journal article·2020-07

Fabrication and thermal properties investigation of aluminium based composite phase change material for medium and high temperature thermal energy storage

Qi Li, Lin Cong, Xusheng Zhang, Bo Dong, Boyang Zou, Zheng Du, Yaxuan Xiong, Chuan Li

Publisher page

Abstract

Abstract This paper concerns the development of a metal composite containing aluminium as phase change material (PCM) and alumina as structural supporting material (SSM) by the cold compression-hot sintering (CCHS) approach. The microstructural characteristics, thermal and mechanical properties and thermal performance of the proposed composite are characterized. For comparison, a salt composite made of NaLiCO3 as PCM and MgO as SSM with the same melting temperature as the proposed composite is also prepared and investigated. The results indicate that the alumina is wettable with liquid aluminium at elevated temperature, establishing confidence in fabrication of such aluminium composite through CCHS technique. The composite has good chemical compatibility with the melting temperature around 660 °C, and 45% alumina gives the composite optimal formulation at which a thermal conductivity of 3.75 W/m·K, a mechanical strength of 33 MPa and a thermal energy storage density of 400 kJ/kg over temperature range of 500–700 °C can be achieved. The results also indicate that the aluminium composite presents a higher thermal performance than the salt composite. At the same working conditions, the aluminium composite thermal conductivity is over twice as high as that the salt composite while maintaining a similar thermal energy storage density with salt composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A new scenario logic for the Paris Agreement long-term temperature goal10.1038/s41586-019-1541-4 ↗
2. The Paris Agreement zero-emissions goal is not always consistent with the 1.5 °C and 2 °C temperature targets
3. A review of performance investigation and enhancement of shell and tube thermal energy device containing molten salt based phase change materials for medium and high temperature applications10.1016/j.apenergy.2019.113806 ↗
4. Thermal energy storage: challenges and the role of particle technology10.1016/j.partic.2014.03.003 ↗
5. Thermal energy storage (TES) for industrial waste heat (IWH) recovery: a review10.1016/j.apenergy.2016.06.147 ↗
6. Experimental and numerical studies of a fatty acid based phase change dispersion for enhancing cooling of high voltage electrical devices10.1016/j.energy.2020.117280 ↗
7. High temperature latent heat thermal energy storage: phase change materials, design considerations and performance enhancement techniques10.1016/j.rser.2013.07.028 ↗
8. Considerations for the use of metal alloys as phase change materials for high temperature applications10.1016/j.solmat.2017.06.054 ↗
9. Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage10.1016/j.apenergy.2016.02.106 ↗
10. A new concept of Al-Si alloy with core-shell structure as phase change materials for thermal energy storage10.1016/j.matlet.2018.11.103 ↗
11. Al/Al2O3 core/shell microencapsulated phase change material for high-temperature applications10.1016/j.solmat.2018.12.023 ↗
12. Modifed Al@Al2O3 phase change materials by carbon via in-situ catalytic decomposition of methane10.1016/j.solmat.2019.109924 ↗
13. Aluminium and silicon base phase change materials for high capacity thermal energy storage10.1016/j.applthermaleng.2015.05.037 ↗
14. Thermal reliability of Al-Si eutectic alloy for thermal energy storage10.1016/j.materresbull.2017.07.040 ↗
15. Thermal analysis of Al-Si alloys as high-temperature phase-change material and their corrosion properties with ceramic materials10.1016/j.apenergy.2015.10.164 ↗
16. Review on shell and materials used in the encapsulation of phase change materials for high temperature thermal energy storage10.1016/j.rser.2015.03.038 ↗
17. Miscibility gap alloys with inverse microstructures and high thermal conductivity for high energy density thermal storage applications10.1016/j.applthermaleng.2012.11.029 ↗
18. A review of microencapsulated and composite phase change materials: alteration of strength and thermal properties of cement-based materials10.1016/j.rser.2019.04.072 ↗
19. Encapsulation of copper-based phase change materials for high temperature thermal energy storage10.1016/j.solmat.2014.05.012 ↗
20. Encapsulation of metal-based phase change materials using ceramic shells prepared by spouted based CVD method10.1016/j.solmat.2017.05.061 ↗
21. Facile synthesis of Al@Al2O3 microcapsule for high-temperature thermal energy storage10.1021/acssuschemeng.8b02840 ↗
22. Synthesis of Al-25 wt% Si@Al2O3@Cu microcapsules as phase change materials for high temperature thermal energy storage10.1016/j.solmat.2018.11.013 ↗
23. Microencapsulated phase change materials with high heat capacity and high cyclic durability for high-temperature thermal energy storage and transportation10.1016/j.apenergy.2016.11.025 ↗
24. Microencapsulation of eutectic and hyper-eutectic Al-Si alloy as phase change materials for high-temperature thermal energy storage10.1016/j.solmat.2018.08.001 ↗
25. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗
26. Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: a microstructural study10.1016/j.solmat.2019.03.035 ↗
27. Wetting of pure aluminium on graphite, SiC and Al2O3 in aluminium filtration10.1016/S1003-6326(11)61410-6 ↗
28. Wetting of polycrystalline SiC by molten Al and Al-Si alloys10.1016/j.apsusc.2014.08.055 ↗
29. Mgo based composite phase change materials for thermal energy storage: the effects of MgO particle density and size on microstructural characteristics as well as thermophysical and mechanical properties10.1016/j.apenergy.2019.04.094 ↗
30. Wettability of eutectic NaLiCO3 salt on magnesium oxide substrates at 778 K10.1016/j.apsusc.2018.02.082 ↗
31. Sodium sulfate-diatomite composite materials for high temperature thermal energy storage10.1016/j.powtec.2014.08.075 ↗
32. Development of content-stable phase change composites by infiltration into inorganic porous supports10.1016/j.solmat.2014.12.010 ↗
33. Impregnation of porous material with phase change material for thermal energy storage10.1016/j.matchemphys.2009.02.045 ↗
34. A novel low-temperature fabrication approach of composite phase change materials for high temperature thermal energy storage10.1016/j.apenergy.2018.12.072 ↗
35. Investigation of the effects of phase transformations in micro and nano aluminium powders on kinetics of oxidation using thermogravimetric analysis10.1039/C7CP02692G ↗
36. Thermal conductivity enhancement of recycled high density polyethylene as a storage media for latent heat thermal energy storage10.1016/j.solmat.2016.02.022 ↗
37. A form stable composite phase change material for thermal energy storage applications over 700 °C10.3390/app9050814 ↗