journal article·2018-01Open access

Electrical characterization and comparison of CIGS solar cells made with different structures and fabrication techniques

Rebekah L. Garris, Steve Johnston, Jian V. Li, Harvey L. Guthrey, Kannan Ramanathan, Lorelle M. Mansfield

Abstract

Abstract In a previous paper [1], we reported on Cu(In,Ga)Se2-based (CIGS) solar cell samples collected from different research laboratories and industrial companies with the purpose of understanding the range of CIGS materials that can lead to high-quality and high-efficiency solar panels. Here, we report on electrical measurements of those same samples. Electron-beam induced current and time-resolved photoluminescence (TRPL) gave insights about the collection probability and the lifetime of carriers generated in each absorber. Capacitance and drive-level capacitance profiling revealed nonuniformity in carrier-density profiles. Admittance spectroscopy revealed small activation energies (≤ 0.03 eV) indicative of the inversion strength, larger activation energies (> 0.1 eV) reflective of thermal activation of absorber conductivity and a deeper defect level. Deep-level transient spectroscopy (DLTS) probed deep hole-trapping defects and showed that all samples in this study had a majority-carrier defect with activation energy between 0.3 eV and 0.9 eV. Optical-DLTS revealed deep electron-trapping defects in several of the CIGS samples. This work focused on revealing similarities and differences between high-quality CIGS solar cells made with various structures and fabrication techniques.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Comparison of CIGS solar cells made with different structures and fabrication techniques10.1109/JPHOTOV.2016.2616188 ↗
2. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
3. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
4. Minority-carrier lifetime in III–V semiconductors10.1016/S0080-8784(08)62594-6 ↗
5. R.K. Ahrenkiel, B.M. Keyes, L. Wang, S.P. Albright, Minority-carrier lifetime of polycrystalline CdTe in CdS/CdTe solar cells, in: The Conference Record Proceedings of the 22nd IEEE Photovoltaic Specialists Conference, 1991, pp. 940–945.10.1109/PVSC.1991.169347 ↗
6. Time-resolved photoluminescence studies of CdTe solar cells10.1063/1.1597974 ↗
7. W.K. Metzger, M.J. Romero, P. Dippo, M. Young, Characterizing recombination in CdTe solar cells with time-resolved photoluminescence, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, 2006, pp. 372–375.10.1109/WCPEC.2006.279467 ↗
8. Spectrally and time resolved photoluminescence analysis of the CdS/CdTe interface in thin-film photovoltaic solar cells10.1063/1.4803911 ↗
9. Probing carrier lifetimes in photovoltaic materials using subsurface two-photon microscopy10.1038/srep02098 ↗
10. Minority carrier lifetime analysis in the bulk of thin-film absorbers using subbandgap (two-photon) excitation10.1109/JPHOTOV.2013.2270354 ↗
11. Simultaneous measurement of minority-carrier lifetime in single-crystal CdTe using three transient decay techniques10.1109/JPHOTOV.2014.2339491 ↗
12. Shallow defects in wide gap chalcopyrite CuGaSe2
13. Comparative study of the luminescence and intrinsic point defects in the kesterite Cu2ZnSnS4 and chalcopyrite Cu(In,Ga)Se2 thin films used in photovoltaic applications10.1103/PhysRevB.84.165324 ↗
14. Sze · 1982
15. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
16. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
17. Understanding defect-related issues limiting efficiency of CIGS solar cells10.1016/j.solmat.2009.01.022 ↗
18. Interpretation of admittance, capacitance-voltage, and current-voltage signatures in Cu(In,Ga)Se-2 thin film solar cells10.1063/1.3277043 ↗
19. Charge and doping distributions by capacitance profiling in Cu(In, Ga)Se(2) solar cells10.1063/1.2884708 ↗
20. Distinction between bulk and interface states in CulnSe2/CdS/ZnO by space charge spectroscopy10.1063/1.366686 ↗
21. M. Gloeckler, A.L. Fahrenbruch, J.R. Sites, Numerical modeling of CIGS and CdTe cells: setting the baseline, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, Osaka, Japan, 2003, pp. 491–494.
22. Deep-level transient spectroscopy: a new method to characterize traps in semiconductors10.1063/1.1663719 ↗
23. Deep level transient fourier spectroscopy (DLTFS)-A technique for the analysis of deep level properties10.1016/0038-1101(88)90071-8 ↗
24. Effect of Ga content on defect states in CuIn1−xGaxSe2 photovoltaic devices10.1063/1.1485301 ↗
25. Light- and bias-induced metastabilities in Cu(In,Ga)Se2 based solar cells caused by the (VSe-VCu) vacancy complex10.1063/1.2388256 ↗
26. Transient capacitance spectroscopy of defect levels in CIGS devices10.1016/S0040-6090(99)00822-6 ↗
27. Relation between the energy constant and the quantity constant in the conductivity-temperature formula of oxide semiconductors
28. Volumes of activation for diffusion in solids10.1063/1.1744525 ↗
29. Evidence of the Meyer-Neldel rule in InGaAsN alloys and the problem of determining trap capture cross sections10.1063/1.1596713 ↗
30. Schroeder · 1998
31. Origin and consequences of the compensation (Meyer-Neldel) law10.1103/PhysRevB.46.12244 ↗
32. Meyer-Neldel behavior of deep level parameters in heterojunctions to Cu(In,Ga)(S,Se)210.1063/1.117352 ↗