journal article·2016-10

Synthesis and characterization of porous Y 2 SiO 5 with low linear shrinkage, high porosity and high strength

Zhen Wu, Luchao Sun, Jingyang Wang

Ceramics International· Volume 42· Issue 13
Publisher page

Abstract

Abstract The emerging porous Y 2 SiO 5 ceramic is regarded as a promising candidate of thermal insulator owing to its very low thermal conductivity. However, recent works on porous Y 2 SiO 5 are confronted with severe problems such as large linear shrinkage (18.51–20.8%), low porosity (47.74–62%) and low strength (24.45–16.51 MPa) at high sintering temperatures (1450–1500 °C). In this work, highly porous Y 2 SiO 5 ceramic with low shrinkage and excellent high-temperature strength was fabricated by in-situ foam-gelcasting method at 1550 °C. The as-prepared sample has unique multiple pore structures, low linear shrinkages of 6.3–4.5%, controllable high porosities of 60.7–88.4%, high compressive strengths of 38.2–0.90 MPa, and low thermal conductivities of 0.126–0.513 W/(m K) (porosity: 87.1–60.2%). The effects of relative density on relative strength, as well as porosity on thermal conductivity were quantitatively discussed. The present results indicate that porous Y 2 SiO 5 is the potential high-temperature thermal insulation material of light weight, low thermal conductivity, and high strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Processing routes to macroporous ceramics: a review10.1111/j.1551-2916.2006.01044.x ↗
2. Applications of porous ceramics10.4028/www.scientific.net/KEM.122-124.305 ↗
3. Macro-porous ceramics: processing and properties10.1179/1743280411Y.0000000006 ↗
4. Ceramic foams: fabrication, properties and applications10.4028/www.scientific.net/KEM.206-213.1913 ↗
5. Fabrication of highly porous silica thermal insulators prepared by gelation-freezing route10.1111/jace.12723 ↗
6. Porous Y2SiO5 ceramic with low thermal conductivity10.1016/S1005-0302(12)60133-9 ↗
7. Preparation of porous Y2SiO5 ceramics with relatively high compressive strength and ultra-low thermal conductivity by a TBA-based gel-casting method10.1016/j.ceramint.2012.07.014 ↗
8. Microstructure and properties of highly porous Y2SiO5 ceramics produced by a new water-based freeze casting10.1016/j.matdes.2012.11.020 ↗
9. Effects of sintering method and sintering temperature on the microstructure and properties of porous Y2SiO510.1016/j.jmst.2015.09.016 ↗
10. Effects of starch addition amount on microstructure, mechanical properties and room temperature thermal conductivity of porous Y2SiO5 ceramics10.1016/j.ceramint.2015.10.019 ↗
11. Levin · 1969 · 76
12. Thermal properties of single-phase Y2SiO510.1016/j.jeurceramsoc.2008.07.026 ↗
13. Recent progress on synthesis, multi-scale structure, and properties of Y–Si–O oxides10.1179/1743280414Y.0000000033 ↗
14. Porous Y2SiO5 ceramics with a centrosymmetric structure produced by freeze casting10.1016/j.ceramint.2015.05.099 ↗
15. In situ foam-gelcasting fabrication and properties of highly porous γ-Y2Si2O7 ceramic with multiple pore structures10.1016/j.scriptamat.2015.02.024 ↗
16. Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers10.1016/S0955-2219(99)00024-2 ↗
17. Alumina casting based on gelation of gelatine10.1016/S0955-2219(98)00201-5 ↗
18. Gelatin gelcasting of ceramic components10.1016/S0924-0136(02)00862-2 ↗
19. Application of high resolution transmission X-ray tomogrphy in material science10.3724/SP.J.1037.2013.00107 ↗
20. Effect of LiYO2 on the synthesis and pressureless sintering of Y2SiO510.1557/JMR.2008.0085 ↗
21. Preparation and properties of reticulated porous γ-Y2Si2O7 ceramics with high porosity and relatively high strength10.1016/j.ceramint.2014.02.100 ↗
22. The mechanical-properties of cellular solids10.1007/BF02645546 ↗
23. Mechanical properties and damage tolerance of Y2SiO510.1016/j.jeurceramsoc.2008.04.029 ↗
24. Crystallization of various compositions in the Y2O3–SiO2 system10.1557/JMR.1992.0997 ↗
25. Investigation of strut crack formation in open cell alumina ceramics10.1111/j.1151-2916.1994.tb09744.x ↗
26. Computational aspects of effective thermal conductivity of highly porous metal foams10.1016/j.applthermaleng.2003.12.011 ↗
27. Maxwell · 1873
28. Allgemeine gesetzmäßigkeiten für das wärmeleitvermögen verschiedener stoffarten und aggregatzustände10.1007/BF02584103 ↗
29. The electrical resistance of binary metallic mixtures10.1063/1.1702301 ↗
30. A new approach to modelling the effective thermal conductivity of heterogeneous materials10.1016/j.ijheatmasstransfer.2006.02.007 ↗
31. The thermal conductivity of aggregates several phases, including porous materials10.1088/0508-3443/15/3/311 ↗
32. Predictions of effective physical properties of complex multiphase materials10.1016/j.mser.2008.07.001 ↗
33. Preparation and thermal characterization of expanded graphite/paraffin composite phase change material10.1016/j.carbon.2010.03.030 ↗
34. Porous anorthite ceramics with ultra-low thermal conductivity10.1016/j.jeurceramsoc.2013.04.006 ↗
35. Preparation, microstructure and high temperature performances of porous γ-Y2Si2O7 by in situ foam-gelcasting using gelatin10.1016/j.ceramint.2015.07.051 ↗
36. γ-Y2Si2O7, a machinable silicate ceramic: mechanical properties and machinability10.1111/j.1551-2916.2007.01803.x ↗
37. Thermal properties and thermal shock resistance of γ-Y2Si2O710.1111/j.1551-2916.2008.02470.x ↗