Slot-die coating parameters of the low-viscosity bulk-heterojunction materials used for polymer solarcells
Source abstract
Abstract
Abstract Slot-die coating is one of the promising methods for fabricating large-area polymer solar cells (PSCs) due to its compatibility with roll-to-roll printing and one-dimensional direct patterning. In this study, we investigated correlations between conformal film morphology of intermixed poly(3-hexylthiophene) (P3HT) and fullerene derivative [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk-heterojunction (BHJ) material and universal control factors such as shim length, substrate temperature, and coating speed. The observed correlation equation is better matched to the meniscus coating parameter equation rather than to the traditional high-viscosity extrusion slot-die coating parameter equation. Based on our findings regarding the governing factors of the thin film formation of bulk-heterojunction materials, we demonstrated the development of uniform large-area polymer solar cells with power conversion efficiency (PCE) of 3.07% under Air Mass 1.5condition and the possibility of high-throughput production.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
2. For the bright future—bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
3. Air-stable polymer electronic devices10.1002/adma.200602653 ↗
4. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
5. Efficient and flexible ITO-free organic solar cells using highly conductive polymer anodes10.1002/adma.200800338 ↗
6. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
7. Controlled electro-spray deposition of highly conductive PEDOT:PSS films10.1016/j.solmat.2011.10.025 ↗
8. Performance analysis of printed bulk heterojunction solar cells10.1002/adfm.200500581 ↗
9. High photovoltaic performance of inkjet printed polymer:fullerene blends10.1002/adma.200700911 ↗
10. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
11. Gravure printed flexible organic photovoltaic modules10.1016/j.solmat.2010.12.020 ↗
12. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
13. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
14. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
15. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
16. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
17. Roll-to-roll processing of inverted polymer solar cells using hydrated vanadium(V)oxide as a PEDOT:PSS replacement10.3390/ma4010169 ↗
18. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
19. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
20. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
21. Stability of polymer solar cells10.1002/adma.201104187 ↗
22. ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating10.1016/j.solmat.2010.11.025 ↗
23. Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes10.1039/c2nr31508d ↗
24. All printed transparent electrodes through an electrical switching mechanism: a convincing alternative to indium–tin-oxide, silver and vacuum10.1039/c2ee23244h ↗
25. Round-robin studies as a method for testing and validating high-efficiency ITO-free polymer solar cells based on roll-to-roll-coated highly conductive and transparent flexible substrates10.1002/aenm.201200079 ↗
26. All solution processing of ITO-free organic solar cell modules directly on barrier foil10.1016/j.solmat.2012.07.004 ↗
27. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
28. Fabrication and processing of polymer solar cells: a review of printing and coting techniques10.1016/j.solmat.2008.10.004 ↗
29. S. Bagen, G. Gbson, C. Newquist, H. Sago, Next generation coating technologies for low-cost electronics manufacturing, in: IEEE/CPMT International Electronics Manufacturing Technology Symposium, 1996, pp.468–475.
30. L. Wengeler, M. Schmitt, K. Peters, P.Scharfer, W. Schabel, Comparison of large scale coating techniques for organic and hybrid films in polymer based solar cells, Chemical Engineering and Processing; Process Intensification, 10.1016/j.cep.2012.03.004, in press.10.1016/j.cep.2012.03.004 ↗
31. Simple roll coater with variable coating and temperature control for printed polymer solar cells10.1016/j.solmat.2011.08.027 ↗
32. In situ x-ray study of drying-temperature influence on the structural evolution of bulk-heterojunction polymer–fullerene solar cells processed by doctor-blading10.1002/aenm.201100007 ↗
33. A simple theory for the entrained film10.1080/00986449308936124 ↗
34. Fundamentals of sol–gel dip coating, preparation and characterization10.1016/0040-6090(91)90158-T ↗
35. Reduction of collection efficency of charge carriers with increasing cell size in polymer bulk heterojunction solar cells10.1002/adfm.201001578 ↗
36. Annealing-free fabrication of P3HT:PCBM solar cells via simple brush painting10.1016/j.solmat.2009.08.017 ↗