journal article·2015-11

Impact of boron doping profiles on the specific contact resistance of screen printed Ag–Al contacts on silicon

Elmar Lohmüller, Sabrina Werner, Rene Hoenig, Johannes Greulich, Florian Clement

Publisher page

Abstract

Abstract For the contacting of boron-doped emitters with screen-printed metallization in n-type silicon solar cells, usually a small amount of aluminum is added to the silver pastes. To date, low specific contact resistances ρ C in the range of a few mΩ cm 2 have only been achieved with these so-called silver–aluminum (Ag–Al) pastes. Within this work, ρ C is experimentally determined for two Ag–Al pastes for three different boron-doped emitters on alkaline textured and passivated silicon surfaces. The investigated boron doping profiles feature almost identical rising curve progressions up to a depth of ≈60 nm (which corresponds to the depletion zone), with a maximum dopant concentration N max ≈8·10 19 cm −3 . However, they have different junction depths between 570 nm and 980 nm. This work shows that the dopant concentrations with values well below N max following the depletion zone significantly affect the measured ρ C : the deeper the junction, the lower ρ C . This behavior is observed for both investigated Ag–Al pastes. For example, the mean ρ C for paste Ag–Al1 decreases from ρ C ≈4 mΩ cm 2 , determined on a 570 nm deep doping profile, to ρ C ≈2 mΩ cm 2 , determined on a 980 nm deep one. By using an analytical model to calculate ρ C with dependence on e.g. dopant concentration, metal crystallite coverage fraction, and crystallite penetration depth, the lower ρ C for deeper profiles can be explained by crystallites with penetration depths of several 100 nm. The calculations also reveal that the impact of the depletion zone is negligible with respect to ρ C for crystallites deeper than ≈100 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. R. Kopecek, T. Buck, J. Libal, R. Petres, I. Röver, K. Wambach, R. Kinderman, L.J. Geerligs, P. Fath, Large area n-type multicrystalline silicon solar cells with B-emitter: Efficiencies exceeding 14%, in: Proceedings of the 15th International Photovoltaic Science and Engineering Conference, Shanghai, China, 2005, pp. 892–893.
2. Screen printing metallization of boron emitters10.1002/pip.933 ↗
3. Microscopic origin of the aluminium assisted spiking effects in n-type silicon solar cells10.1016/j.solmat.2014.05.036 ↗
4. H. Kerp, S. Kim, R. Lago, F. Recart, I. Freire, L. Pérez, K. Albertsen, C. Jiméno, A. Shaikh, Development of screen printable contacts for P emitters in bifacial solar cells, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, Dresden, Germany, 2006, pp. 892–894.
5. A. Richter, M. Hörteis, J. Benick, S. Henneck, M. Hermle, S.W. Glunz, Towards industrially feasible high-efficiency n-type Si solar cells with boron-diffused front side emitter-combining firing stable Al2O3 passivation and fine-line printing, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, Hawaii, USA, 2010, pp. 3587–3592.10.1109/PVSC.2010.5614369 ↗
6. Metallization-induced recombination losses of bifacial silicon solar cells10.1002/pip.2479 ↗
7. F. Kiefer, R. Peibst, T. Ohrdes, J. Krügener, H.J. Osten, R. Brendel, Emitter recombination current densities of boron emitters with silver/aluminum pastes, in: Proceedings of the 40th IEEE Photovoltaic Specialists Conference, Denver, USA, 2014, pp. 2808–2812.10.1109/PVSC.2014.6925514 ↗
8. Improving screen printed metallization for large area industrial solar cells based on n-type material10.1016/j.egypro.2011.06.171 ↗
9. E. Lohmüller, S. Werner, B. Thaidigsmann, N. Wöhrle, S. Mack, F. Clement, D. Biro, The HIP-MWT+ solar cell concept on n-type silicon and metallization-induced voltage losses, in: Proceedings of the 29th European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, Netherlands, 2014, pp. 635–641.
10. Formation of Ag/Al screen-printing contacts on B emitters10.1109/JPHOTOV.2014.2364117 ↗
