journal article·2011-07

ITO-free inverted polymer solar cells using a GZO cathode modified by ZnO

Soo-Ghang Ihn, Kyung-Sik Shin, Mi-Jin Jin, Xavier Bulliard, Sungyoung Yun, Yeong Suk Choi, Yungi Kim, Jong-Hwan Park, Myungsun Sim, Min Kim, Kilwon Cho, Tae Sang Kim, Dukhyun Choi, Jae-Young Choi, Woong Choi, Sang-Woo Kim

Publisher page

Abstract

A gallium-doped ZnO (GZO) layer was investigated and compared with a conventional indium-tinoxide (ITO) layer for use as a cathode in an inverted polymer solar cell based on poly(3-hexylthiophene) (P3HT):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) bulk heterojunctions (BHJ). By modifying the GZO cathode with a ZnO thin layer, a high power conversion efficiency (3.4%) comparable to that of an inverted solar cell employing the same P3HT:PCBM BHJ photoactive layer with a conventional ITO/ZnO cathode was achieved. This result indicates that GZO is a transparent electrode material that can potentially be used to replace high-cost ITO.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration10.1016/j.solmat.2008.12.001 ↗
2. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
3. ITO-free wrap through organic solar cells—A module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
4. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
5. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
6. Conducting and transparent single-wall carbon nanotube electrodes for polymer-fullerene solar cells10.1063/1.2132065 ↗
7. Organic solar cells with carbon nanotubes replacing In2O3:Sn as the transparent electrode10.1063/1.2210081 ↗
8. Organic solar cells with carbon nanotube network electrodes10.1063/1.2209887 ↗
9. Flexible transparent conducting single-wall carbon nanotube film with network bridging method10.1016/j.jcis.2007.10.051 ↗
10. Flexible and transparent SWCNT electrodes for alternating current electroluminescence devices10.1021/am9002588 ↗
11. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
12. Transparent carbon films as electrodes in organic solar cells10.1002/anie.200704909 ↗
13. Organic solar cells with solution-processed graphene transparent electrodes10.1063/1.2924771 ↗
14. Growth of transparent conductive Al-doped ZnO thin films and device applications10.1143/JJAP.45.8453 ↗
15. Organic photovoltaic devices with Ga-doped ZnO electrode10.1063/1.2432951 ↗
16. Electrical and optical properties of In2O3–ZnO films deposited on polyethylene terephthalate substrates by radio frequency magnetron sputtering10.1143/JJAP.42.223 ↗
17. Preparation of boron-doped ZnO thin flms by photo-atomic layer deposition10.1016/S0927-0248(00)00086-6 ↗
18. Effect of Si doping on electrical and optical properties of ZnO thin films grown by sequential pulsed laser deposition10.1088/0022-3727/42/16/165405 ↗
19. The effect of thickness on the properties of Ti-doped ZnO films by simultaneous r.f. and d.c. magnetron sputtering10.1016/j.surfcoat.2004.03.009 ↗
20. Study of electrical and optical properties of Zr-doped ZnO thin films prepared by DC reactive magnetron sputtering10.4028/www.scientific.net/AMR.67.161 ↗
21. Influence of the deposition pressure on the properties of transparent and conductive ZnO:Ga thin-film produced by r.f. sputtering at room temperature10.1016/S0040-6090(02)01184-7 ↗
22. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
23. Polymer solar cells that use self-assembled-monolayer-modified ZnO/metals as cathodes10.1002/adma.200703050 ↗
24. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
25. High performance polythiophene/fullerene bulk-heterojunction solar cell with a TiOx hole blocking layer10.1063/1.2730746 ↗
26. Self-assembled monolayer modified ZnO/metal bilayer cathodes for polymer/fullerene bulk-heterojunction solar cells10.1063/1.2919524 ↗
27. Polymer solar cells that use self-assembled-monolayer-modified ZnO/metals as cathodes10.1002/adma.200703050 ↗
28. Enhancing the photovoltage of polymer solar cells by using a modified cathode10.1002/adma.200602597 ↗
29. Efficient organic solar cells with polyfluorene derivatives as a cathode interfacial layer10.1016/j.orgel.2009.02.009 ↗
30. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
31. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer10.1063/1.3026741 ↗
32. Area dependent efficiency of organic solar cells10.1063/1.2998540 ↗
33. Characterization of organic solar cells: the importance of device layout10.1002/adfm.200700295 ↗
34. Choice of electrode geometry for accurate measurement of organic photovoltaic cell performance
35. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