journal article·2013-11Open access

Optimizing ZnO nanoparticle surface for bulk heterojunction hybrid solar cells

Shuyan Shao, Kaibo Zheng, Karel Zidek, Pavel Chabera, Tõnu Pullerits, Fengling Zhang

Abstract

The performance of hybrid solar cells composed of polymer and ZnO is mainly hindered by the defects of ZnO. Here, we investigate the effects of ZnO nanoparticle surface modification with poly(ethylene oxide) (PEO) on the performance of bulk heterojunction hybrid solar cells based on poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and ZnO nanoparticles. The reference device using ZnO nanoparticles as electron acceptor shows an open-circuit voltage (VOC) of 0.83 V, a short-circuit current (JSC) of 3.00 mA/cm2, a fill factor (FF) of 0.46 and a power conversion efficiency (PCE) of 1.15%. After modification with very small amount of PEO, the PCE will be enhanced, which is attributed to less surface traps of ZnO nanoparticles with PEO modification. With optimized PEO (0.05%) modified ZnO nanoparticles as electron acceptors, the device typically shows a VOC of 0.86 V, a JSC of 3.84 mA/cm2, a FF of 0.51 and a PCE of 1.68% due to less recombination loss of carriers, smaller series resistance, and improved electrical coupling between ZnO nanoparticle and MEH-PPV. However, further increase of PEO content to 0.3% will deteriorate device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Interlayer adhesion in roll-to- roll processed flexible inverted polymer solar cells10.1016/j.solmat.2011.10.012 ↗
2. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Aesthetically pleasing conjugated polymer:fullerene blends for blue-green solar cells via roll-to-roll processing10.1021/am300156p ↗
5. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
6. The OE-A OPV demonstrator anno domini10.1039/c1ee01891d ↗
7. Manufacture, integration and demonstration of polymer solar cells in a lamp for the Lighting Africa initiative10.1039/b918441d ↗
8. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–accetor heterojunctions10.1126/science.270.5243.1789 ↗
9. Low-bandgap alternating fluorene copolymer/methanofullerene heterojunctions in efficient near-infrared polymer solar cells10.1002/adma.200600124 ↗
10. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
11. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
12. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
13. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
14. An easily synthesized blue polymer for high-performance polymer solar cells10.1002/adma.201002225 ↗
15. Improving the ordering and photovoltaic properties by extending-conjugated area of electron-donating units in polymers with D–A structure10.1002/adma.201200995 ↗
16. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
17. Preparation and characterization of fulleroid and methanofullerene derivatives10.1021/jo00108a012 ↗
18. Indene-C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
19. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
20. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
21. Hybrid nanorod–polymer solar cells10.1126/science.1069156 ↗
22. Photovoltaic devices using blends of branched CdSe nanoparticles and conjugated polymers10.1021/nl0342895 ↗
23. Interfacial nanostructuring on the performance of polymer/TiO2 nanorod bulk heterojunction solar cells10.1021/ja8079143 ↗
24. Improved performance of polymer/TiO2 nanorod bulk heterojunction photovoltaic devices by interface modification10.1063/1.2839405 ↗
25. Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer10.1002/adma.200306659 ↗
26. Enhanced stability of zinc oxide-based hybrid polymer solar cells by manipulating ultraviolet light distribution in the active layer10.1063/1.3593020 ↗
27. Applications of ZnO in organic and hybrid solar cells10.1039/c1ee01873f ↗
28. Interfacial modification to improve inverted polymer solar cells10.1039/b808004f ↗
29. Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer10.1021/ja100236b ↗
30. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
31. Influence of adsorbed oxygen on the emission properties of nanocrystalline ZnO particles10.1021/jp993998x ↗
32. Enhanced performance of inverted polymer solar cells by using poly(ethylene oxide) modified ZnO as electron transport layer10.1021/am302408w ↗
33. Excited state and charge photogeneration dynamics in conjugated polymers10.1021/jp068864f ↗