journal article·2011-03

Formation of heavily boron-doped hydrogenated polycrystalline germanium thin films by co-sputtering for developing p+ emitters of bottom cells

Chao-Yang Tsao, Jialiang Huang, Xiaojing Hao, Patrick Campbell, Martin A. Green

Publisher page

Abstract

Abstract Properties of heavily boron-doped hydrogenated polycrystalline germanium (Ge) films sputter-deposited on glass are investigated for developing p+ emitters of the bottom cells of low cost monolithic tandem solar cells. The films were deposited and in-situ doped by co-sputtering Ge with boron at various power levels (PB) in a mixture of argon and hydrogen at 500 °C, and then followed by a rapid thermal anneal process at 550 °C for 120 s or 600 °C for 60 s, respectively. The dependence of the structural properties of the films on the various boron incorporations as well as annealing conditions was explored by Raman and X-ray diffraction measurements. We find that the films as deposited at 500 °C are polycrystalline with strong (2 2 0) preferential orientation, which are normally of columnar structure, confirmed by cross-sectional transmission electron microscopy. Revealed by Hall measurements, a boron activation level of 6.24×1019 atoms/cm3, well above reported maximum solid solubility in crystalline Ge, was obtained in the as deposited film at PB=55 W. Annealing at 600 °C enhanced the concentration to 1.21×1020 atoms/cm3. A fact that boron hardly diffuses in Ge at temperatures below 800 °C makes the resultant material an excellent candidate for thin p+ emitters of the bottom cells of monolithic tandem solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Low-temperature growth of polycrystalline Ge thin film on glass by in-situ deposition and ex-situ solid-phase crystallization for photovoltaic applications10.1016/j.apsusc.2009.03.035 ↗
2. In-situ low temperature growth of poly-crystalline germanium thin film on glass by RF magnetron sputtering10.1016/j.solmat.2010.02.035 ↗
3. Influence of hydrogen on structural and optical properties of low temperature polycrystalline Ge films deposited by RF magnetron sputtering10.1016/j.jcrysgro.2010.06.008 ↗
4. C.-Y. Tsao, J. Wong, J. Huang, P. Campbell, D. Song, M.A. Green, Structural dependence of electrical properties of Ge films prepared by RF magnetron sputtering, Appl. Phys. A, in press, doi:10.1007/s00339-010-5957-9.10.1007/s00339-010-5957-9 ↗
5. Diffusion of boron in germanium at 800–900°C10.1063/1.1766090 ↗
6. Diffusion, activation, and recrystallization of boron implanted in preamorphized and crystalline germanium10.1063/1.2117631 ↗
7. Diffusion of ion-implanted boron in germanium10.1063/1.1402664 ↗
8. Activation level in boron-doped thin germanium-on-insulator (GeOI): extraction method and impact of mobility10.1016/j.mssp.2008.11.008 ↗
9. Rectifying characteristics of sputter-deposited SiGe diodes10.1116/1.1580842 ↗
10. Very shallow boron junctions in Si by implantation and SOD diffusion obtained by RTP10.1016/j.mejo.2007.07.058 ↗
11. Germanium substrate loss during low temperature annealing and its influence on -ion-implanted phosphorous dose loss10.1063/1.2981522 ↗
12. Effect of germanium substrate loss and nitrogen on dopant diffusion in germanium10.1063/1.3086664 ↗
13. Ion implantation of boron in germanium10.1063/1.337918 ↗
14. Activation and diffusion studies of ion-implanted p and n dopants in germanium10.1063/1.1618382 ↗
15. Preamorphization implantation-assisted boron activation bulk germanium and germanium-on-insulator10.1063/1.2076440 ↗
16. Shallow boron implantations in Ge and the role of the pre-amorphization depth10.1016/j.mssp.2008.09.006 ↗
17. Low temperature doping of poly-SiGe films with boron by co-sputtering10.1016/S0040-6090(00)00922-6 ↗
18. Solid phase crystallized polycrystalline thin-films on glass from evaporated silicon for photovoltaic applications10.1016/j.tsf.2006.01.010 ↗
19. Progress with polycrystalline silicon thin-film solar cells on glass at UNSW10.1016/j.jcrysgro.2005.11.050 ↗
20. Large open-circuit voltage improvement by rapid thermal annealing of evaporated solid-phase-crystallized thin-film silicon solar cells on glass10.1063/1.1921352 ↗
21. Resistivity changes of heavily-boron-doped CVD-prepared polycrystalline silicon caused by thermal annealing10.1016/0038-1101(81)90211-2 ↗
22. The microstructure of sputter-deposited coatings10.1116/1.573628 ↗
23. Influence of oxygen incorporation on the properties of magnetron sputtered hydrogenated amorphous germanium films10.1063/1.109504 ↗
24. Effect of boron doping on the structural properties of polycrystalline silicon films grown at reduced pressures10.1063/1.357735 ↗
25. The effect of low pressure on the structure of LPCVD polycrystalline silicon films10.1149/1.2100239 ↗
26. Microstructural dependence of electron and hole transport in low-temperature-grown polycrystalline-silicon thin-film solar cells10.1063/1.1527979 ↗
27. Structural, electrical, and optical properties of amorphous germanium films10.1103/PhysRevB.1.2545 ↗
28. Ion-implantation issues in the formation of shallow junctions in germanium10.1016/j.mssp.2006.08.067 ↗
29. Sze · 2007
30. The boron-germanium system10.1016/0022-5088(70)90032-9 ↗
31. Equilibrium segregation coefficient and solid solubility of B in Czochralski Ge crystal growth10.1016/j.tsf.2009.09.132 ↗