journal article·2020-06

Comparison of different types of interfacial oxides on hole-selective p+-poly-Si passivated contacts for high-efficiency c-Si solar cells

Xueqi Guo, Mingdun Liao, Zhe Rui, Qing Yang, Zhixue Wang, Chunhui Shou, Waner Ding, Xijia Luo, Yuhong Cao, Jiaping Xu, Liming Fu, Yuheng Zeng, Baojie Yan, Jichun Ye

Publisher page

Abstract

Abstract We present a systematic study of highly boron (B)-doped poly-silicon (p+-poly-Si) and ultrathin silicon oxide (SiOx) bi-layer structure, also named as p-TOPCon, as the hole-selective passivated contact on n-type c-Si wafer, where the SiOx layer is made with three methods of hot nitric acid oxidation SiOx (NAOS-SiOx), plasma-assisted nitrous-oxide (N2O) gas oxidation (PANO-SiOx), and thermal oxidation (Thermal-SiOx). We demonstrate that the SiOx has a strong influence on the passivation quality. The best result is achieved using the Thermal-SiOx, while the NAOS-SiOx is slightly inferior, but better than the PANO-SiOx. The p+-poly-Si/SiOx structures with the three SiOx layers achieve the optimized passivation quality at different annealing temperatures of 820 °C for the NAOS-SiOx, 880 °C for the PANO-SiOx, and 930 °C for the Thermal-SiOx. The other potential factors affecting the passivation quality are also studied. The most important observation is that the optimized p-TOPCon structures with the three SiOx layers have a similar B diffusion profile, which penetrates into the c-Si wafer about 50 nm with B concentration decreasing to ~1 × 1018 cm−3. However, the overall p+-poly-Si/SiOx is still much poorer than n+-poly-Si/SiOx in terms the passivation quality. The comparison of the τeff versus carrier injection intensity spectra suggests that the B–O complex is the passivation killer possibly, and the approaches to improve the p-TOPCon are searching the other elements to reduce the B–O defects. In addition, contact resistivity (ρc) measurements show that the Thermal-SiOx leads a higher ρc than the others, but its value is still low enough for high-efficiency solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. Recombination behavior of photolithography-free back junction back contact solar cells with carrier-selective polysilicon on oxide junctions for both polarities10.1016/j.egypro.2016.07.121 ↗
4. Material properties of LPCVD processed n-type polysilicon passivating contacts and its application in PERPoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
5. monoPoly™ cells: large-area crystalline silicon solar cells with fire-through screen printed contact to doped polysilicon surfaces10.1016/j.solmat.2018.05.059 ↗
6. Mass production of industrial tunnel oxide passivated contacts (i‐TOPCon) silicon solar cells with average efficiency over 23% and modules over 345 W10.1002/pip.3180 ↗
7. A 720 mV open circuit voltage SiOx:c‐Si:SiOx double heterostructure solar cell10.1063/1.96331 ↗
8. Polysilicon emitters for silicon concentrator solar cells10.1109/PVSC.1990.111625 ↗
9. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
10. Carrier transport through the ultrathin silicon-oxide layer in tunnel oxide passivated contact (TOPCon) c-Si solar cells10.1016/j.solmat.2018.07.025 ↗
11. Tunnel oxide passivated contacts as an alternative to partial rear contacts10.1016/j.solmat.2014.06.015 ↗
12. Efficient carrier-selective p- and n-contacts for Si solar cells10.1016/j.solmat.2014.05.039 ↗
13. Impact of surface morphology and interfacial oxide thickness on passivation quality of p+ polysilicon passivating contacts
14. P‐Type silicon solar cells with passivating rear contact formed by LPCVD p+ polysilicon and screen printed Ag metallization10.1002/pssr.201900064 ↗
15. Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films10.1016/j.solmat.2017.06.039 ↗
16. A passivating contact for silicon solar cells formed during a single firing thermal annealing10.1038/s41560-018-0239-4 ↗
17. Novel schemes of p+ polySi hydrogenation implemented in industrial 6'' bifacial front-and-rear passivating contacts solar cells
18. 23% efficient p-type crystalline silicon solar cells with hole-selective passivating contacts based on physical vapor deposition of doped silicon films10.1063/1.5037610 ↗
