journal article·2019-11

Advanced performance testing of anti-soiling coatings – Part I: Sequential laboratory test methodology covering the physics of natural soiling processes

Klemens Ilse, Muhammad Zahid Khan, Nicoleta Voicu, Volker Naumann, Christian Hagendorf, Jörg Bagdahn

Publisher page

Abstract

Abstract The accumulation of dust and dirt on PV modules can cause significant energy yield losses, especially in dusty environments. The application of anti-soiling coatings (ASC) is seen as a promising mitigation approach to reduce cleaning frequency and thus cleaning costs. In order to examine the effectiveness of coatings, outdoor tests are usually necessary, but these are subject to varying and complex weather conditions. Therefore, an advanced laboratory soiling test setup and corresponding sequential testing procedures representing the underlying physics of soiling and self-cleaning processes were developed, aiming at fast, reliable and standardized evaluation of the anti-soiling performance of glass coatings. The methods include the control of important environmental parameters during dust deposition and a controlled dust removal by utilization of wind blow or centrifugal forces. Besides method evaluation experiments, comparative soiling experiments were performed for uncoated solar-grade float glass, an anti-reflective coating (ARC) and an ASC. The dusts used for the tests were collected from PV modules located in Dunhuang (cold desert climate, China) and Doha (hot desert climate, Qatar). For sample characterization and soiling loss determination, optical transmittance and light microscopy measurements were performed. Both wind blow and rotational force test (RFT) procedures reveal a reduced dust accumulation for the ARC and a further increased anti-soiling behavior for the ASC. The presented test results are consistent with other outdoor and laboratory soiling studies. Compared to wind blow testing, the rotational force test setup significantly improves the controllability of test parameters and provides a better selectivity of coating performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Photovoltaic Systems and Sustainability · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. International Renewable Energy Agency · 2018
2. Fundamentals of soiling processes on photovoltaic modules10.1016/j.rser.2018.09.015 ↗
3. Energy yield loss caused by dust deposition on photovoltaic panels10.1016/j.solener.2014.05.030 ↗
4. Attia · 2017
5. Dust and soiling issues and impacts relating to solar energy systems: literature review update for 2012–201510.1016/j.rser.2016.04.059 ↗
6. Solar energy dust and soiling R&D progress: literature review update for 201610.1016/j.rser.2017.09.015 ↗
7. Performance degradation of photovoltaic power system: review on mitigation methods10.1016/j.rser.2016.09.072 ↗
8. The effect of environmental factors and dust accumulation on photovoltaic modules and dust-accumulation mitigation strategies10.1016/j.rser.2017.09.042 ↗
9. A brief history and future aspects in automatic cleaning systems for solar photovoltaic panels10.1080/01691864.2014.996602 ↗
10. Mayhoub · 2016
11. A comprehensive review of the impact of dust on the use of solar energy: history, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
12. Review of PV soiling particle mechanics in desert environments10.1016/j.rser.2017.03.100 ↗
13. Artificial soiling of photovoltaic module surfaces using traceable soil components
14. From the impact of harsh climates and environmental conditions on pv-modules - development of a soiling and abrasion test
15. Study of soiling loss on photovoltaic modules with artificially deposited dust of different gravimetric densities and compositions collected from different locations in India
16. Soiling of building envelope surfaces and its effect on solar reflectance – Part II: development of an accelerated aging method for roofing materials10.1016/j.solmat.2013.11.028 ↗
17. Retrofitting of solar glasses by protective anti-soiling and -graffiti coatings10.1016/j.renene.2013.12.027 ↗
18. Wind tunnel protocol to study the effects of anti-soiling and anti-reflective coatings on deposition, removal, and accumulation of dust on photovoltaic surfaces and consequences for optical transmittance10.1016/j.solener.2018.01.088 ↗
