journal article·2015-06

A nonionic surfactant simultaneously enhancing wetting property and electrical conductivity of PEDOT:PSS for vacuum-free organic solar cells

Zaifang Li, Wei Meng, Jinhui Tong, Chen Zhao, Fei Qin, Fangyuan Jiang, Sixing Xiong, Sheng Zeng, Ling Xu, Bin Hu, Yinhua Zhou

Publisher page

Abstract

Abstract In this work, we report a nonionic surfactant (polyethylene glycol 2,5,8,11-tetramethyl-6-dodecyne-5,8-diol ether, PEG-TmDD) that can improve the wetting property of PEDOT:PSS aqueous solution on the organic photoactive layer and simultaneously enhance the electrical conductivity of PEDOT:PSS film up to 526 S/cm. Furthermore, the conductivity enhancement is significantly dependent on the thermal annealing, which is contrary to the conductivity behavior of PEDOT:PSS film prepared from the formulation added with ethylene glycol (EG) where the conductivity is almost independent of the thermal annealing. The temperature dependence of the conductivity of PEDOT:PSS by PEG-TmDD is possibly ascribed to decomposition of PEG-TmDD into EG and TmDD during thermal annealing. With the high conductivity and good wetting on the active layer, PEDOT:PSS mixed with PEG-TmDD is used as the top electrode for organic solar cells. The cells exhibit a fill factor of 60% and a power conversion efficiency of 4.1% using poly(3-hexylthiophene):indene-C60 bis-adduct as the active layer. The results indicate that the new formulation of PEDOT:PSS mixed with PEG-TmDD is suitable for preparing a top electrode for vacuum-free organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Scientific importance, properties and growing applications of poly( 3,4-ethylenedioxythiophene)10.1039/b417803n ↗
2. All printed transparent electrodes through an electrical switching mechanism: a convincing alternative to indium-tin-oxide, silver and vacuum10.1039/c2ee23244h ↗
3. Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules10.1016/j.orgel.2012.12.033 ↗
4. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
5. Organic photovoltaics avoiding indium10.1038/nphoton.2011.46 ↗
6. “Secondary doping” methods to significantly enhance the conductivity of PEDOT:PSS for its application as transparent electrode of optoelectronic devices10.1016/j.displa.2013.08.007 ↗
7. Polymer- and carbon-based electrodes for polymer solar cells: toward low-cost, continuous fabrication over large area10.1016/j.solmat.2011.12.022 ↗
8. Quasi-one dmensional in-plane conductivity in filamentary films of PEDOT:PSS10.1002/adfm.201301174 ↗
9. All solution processing of ITO-free organic solar cell modules directly on barrier foil10.1016/j.solmat.2012.07.004 ↗
10. Optimization of inkjet printed PEDOT:PSS thin films through annealing processes10.1016/j.orgel.2012.05.005 ↗
11. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
12. Inverted and transparent polymer solar cells prepared with vacuum-free processing10.1016/j.solmat.2008.11.002 ↗
13. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
14. Facile synthesis of Cu2CoSnS4 nanoparticles exhibiting red-edge-effect: application in hybrid photonic devices10.1063/1.4825070 ↗
15. Enhancement of electrical conductivity of poly(3,4-ethylenedioxythiophene)/poly(4-styrenesulfonate) by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
16. Indium tin oxide-free and metal-free semitransparent organic solar cells10.1063/1.3499299 ↗
17. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
18. Indium tin oxide-free semi-transparent inverted polymer solar cells using conducting polymer as both bottom and top electrodes10.1016/j.orgel.2009.06.019 ↗
19. Cathodes comprising highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) for semi-transparent polymer solar cells10.1016/j.orgel.2009.12.009 ↗
20. Evolution of nanomorphology and anisotropic conductivity in solvent-modified PEDOT:PSS films for polymeric anodes of polymer solar cells10.1039/b915756e ↗
21. All-plastic solar cells with a high photovoltaic dynamic range10.1039/c3ta15073a ↗
22. Effect of molecular weight of additives on the conductivity of PEDOT:PSS and efficiency for ITO-free organic solar cells10.1039/c3ta11726j ↗
23. Highly conductive PEDOT:PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
24. High-conductivity poly (3,4-ethylenedioxythiophene): poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
25. Morphological change and mobility enhancement in PEDOT:PSS by adding co-solvents10.1002/adma.201205158 ↗
26. Polymer photovoltaic cells with conducting polymer anodes10.1002/1521-4095(20020503)14:9<662::AID-ADMA662>3.0.CO;2-N ↗
27. Optical anisotropy in thin films of poly(3,4-ethylenedioxythiophene)-poly(4-styrenesulfonate)10.1016/S1566-1199(02)00051-4 ↗
28. Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
29. Highly conductive poly(3,4-ethylenedioxythiophene):poly (styrenesulfonate) films using 1-ethyl-3-methylimidazolium tetracyanoborate ionic liquid10.1002/adfm.201200225 ↗
30. Influence of ionic liquids on the electrical conductivity and morphology of PEDOT: PSS films10.1021/cm070398z ↗
31. Salt-induced charge screening and significant conductivity enhancement of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)10.1021/ma900327d ↗
32. Anion effect on salt-induced conductivity enhancement of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films10.1016/j.orgel.2010.04.007 ↗
33. The enhancement of electrical and optical properties of PEDOT:PSS using one-step dynamic etching for flexible application10.1016/j.orgel.2014.04.014 ↗
34. Comparison of dimethyl sulfoxide treated highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) electrodes for use in indium tin oxide-free organic electronic photovoltaic devices10.1016/j.orgel.2014.07.015 ↗
35. Successive solvent-treated PEDOT:PSS electrodes for flexible ITO-free organic photovoltaics10.1016/j.solmat.2013.02.031 ↗
36. Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells10.1039/c2ee22595f ↗
37. High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes10.1039/c3ee41077c ↗
38. Highly conductive poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) films treated with an amphiphilic fluoro compound as the transparent electrode of polymer solar cells10.1039/C1EE02475B ↗
39. Solution-processed metallic conducting polymer films as transparent electrode of optoelectronic devices10.1002/adma.201104795 ↗
40. Transparent electrodes: highly conductive PEDOT:PSS nanofibrils induced by solution-processed crystallization (Adv. Mater. 14/2014)10.1002/adma.201470088 ↗
41. Solution-processed PEDOT:PSS films with conductivities as indium tin oxide through a treatment with mild and weak organic acids10.1021/am404113n ↗
42. Highly conductive PEDOT:PSS treated with formic acid for ITO-free polymer solar cells10.1021/am405024d ↗
43. Optimization of a polymer top electrode for inverted semitransparent organic solar cells10.1016/j.orgel.2011.02.017 ↗
44. 〈http://clevios.com/media/webmedia_local/media/datenblaetter/Clevios_P_coating_guide_08-03-18jb2.pdf〉, (accessed Aug 2014)
45. Significant conductivity enhancement of conductive poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) films by adding anionic surfactants into polymer solution10.1021/ma8012459 ↗
46. Effect of PEDOT nanofibril networks on the conductivity, flexibility, and coatability of PEDOT:PSS films10.1021/am500769k ↗
47. Chemical cross-linking of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) using poly(ethylene oxide) (PEO)10.1016/j.polymer.2013.09.046 ↗
48. Chemical cross-linking of highly sulfonated polystyrene electrospun fibers10.1021/ma202385g ↗
49. PEDOT:PSS top electrode prepared by transfer lamination using plastic wrap as the transfer medium for organic solar cells10.1016/j.orgel.2014.07.028 ↗