Towards the efficiency limits of multicrystalline silicon solar cells
Source abstract
Abstract
Abstract In this contribution, we present our recent results for high efficiency multicrystalline silicon solar cells. Based on n-type high-performance multicrystalline silicon substrates in combination with the TOPCon solar cell concept featuring a full area passivating back contact and a boron-diffused emitter as well as a plasma-etched black-silicon texture at the front side, a certified conversion efficiency of 22.3% has been achieved, which is currently the world record efficiency for multicrystalline silicon solar cells. A detailed loss analysis of the record solar cell batch discloses the nature of the remaining loss mechanisms, revealing the route for further improvements. We observe an efficiency gap between the multicrystalline and the FZ reference solar cells of ~1%abs. Compared to the FZ reference cells, the mc-Si cells also feature a significantly larger scattering in Voc and Jsc as well as a fill factor loss of ~1.5%abs. We show that the scattering in Jsc correlates with the area fraction of recombination-active structural crystal defects and the scattering in Voc additionally with lateral emitter-induced inhomogeneities. The fill factor loss is attributed to the general presence of strongly recombination-active grain boundaries. A detailed loss analysis of the record mc-Si solar cell shows that the major electrical losses are due to recombination at grain boundaries (0.7%abs) and recombination in the emitter (0.6%abs). By reducing these electrical loss channels, e.g. by an improved crystallization process together with a hydrogenation of the bulk and application of an adapted emitter, we expect to reach efficiencies for mc-Si solar cells in the range of 23%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
2. Optimized multicrystalline silicon for solar cells enabling conversion efficiencies of 22%10.1016/j.solmat.2017.06.005 ↗
3. High-efficiency n-type HP mc silicon solar cells10.1109/JPHOTOV.2017.2714139 ↗
4. Minority carrier lifetime imaging of silicon wafers calibrated by quasi-steady-state photoluminescence10.1016/j.solmat.2010.12.016 ↗
5. Material limits of multicrystalline silicon from state-of-the-art photoluminescence imaging techniques
6. High-efficiency multicrystalline silicon solar cells: potential of n-type doping10.1109/JPHOTOV.2015.2466474 ↗
7. The influence of structural defects on phosphorus diffusion in multicrystalline silicon10.1016/j.solmat.2006.06.020 ↗
8. The concept of skins for silicon solar cell modeling10.1016/j.solmat.2017.05.012 ↗
9. Simulating the effect of lifetime non-uniformity on solar cell performance using cmd-PC1D 6 and griddler 210.1016/j.egypro.2016.07.011 ↗
10. Numerical quantification and minimization of perimeter losses in high-efficiency silicon solar cells10.1002/(SICI)1099-159X(199609/10)4:5<355::AID-PIP145>3.0.CO;2-X ↗
11. 3-D simulation of interdigitated-back-contact silicon solar cells with quokka including perimeter losses10.1109/JPHOTOV.2014.2320302 ↗
12. n-type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
13. Improved modeling of grain boundary recombination in bulk and p‐n junction regions of polycrystalline silicon solar cells10.1063/1.363806 ↗
14. Development of a three-dimensional numerical model of grain boundaries in highly doped polycrystalline silicon and applications to solar cells10.1063/1.1456962 ↗
15. Three-dimensional TCAD modeling of grain boundaries in high-efficiency silicon solar cells10.1109/JPHOTOV.2016.2549739 ↗
16. R. Müller, F. Schindler, A. Richter, P. Krenckel, B. Michl, F. Feldmann, S. Riepe, J. Benick, M.C. Schubert, S.W. Glunz, Impact of Crystal Defects on Record Efficiency n-type Multicrystalline Silicon Solar Cells, in: presented at the Silicon Workshop in Breckenridge.
17. Theory of analyzing free energy losses in solar cells10.1063/1.3006053 ↗