electrochromic switching voltages at elevated temperatures10.1016/S0013-4686(01)00386-3 ↗
31. Smart switchable glazing for solar energy and daylight control10.1016/S0927-0248(97)00279-1 ↗
32. Toward a quantitative model for suspended particle devices: optical scattering and absorption coefficients10.1016/j.solmat.2012.12.012 ↗
33. Accelerated durability testing of electrochromic windows10.1016/S0013-4686(99)00037-7 ↗
34. Durability evaluation of electrochromic devices - an industry perspective10.1016/S0927-0248(98)00185-8 ↗
35. Chemical and optical properties of electrochromic nickel oxide films10.1016/0165-1633(86)90043-2 ↗
36. The influence of charge capacity ratio on the performance of a complementary electrochromic system10.1016/S0927-0248(98)00137-8 ↗
37. Application issues for large-area electrochromic windows in commercial buildings10.1016/S0927-0248(01)00101-5 ↗
38. E.H. Land, Light Valve and Method of Operation, U.S. Patent No. 1,955,923, 1934.
39. Electro optical characteristics of dipole suspensions10.1364/AO.8.001397 ↗
40. R.L. Saxe, Light Valve Containing Liquid Suspension Including Polymer-stabilizing Systems, U.S. Patent 4273422, 1979.
41. R.L. Saxe, Light Valve Suspension Containing Fluorocarbon Liquid, U.S. Patent US4407565, 1981.
42. S. Charapani, S.M. Slovak, R.L. Saxe, B. Fanning, SPD Films and Light Valves Comprising Same, U.S. Patent 6416827, 2002.
43. S.M. Slovak, S. Chakrapani, R.L. Saxe, Methods for Laminating Films for SPD Light Valves and SPD Light Valves Incorporating such Laminated Films, U.S. Patent US20050227061, 2005.
44. Measured overall heat transfer coefficient of a suspended particle device switchable glazing10.1016/j.apenergy.2015.09.019 ↗
45. Daylighting performance and glare calculation of a suspended particle device switchable glazing10.1016/j.solener.2016.02.051 ↗
46. First outdoor characterisation of a PV powered suspended particle device switchable glazing10.1016/j.solmat.2016.05.013 ↗
47. Behaviour of a SPD switchable glazing in an outdoor test cell with heat removal under varying weather conditions10.1016/j.apenergy.2016.08.029 ↗
48. Measured thermal performance of a combined suspended particle switchable device evacuated glazing10.1016/j.apenergy.2016.02.031 ↗
49. Measured thermal & daylight performance of an evacuated glazing using an outdoor test cell10.1016/j.apenergy.2016.05.118 ↗
50. The performance of an evacuated tube solar hot water system in a domestic house throughout a year in a northern maritime climate (Dublin)10.1016/j.solener.2016.07.052 ↗
51. Analysis of the thermal performance of a solar water heating system with flat plate collectors in a temperate climate10.1016/j.applthermaleng.2013.04.062 ↗