journal article·2019-10Open access

Amorphous and partially-amorphous metal coatings for corrosion resistance in molten chloride salt

Stephen S. Raiman, Richard T. Mayes, J. Matt Kurley, Riley Parrish, Evelina Vogli

Abstract

Abstract Amorphous metal coatings were developed to improve the corrosion resistance of structural alloys in molten salts for use as salt-facing materials in concentrating solar power (CSP) and molten salt reactor (MSR) applications. Three coatings were tested. One Fe-based, fully amorphous coating, and two Ni-based partially amorphous coatings. The candidate coatings were applied to samples made from Ni-based alloy 230, and exposed to KCl–MgCl2 at 750 °C for 300 h in sealed Mo capsules. After exposure, uncoated alloy 230 samples were depleted in chromium near the surface, as measured by SEM-EDS. The attack had an average depth of 33 μm. All three coatings performed well, showing no observable degradation during exposure, despite chromium contents between 20% and 40%. XRD and TEM measurements showed the coatings were fully crystallized after exposure, so the excellent corrosion resistance can likely be attributed to the recrystallized microstructure of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Phase Change Materials Research · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Mehos · 2017
2. Williams · 2006
3. Williams · 2006
4. Manly · 1957
5. DeVan · 1962 · 1
6. Keiser · 1977
7. Materials corrosion in molten LiF–NaF–KF salt10.1016/j.jfluchem.2008.05.008 ↗
8. Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications10.1016/j.pmatsci.2018.05.003 ↗
9. Aggregation and data analysis of corrosion studies in molten chloride and fluoride salts10.1016/j.jnucmat.2018.07.036 ↗
10. Corrosion behavior of nickel-based superalloys in thermal storage medium of molten eutectic NaCl-MgCl 2 in atmosphere10.1016/j.solmat.2017.02.020 ↗
11. Corrosion behavior of metallic alloys in molten chloride salts for thermal energy storage in concentrated solar power plants: A review10.1007/s11705-018-1720-0 ↗
12. Corrosion performance of ferrous and refractory metals in molten salts under reducing conditions10.1557/JMR.1999.0268 ↗
13. Susskind · 1960
14. Corrosion behaviour of various model alloys with NaCl–KCl coating10.1016/j.matchemphys.2005.03.015 ↗
15. Ambrosek · 2011
16. Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems10.1016/j.apenergy.2015.08.131 ↗
17. Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies10.1016/j.solmat.2016.05.052 ↗
18. Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl 2/KCl/NaCl under Inert atmosphere10.1016/j.solmat.2018.04.025 ↗
19. Corrosion behavior of Ni-based alloys in molten NaCl-CaCl 2 -MgCl 2 eutectic salt for concentrating solar power10.1016/j.solmat.2017.05.050 ↗
20. The evolution of thermal barrier coatings in gas turbine engine applications10.1115/1.2906801 ↗
21. Thermal barrier coatings for gas-turbine engine applications. (Review: materials science)10.1126/science.1068609 ↗
22. Protective coatings in the gas turbine engine
23. Corrosion resistance of MCrAlX coatings in a molten chloride for thermal storage in concentrating solar power applications10.1038/s41529-017-0012-3 ↗
24. Castable cements to prevent corrosion of metals in molten salts10.1016/j.solmat.2016.04.009 ↗
25. Carburization effects on the corrosion of Cr, Fe, Ni, W, and Mo in fluoride-salt cooled high temperature reactor (FHR) coolant10.1016/j.anucene.2018.05.013 ↗
26. Molten chloride salts for next generation concentrated solar power plants: mitigation strategies against corrosion of structural materials10.1016/j.solmat.2018.12.020 ↗
27. Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: pre-oxidation treatment and isothermal corrosion tests10.1016/j.solmat.2017.02.019 ↗
28. Beating crystallization in glass-forming metals by millisecond heating and processing10.1126/science.1201362 ↗
29. A damage-tolerant glass10.1038/nmat2930 ↗
30. Farmer · 2011
31. Passivation behavior of Fe-based amorphous coatings prepared by high-velocity air/oxygen fuel processes10.1007/s11666-017-0647-1 ↗
32. Hofmann · 2014
33. The kinetics of crystallisation of an Fe-P-C glass10.1016/0025-5416(77)90118-5 ↗
34. High-temperature oxidation and corrosion of structural materials in molten chlorides10.1023/A:1010333407304 ↗
35. The effect of aqueous contaminants on the rexox potential of chloride melts10.1016/0013-4686(61)80011-X ↗
36. Impact of corrosion test container material in molten fluorides10.1115/1.4031682 ↗