journal article·2012-06

Stability comparison: A PCDTBT/PC71BM bulk-heterojunction versus a P3HT/PC71BM bulk-heterojunction

Dong Hwan Wang, Jung Kyu Kim, Jung Hwa Seo, O Ok Park, Jong Hyeok Park

Publisher page

Abstract

Abstract In this study, the physical and chemical degradation behaviors of active layers based on semicrystalline p-type polymer (poly(3-hexylthiophene) (P3HT)) and [6,6]-phenyl C 71 butyric acid methyl-ester (PC 71 BM) are compared with the corresponding behaviors of amorphous p-type polymer of poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)] (PCDTBT) and PC 71 BM. A surface morphological study of the active layer (from Atomic force microscopy (AFM) and scanning electron microscopy (SEM) images) and a chemical analysis (from X-ray photoelectron spectroscopy (XPS) and Energy dispersive X-ray spectroscopy (EDS) results) help explain why PCDTBT/PC 71 BM bulk heterojunction (BHJ) has a higher level of long-term stability under thermal and air stability experimental conditions than a P3HT/PC 71 BM-based BHJ. The power conversion efficiency for a PCDTBT/PC 71 BM BHJ cell and a P3HT/PC 71 BM BHJ cell decreased by 11% and 21%, respectively, after a thermal stability test and by 68% and 78%, respectively, after a 300 h air stability test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. The OE-A OPV demonstrator anno domini10.1039/c1ee01891d ↗
3. The role of processing in the fabrication and optimization of plastic solar cells10.1002/adma.200802559 ↗
4. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
5. Solution-processed polymer based photovoltaic devices with concentration graded bilayers made via composition control of a poly(3-hexylthiophene)/[6,6]-phenyl C61-butyric acidmethyl ester10.1039/b926105b ↗
6. Alternating polyfluorenes collect solar light in polymer photovoltaics10.1021/ar900073s ↗
7. Significant improvement of polymer solar cell stability10.1021/cm051320q ↗
8. Enhancement of donor–acceptor polymer bulk heterojunction solar cell power conversion efficiencies by addition of Au nanoparticles10.1002/anie.201101021 ↗
9. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
10. [2-b:4,5-b′]dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
11. Efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
12. Sequential processing: control of nano-morphology in bulk heterojunction solar cells10.1021/nl202320r ↗
13. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
14. Enhanced diode characteristics of organic solar cells using titanium suboxide electron transport layer10.1063/1.3409116 ↗
15. Enhanced high-temperature long-term stability of polymer solar cells with a thermally stable TiOx Interlayer10.1021/jp9060939 ↗
16. Air-stable polymer electronic devices10.1002/adma.200602653 ↗
17. Stable inverted polymer/fullerene solar cells using a cationic polythiophene modified PEDOT:PSS cathodic interface10.1002/adfm.201000304 ↗
18. Plasmonics for improved photovoltaic devices10.1038/nmat2629 ↗
19. Enhanced power conversion efficiency in PCDTBT/PC70BM bulk heterojunction photovoltaic devices with embedded silver nanoparticle clusters10.1002/aenm.201100347 ↗
20. Photovoltaic devices with an active layer from a stamping transfer technique: single layer versus double layer10.1021/la100164k ↗
21. Unexpected solid–solid intermixing in a bilayer of poly(3-hexylthiophene) and [6,6]-phenyl C61-butyric acidmethyl ester via stamping transfer10.1016/j.orgel.2010.05.018 ↗
22. Analysis of surface morphological changes in organic photovoltaic devices: bilayer versus bulk-heterojunction10.1039/c0ee00643b ↗
23. Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells10.1002/adfm.200400521 ↗
24. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
25. A thermally stable semiconducting polymer10.1002/adma.200903420 ↗
26. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
27. Photo-degradation and stabilization effects in operating organic photovoltaic devices by joint photo-current and morphological monitoring10.1016/j.solmat.2008.02.019 ↗
28. The critical role of processing and morphology in determining degradation rates in polymer solar cells10.1002/aenm.201000030 ↗