19. Microscopic measurement and analysis of the soiling behavior of surfaces with standardized and real dust – a parameter study10.1016/j.egypro.2016.06.239 ↗
20. Comparing indoor and outdoor soiling experiments for different glass coatings and microstructural analysis of particle caking processes10.1109/JPHOTOV.2017.2775439 ↗
21. Understanding the effects of sand and dust accumulation on photovoltaic modules10.1016/j.renene.2012.06.007 ↗
22. Brophy · 2015
23. New chemical functionalization concept for anti-reflective and anti-soiling front glass of PV modules based on surface structuring and modification
24. Experimental investigation of the impact of airborne dust deposition on the performance of solar photovoltaic (PV) modules10.1016/j.atmosenv.2011.04.084 ↗
25. A study of dust accumulating process on solar photovoltaic modules with different surface temperatures10.1016/j.egypro.2015.07.378 ↗
26. Field and lab verification of hydrophobic anti-reflective and anti-soiling coatings on photovoltaic glass
27. Anti-soiling effect of porous SiO2 coatings prepared by sol–gel processing10.1007/s10971-011-2489-5 ↗
28. Anti-soiling surfaces for PV applications prepared by sol-gel processing: comparison of laboratory testing and outdoor exposure10.1016/j.solmat.2016.07.004 ↗
29. Anti-reflective and anti-soiling properties of KleanBoost TM, a superhydrophobic nano-textured coating for solar glass
30. Experimental investigation of the anti-dust effect of transparent hydrophobic coatings applied for solar cell covering glass10.1016/j.solmat.2016.10.043 ↗
31. Electrodynamic dust shield performance under simulated operating conditions for solar energy applications10.1016/j.solmat.2018.05.021 ↗
32. Preparation of anti-reflection glass surface with self-cleaning and anti-dust by ammonium hydroxide hydrothermal method10.1166/mex.2015.1248 ↗
33. Effect of soiling on photovoltaic modules10.1016/j.solener.2013.07.017 ↗
34. Performance analysis of electrodynamic screens based on residual particle size distribution
35. Cabrera · 2016
36. Dust-induced shading on photovoltaic modules10.1002/pip.2230 ↗
37. Efficiency of electrodynamic dust shield at dust loading levels relevant to solar energy applications10.1109/JPHOTOV.2017.2764890 ↗
38. Soiling test methods and their use in predicting performance of photovoltaic modules in soiling environments
39. Microstructural analysis of the cementation process during soiling on glass surfaces in arid and semi-arid climates10.1002/pssr.201600152 ↗
40. Dew as a detrimental influencing factor for soiling of PV modules10.1109/JPHOTOV.2018.2882649 ↗
41. Comprehensive analysis of soiling and cementation processes on PV modules in Qatar10.1016/j.solmat.2018.06.051 ↗
42. An anti-reflective and anti-soiling coating for photovoltaic panels
43. Self-cleaning of surfaces: the role of surface wettability and dust types10.1038/srep38239 ↗
44. Mechanics of dust removal from rotating disk in relation to self-cleaning applications of PV protective cover10.1016/j.solener.2016.02.028 ↗
45. Dross · 2018
46. Schoot · 2016
47. Tummers · 2017
48. Buskens · 2009
49. DSM Advanced Surfaces, KhepriCoat® - the Best-Performing Anti-reflective Coating for Solar Glass: KhepriCoat Product Brochure. https://de.slideshare.net/webster307/khepricoat-productbrochure.
50. Adhesion mechanisms on solar glass: effects of relative humidity, surface roughness, and particle shape and size10.1016/j.solmat.2017.07.026 ↗
51. Statistical analysis of the metrological properties of float glass
52. Advanced performance testing of anti-soiling coatings part II: particle-size dependent analysis and determination of adhesion forces10.1016/j.solmat.2019.110049 ↗
53. Mineralogical characteristics of soil dust from source regions in northern China10.1016/j.partic.2009.10.001 ↗
54. Progress in particle resuspension from rough surfaces by turbulent flows10.1016/j.pecs.2014.06.001 ↗
55. Investigation of factors affecting condensation on soiled PV modules10.1016/j.solener.2017.10.089 ↗
56. K.K. Ilse, M.Z. Khan, K. Lange, H.N. Gurumoorthy, V. Naumann, C. Hagendorf, J. Bagdahn, Rotational force test method for determination of particle adhesion –from a simplified model to realistic dusts, (2019) in preparation.10.1063/5.0015122 ↗
57. Particle-size dependent adhesion forces and wind removal efficiency of anti-soiling coatings on textured solar glasses10.1557/mrc.2019.105 ↗