journal article·2009-02

Structural, morphological, optical and electrochromic properties of Ti-doped MoO3 thin films

S.S. Mahajan, S.H. Mujawar, P.S. Shinde, A.I. Inamdar, P.S. Patil

Publisher page

Abstract

Abstract Thin films of molybdenum trioxide (MoO 3 ) doped with titanium were prepared using a spray pyrolysis technique. Increasing Ti doping concentration was found to hamper the polycrystalline nature of undoped orthorhombic MoO 3 and undergo transformation from polycrystalline to amorphous structure with decrease in grain size. This was also reflected in scanning electron microscopy wherein transformation of thread-like reticulated morphology to spongy structures could be observed at higher Ti concentration (9 at% Ti). With increasing Ti concentration, the charge capacity, coloration efficiency, reversibility and electrochemical stability increased. This improvement could be ascribed to the amorphous spongy morphology of the doped samples that offers easy pathway for intercalation and deintercalation of the ions. Hence, 9 at% Ti-doped MoO 3 can act as an adequate host for electrochromic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Advanced Memory and Neural Computing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Coloration dynamics of spin-coated MoO3·nH2O electrochromic films fabricated from peroxo-polymolybdate solution10.1149/1.2054850 ↗
2. Granqvist · 1995
3. Gas sensing properties of PLD made MoO3 films10.1016/S0925-4005(03)00342-3 ↗
4. Electrochromic materials and devices for energy efficient windows10.1016/0165-1633(84)90024-8 ↗
5. Electrochromism in hydrated tungsten-oxide films10.1049/el:19750109 ↗
6. Pyrolytically spray-deposited tungsten trioxide films: dependence of electrochromic transmittance on crystallinity10.1088/0022-3727/21/12/023 ↗
7. Electrochromism in NiOx and WOx obtained by spray pyrolysis10.1016/0927-0248(94)00195-2 ↗
8. Preparation and characterization of pyrolytic spray deposited electrochromic tungsten trioxide films10.1016/S0040-6090(99)00682-3 ↗
9. Influence of substrate temperature on properties of sprayed WO3 thin films10.1016/S0254-0584(00)00382-5 ↗
10. Electrochromic effect in WO3 thin films prepared by spray pyrolysis10.1016/S0927-0248(02)00353-7 ↗
11. Preparation and characterization of spray deposited n-type WO3 thin films for electrochromic devices10.1016/j.materresbull.2004.04.023 ↗
12. Structural and electrochemical studies of WO3 films deposited by pulsed spray pyrolysis10.1016/j.solmat.2006.03.033 ↗
13. Electrochromic properties of nanocomposite WO3 films10.1016/j.solmat.2006.11.020 ↗
14. Electrochromic characteristics of fibrous reticulated WO3 thin films prepared by pulsed spray pyrolysis technique10.1016/j.solmat.2007.03.005 ↗
15. Studies on spray pyrolyzed molybdenum trioxide thin films10.1007/BF02745283 ↗
16. Concentration dependent structural, optical and electrochromic properties of MoO3 thin films10.1016/S1452-3981(23)15494-0 ↗
17. Structural, optical and electrochromic properties of Nb-doped MoO3 thin films10.1016/j.apsusc.2008.03.159 ↗
18. Electrochromic properties of spray deposited TiO2-doped WO3 thin films10.1016/j.apsusc.2004.12.042 ↗
19. Electrochromic properties of atmospheric CVD MoO3 and MoO3–WO3 films and their application in electrochromic devices10.1016/j.mseb.2004.12.084 ↗
20. Optical properties of chemical vapor deposited thin films of molybdenum and tungsten based metal oxides10.1016/S0927-0248(02)00267-2 ↗
21. Structure and optical properties of CVD molybdenum oxide films for electrochromic application10.1007/s10008-002-0274-7 ↗
22. Structural, optical and electrical characterization of spray-deposited TiO2 thin films10.1016/j.mseb.2006.03.016 ↗
23. Anomalous Optical Absorption Limit in InSb10.1103/PhysRev.93.632 ↗