11. Reverse bias behavior of diffused and screen-printed n-type Cz-Si solar cells10.1109/JPHOTOV.2014.2355034 ↗
12. S. Riegel, F. Mutter, G. Hahn, B. Terheiden, Contact formation in the silver/aluminum thick film firing process – a phenomenological approach, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010, pp. 2353–2356.
13. Review on screen printed metallization on p-type silicon10.1016/j.egypro.2012.05.003 ↗
14. Influence of emitter properties on contact formation to p+ silicon10.1016/j.egypro.2013.07.338 ↗
15. Current crowding on metal contacts to planar devices10.1109/T-ED.1969.16904 ↗
16. E. Lohmüller, S. Werner, J. Schön, M. Thanasa, S. Mack, W. Wolke, A. Wolf, F. Clement, D. Biro, Depletion of boron-doped surfaces protected with barrier layers during POCl3-diffusion, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013, pp. 1043–1047.
17. Doping profile analysis in Si by electrochemical capacitance–voltage measurements10.1149/1.2044101 ↗
18. R. Bock, P.P. Altermatt, J. Schmidt, Accurate extraction of doping profiles from electrochemical capacitance voltage measurements, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2008, pp. 1510–1513.
19. Redistribution of acceptor and donor impurities during thermal oxidation of silicon10.1063/1.1713825 ↗
20. A.L. Blum, J.S. Swirhun, R.A. Sinton, A. Kimmerle, An updated analysis to the WCT-120 QSSPC measurement system using advanced device physics, in: Proceedings of the 28th European Photovoltaic Solar Energy Conference and Exhibition, Paris, France, 2013, pp. 1521–1523.
21. Impact of excess phosphorus doping and Si crystalline defects on Ag crystallite nucleation and growth in silver screen-printed Si solar cells10.1002/pip.2440 ↗
22. Simulating the interface morphology of silver thick film contacts on n-type Si-(100) and Si-(111)10.1063/1.4752228 ↗
23. Experimental evidence of direct contact formation for the current transport in silver thick film metallized silicon emitters10.1063/1.3665718 ↗
24. Schubert · 2006
25. Kontermann · 2009
26. Hoenig · 2014
27. Sze · 1981
28. Electron tunneling and contact resistance of metal-silicon contact barriers10.1016/0038-1101(70)90056-0 ↗
29. A model for specific contact resistance applicable for titanium silicide-silicon contacts10.1016/0038-1101(96)00091-3 ↗
30. Field and thermionic-field emission in Schottky barriers10.1016/0038-1101(66)90097-9 ↗
31. Solar cell contact resistance-a review10.1109/T-ED.1984.21583 ↗
32. Normalized thermionic-field (T-F) emission in metal-semiconductor (Schottky) barriers10.1016/0038-1101(69)90117-8 ↗
33. Direct measurement of the dielectric constants of silicon and germanium10.1103/PhysRev.92.1396 ↗
34. Analytic approximations for the Fermi energy of an ideal Fermi gas10.1063/1.89697 ↗
35. K.-H. Oh, J.-H. Chun, K. Banerjee, C. Duvvury, R.W. Dutton, Modeling of temperature dependent contact resistance for analysis of ESD reliability, in: Proceedings of the 41st IEEE Reliability Physics Symposium, Dallas, USA, 2003, pp. 249–255.
36. Schottky barriers on p-type silicon10.1016/0038-1101(71)90049-9 ↗
37. Reverse current–voltage characteristics of metal-silicide Schottky diodes10.1016/0038-1101(70)90098-5 ↗
38. Specific contact resistance of metal–semiconductor barriers10.1016/0038-1101(71)90129-8 ↗
39. Rhoderick · 1988
40. On the calculation of specific contact resistivity on <100> Si10.1109/16.106252 ↗
41. Models for numerical device simulations of crystalline silicon solar cells—a review10.1007/s10825-011-0367-6 ↗
42. Metal–silicon Schottky barriers10.1016/0038-1101(68)90041-5 ↗
43. Recent advances in Schottky barrier concepts10.1016/S0927-796X(01)00037-7 ↗
44. Atomistic simulation of doping effects on growth and charge transport in Si/Ag interfaces in high-performance solar cells10.1103/PhysRevB.86.245319 ↗
45. Intrinsic concentration, effective densities of states, and effective mass in silicon10.1063/1.345414 ↗
46. Temperature dependence of the band gap of silicon10.1063/1.1663501 ↗