journal article·2016-12

Influence of sodium incorporation on kesterite Cu2ZnSnS4 solar cells fabricated on stainless steel substrates

Kaiwen Sun, Fangyang Liu, Chang Yan, Fangzhou Zhou, Jialiang Huang, Yansong Shen, Rong Liu, Xiaojing Hao

Publisher page

Abstract

Abstract Kesterite Cu2ZnSnS4 (CZTS) thin film solar cells are fabricated based on sputtering and post sulfurization process on stainless steel substrates. NaF layers with different thickness are used as external sodium source to address the lack of Na issue in Na-free steel substrates and 10 nm of NaF layer is proved to be the optimal thickness. Sodium incorporation into CZTS induces the metal element redistribution, facilitates CZTS film recrystallization and promotes the phase evolution. Appropriate amount of sodium is evidenced to yield an enhancement in power conversion efficiency from 3.07% to 4.10% whilst further increase in sodium tends to deteriorate the device efficiency. Device performance deterioration is correlated to the rather small grain size accompanied with a large amount of grain boundaries and unfavorable SnS2 secondary phase for CZTS samples without sodium, while pinholes and lower carrier density in absorber for CZTS samples with over amount of sodium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Device characteristics of CZTSSe Thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Flexible Cu2ZnSnS4 solar cells based on successive ionic layer adsorption and reaction method10.1039/C3RA47823H ↗
3. P. Bras, J. Sterner, Influence of H2S annealing and buffer layer on CZTS solar cells sputtered from a quaternary compound target, in: Proceedings of 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 2014, pp. 0328–0331.10.1109/PVSC.2014.6924924 ↗
4. Earth-abundant absorber based solar cells onto low weight stainless steel substrate10.1016/j.solmat.2014.07.030 ↗
5. Fabrication of Cu2ZnSnS4 solar cell on a flexible glass substrate10.1016/j.tsf.2014.03.054 ↗
6. Hydrophilic Cu2ZnSnS4 nanocrystals for printing flexible, low-cost and environmentally friendly solar cells10.1039/c2ce06552e ↗
7. Earth-abundant and low-cost CZTS solar cell on flexible molybdenum foil10.1039/C4RA02064B ↗
8. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
9. Cu2ZnSnSe4 Thin-film solar cells by thermal co-evaporation with 11.6% efficiency and improved minority carrier diffusion length
10. Effects of back contact instability on Cu2ZnSnS4 devices & processes10.1021/cm4015223 ↗
11. H. Sugimoto, C. Liao, H. Hiroi, N. Sakai, T. Kato, Lifetime improvement for high efficiency Cu2ZnSnS4 submodules, in: Proceedings of 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC), 2013, pp. 3208–3211.10.1109/PVSC.2013.6745135 ↗
12. S. Tajima, T. Itoh, H. Hazama, K. Ohishi, R. Asahi, Improvement of the open-circuit voltage of Cu2ZnSnS4 cells using a two-layered process, in: 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 2014, pp. 0431–0434.10.1109/PVSC.2014.6924951 ↗
13. Physical and electrical characterization of high-performance Cu2ZnSnSe4 based thin film solar cells10.1016/j.tsf.2014.10.052 ↗
14. Efficiency Electrodeposited Cu2ZnSnS4 Solar Cell10.1002/aenm.201100526 ↗
15. Pure sulfide Cu2ZnSnS4 thin film solar cells fabricated by preheating an electrodeposited metallic stack10.1002/aenm.201301381 ↗
16. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
17. Kesterite Cu2ZnSnS4 thin film solar cells by a facile DMF-based solution coating process10.1039/C5TC01750E ↗
18. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
19. Cation Substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗
20. Fabrication of Cu2ZnSnS4 screen printed layers for solar cells10.1016/j.solmat.2010.06.010 ↗
21. Influence of hydrogen sulfide annealing on copper–zinc–tin–sulfide solar cells sputtered from a quaternary compound target10.1016/j.tsf.2014.11.004 ↗
22. Spray pyrolysis of barrier layers for flexible thin film solar cells on steel10.1016/j.solmat.2010.09.010 ↗
23. Cu(In,Ga)Se2 solar cells on stainless-steel substrates covered with ZnO diffusion barriers10.1016/j.solmat.2008.12.004 ↗
24. Cu(In,Ga)Se2 solar cells on stainless steel substrates covered with insulating layers10.1016/S0927-0248(02)00099-5 ↗
25. Diffusion of Fe and Na in co-evaporated Cu(In,Ga)Se2 devices on steel substrates10.1016/j.tsf.2012.11.067 ↗
26. Alternative sodium sources for Cu(In,Ga)Se2 thin-film solar cells on flexible substrates10.1016/j.tsf.2011.01.399 ↗
27. The evolution of silicon wafer cleaning technology10.1149/1.2086825 ↗
28. Effects of sodium incorporation in Co-evaporated Cu2ZnSnSe4 thin-film solar cells10.1063/1.4802972 ↗
29. The Role of sodium as a surfactant and suppressor of non-radiative recombination at internal surfaces in Cu2ZnSnS4
30. Source and effects of sodium in solution-processed kesterite solar cells10.1002/pssa.201532619 ↗
31. The effect of Na in polycrystalline and epitaxial single-crystal CuIn1−xGaxSe210.1016/j.tsf.2004.11.038 ↗
32. Grain size and Texture of Cu2ZnSnS4 Thin Films Synthesized by Cosputtering Binary Sulfides and Annealing: Effects of Processing Conditions and Sodium10.1007/s11664-011-1729-3 ↗
33. Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells10.1016/j.solmat.2011.10.019 ↗
34. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
35. Synthesis, characterization, and electronic structure of single-crystal SnS, Sn2S3, and SnS210.1021/cm403046m ↗
36. Effect of laser incident energy on the structural, morphological and optical properties of Cu2ZnSnS4 (CZTS) thin films10.1016/j.cap.2009.07.023 ↗
37. Electrically Benign Behavior of Grain Boundaries in Polycrystalline CuInSe2 Films10.1103/PhysRevLett.99.235504 ↗
38. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
39. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
40. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
41. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
42. Optical properties of Cu(In,Ga)Se2 and Cu2ZnSn(S,Se)410.1016/j.tsf.2010.12.217 ↗