journal article·2019-07Open access

Carbonate salt based composite phase change materials for medium and high temperature thermal energy storage: A microstructural study

Chuan Li, Qi Li, Lin Cong, Yongliang Li, Xianglei Liu, Yimin Xuan, Yulong Ding

Abstract

Abstract We investigated the microstructures and their formation mechanisms of carbonate salt based composite phase change materials (CPCMs). Such materials typically consist of a carbonate salt as the phase change material (PCM), a thermal conductivity enhancement material (TCEM) and a ceramic skeleton material (CSM) for structure stabilisation, and are mainly for medium and high temperature thermal energy storage applications. Two carbonate salt based composites were studied with one being eutectic NaLiCO3 and the other Na2CO3. MgO and graphite flakes were used respectively as the CSM and TCEM for fabricating the composite modules. A scanning electron microscope with energy dispersive spectrometer (SEM-EDS) was used to observe the microstructures and the salt distribution and redistribution within the composite structures during repeated melting-solidification cycles. The results showed salt migration within the composite structure during the thermal cycling. Such a microscopic motion led to a more homogenous distribution of not only the salt but also the CSM and TCEM. At a low graphite flake loading, breakage of the graphite flake was observed, suggesting stress generation during thermal cycling. The extent of the breakage reduced with increasing graphite flake loading, suggesting the stress generation be related to microscopic motion. The MgO based CSM particles were likely to be sintered, forming a porous structure. Such a structure reduced the swelling effect partially due to the use of graphite on which the salts had a poor wettability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Heremans, Thermoelectricity: the ugly duckling10.1038/508327a ↗
2. Engineering. Searching for a better thermal battery10.1126/science.1218761 ↗
3. Thermal energy storage: challenges and the role of particle technology10.1016/j.partic.2014.03.003 ↗
4. A review on phase change energy storage: materials and applications10.1016/j.enconman.2003.09.015 ↗
5. Heat transfer performance of thermal energy storage components containing composite phase change materials10.1049/iet-rpg.2016.0026 ↗
6. Thermal performance of copper foam/paraffin composite phase change material10.1016/j.enconman.2017.12.023 ↗
7. A review on thermophysical properties of nanoparticle dispersed phase change materials10.1016/j.enconman.2015.02.028 ↗
8. A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility10.1016/j.enconman.2016.02.045 ↗
9. Thermal energy storage: “How previous findings determine current research priorities”10.1016/j.energy.2012.01.024 ↗
10. Preparation and performance of form-stable polyethylene glycol/silicon dioxide composites as solid–liquid phase change materials10.1016/j.apenergy.2007.12.003 ↗
11. Thermal conductivity enhancement of PEG/SiO2 composite PCM by in situ Cu doping10.1016/j.solmat.2012.06.012 ↗
12. Preparation and characterization of PEG/SiO2 composites as shape-stabilized phase change materials for thermal energy storage10.1016/j.solmat.2013.07.017 ↗
13. Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using b-Aluminum nitride10.1016/j.apenergy.2008.10.020 ↗
14. High temperature carbonate/MgO composite materials as thermal storage media for double-walled solar reformer tubes10.1016/j.solener.2008.05.011 ↗
15. High temperature latent heat thermal energy storage: phase change materials, design considerations and performance enhancement techniques10.1016/j.rser.2013.07.028 ↗
16. Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: a review10.1016/j.rser.2013.03.031 ↗
17. Developments in organic solid-liquid phase change materials and their applications in thermal energy storage10.1016/j.enconman.2015.01.084 ↗
18. Ni/ceramic/molten-salt composite catalyst with high temperature thermal storage for use in solar reforming processes10.1016/S0360-5442(03)00194-4 ↗
19. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
20. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
21. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
22. Carbonate-salt-based composite materials for medium and high temperature thermal energy storage10.1016/j.partic.2013.09.002 ↗
23. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗
24. Effect of sintering conditions on mechanical and physical properties of MgO ceramic reinforced with chopped Si-C-O fibre10.1016/S0167-577X(99)00260-8 ↗
25. Sintering of ceramics
26. Thermal stability of MgO nanoparticles10.1016/j.matlet.2007.02.032 ↗
27. Sintering characteristics and grain growth behaviour of MgO nanopowders by spark plasma sintering10.1016/j.jallcom.2014.04.148 ↗
28. Effect of starting particle size on hot-pressing of magnesium oxide powder prepared by vapour-phase oxidation process10.1023/A:1018649222749 ↗
29. Wettability of eutectic NaLiCO3 salt on magnesium oxide substrates at 778K10.1016/j.apsusc.2018.02.082 ↗
30. Wettability of pure Ti by molten pure Mg droplets10.1016/j.actamat.2009.09.039 ↗