19. Conductivity and surface passivation properties of boron‐doped poly‐silicon passivated contacts for c‐Si solar cells10.1002/pssa.201800603 ↗
20. Ultra-thin atomic layer deposited aluminium oxide tunnel layer passivated hole-selective contacts for silicon solar cells10.1016/j.solmat.2018.11.011 ↗
21. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
22. Hydrogenation passivation of poly-Si/SiOx contacts for Si solar cells using Al2O3 studied with deuterium10.1063/1.5031118 ↗
23. Effect of silicon oxide thickness on polysilicon based passivated contacts for high-efficiency crystalline silicon solar cells10.1016/j.solmat.2018.05.011 ↗
24. Gallium-doped poly-Si:Ga/SiO2 passivated emitters to n-Cz wafers with iVoc > 730 mV10.1109/JPHOTOV.2017.2748422 ↗
25. Comparative study of differently grown tunnel oxide for p-type passivating contacts10.1016/j.egypro.2017.09.273 ↗
26. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
27. Studying dopant diffusion from Poly-Si passivating contacts10.1016/j.solmat.2019.109978 ↗
28. Ion implantation for poly-Si passivated back-junction back-contacted solar cells10.1109/JPHOTOV.2014.2382975 ↗
29. Implement of N+ and P+ POLO junction on front and rear side of double-side contact industral silicon solar cells
30. Degradation and regeneration of n+-doped poly-Si surface passivation on p-type and n-type Cz-Si under illumination and dark annealing10.1109/JPHOTOV.2020.2964987 ↗
31. Statistics of recombination of holes and electrons10.1103/PhysRev.87.835 ↗
32. Electron-hole recombination in germanium10.1103/PhysRev.87.387 ↗
33. Improvement of surface passivation of tunnel oxide passivated contact structure by thermal annealing in mixture of water vapor and nitrogen environment10.1002/solr.201900105 ↗
34. UV-Raman scattering of thin film Si with ultrathin silicon oxide tunnel contact for high efficiency crystal silicon solar cells10.1016/j.solmat.2018.12.025 ↗
35. Contact resistance and methods for its determination10.1016/0040-6090(83)90577-1 ↗
36. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
37. Measuring diode resistivity of passivated Contacts
38. An expanded Cox and Strack method for precise extraction of specific contact resistance of transition metal oxide/n-silicon heterojunction10.1109/JPHOTOV.2019.2917386 ↗
39. Nitric acid oxidation of Si to form ultrathin silicon dioxide layers with a low leakage current density10.1063/1.1621720 ↗
40. Ultrathin silicon oxide prepared by in-line plasma-assisted N2O oxidation (PANO) and the application for n-type polysilicon passivated contact10.1016/j.solmat.2019.110389 ↗
41. A strong-oxidizing mixed acid derived high-quality silicon oxide tunneling layer for polysilicon passivated contact silicon solar cell10.1016/j.solmat.2018.09.001 ↗
42. An industrially viable TOPCon structure with both ultra-thin SiOx and n+-poly-Si processed by PECVD for p-type c-Si solar cells10.1016/j.solmat.2019.109926 ↗
43. Fundamental boron-oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
44. Structure and transformation of the metastable boron- and oxygen-related defect center in crystalline silicon10.1103/PhysRevB.69.024107 ↗
45. On the passivation mechanism of poly-silicon and thin silicon oxide on crystal silicon wafers10.1016/j.solener.2019.10.064 ↗
46. Effective gettering of in-situ phosphorus-doped polysilicon passivating contact prepared using plasma-enhanced chemical-vapor deposition technique10.1016/j.solmat.2019.110256 ↗
47. Street · 1991
48. Donor states in hydrogenated amorphous silicon and germanium10.1103/PhysRevLett.54.1836 ↗
49. Simple cleaning and conditioning of silicon surfaces with UV/ozone Sources☆10.1016/j.egypro.2014.08.067 ↗
50. Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers10.1016/j.solmat.2015.06.048 ↗
51. Tunnel oxide passivating electron contacts as full-area rear emitter of high-efficiency p-type silicon solar cells10.1002/pip.2960 ↗
52. Numerical exploration for high-efficiency structure design and free-energy loss analysis of polysilicon passivated contact p-type silicon solar cell10.1016/j.solener.2018.12.044 ↗