journal article·2016-01

Tungsten doped indium oxide film: Ready for bifacial copper metallization of silicon heterojunction solar cell

Jian Yu, Jiantao Bian, Weiyuan Duan, Yucheng Liu, Jianhua Shi, Fanying Meng, Zhengxin Liu

Publisher page

Abstract

Abstract Tungsten doped indium oxide (IWO) film was deposited by reactive plasma deposition technology for a-Si:H/c-Si heterojunction (SHJ) solar cell. The average transmittance and absorption of IWO film from 350 to 1200 nm wavelength was 88.33% and 2.16% respectively. The hall mobility is 77.8 cm2/Vs, with a corresponding carrier concentration of 2.86E20 cm−3 and resistivity of 2.80E−04 Ω cm. Based on high-performance IWO film, the 5 in. SHJ solar cell with efficiency value of 22.03% and power of 3.37 W was obtained by electroplated copper metallization technology. Compared with screen printed SHJ solar cells, the fingers of electroplated cells show finer width, higher aspect ratio and lower series resistance, resulting in increased fill factor and higher efficiency. The long term stability test of copper electroplated cells reveal that IWO film has excellent stability at the solar cell modules׳ operating temperature and can prevent copper diffusion effectively, which makes copper metallization of high efficiency heterojunction solar cell possible.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Revisiting the theory and usage of junction capacitance: application to high efficiency amorphous/crystalline silicon heterojunction solar cells10.1016/j.solmat.2014.09.002 ↗
2. Development status of high-efficiency HIT solar cells10.1016/j.solmat.2010.04.030 ↗
3. Efficient heterojunction solar cells on p-type crystal silicon wafers10.1063/1.3284650 ↗
4. Ayumu Yano, Satoshi Tohoda, Kenta Matsuyama, Yuya Nakamura, Takeshi Nishiwaki, Kazunori Fujita, Mikio Taguchi, Eiji Maruyama, 24.7% Record efficiency hit solar cell on thin silicon wafer, in: Proceedings of the 28th EU PVSEC, 2013. pp. 748–751
5. 〈http://panasonic.co.jp/corp/news/official.data/data.dir/2014/04/en140410-4/en/140410-4.html〉
6. A. Letize, B. Lee, K. Crouse, D. Cullen, Light induced plating of silicon solar cell conductors using a novel low acid, high speed copper electroplating process, in: Proceedings of the 28th EU PVSEC, 2013. pp. 2016–2019
7. Silicon heterojunction solar cells with copper-plated grid electrodes: status and comparison with silver thick-film techniques10.1109/JPHOTOV.2014.2321663 ↗
8. >23% High-efficiency tunnel oxide junction bifacial solar cell with electroplated cu gridlines10.1109/JPHOTOV.2014.2360565 ↗
9. Effects of bath composition on the morphology of electroless-plated Cu electrodes for hetero-junctions with intrinsic thin layer solar cell10.1016/j.tsf.2015.02.039 ↗
10. P. Papet, J. Hermans, T. Söderström, M. Cucinelli, L. Andreetta, D. Bätzner, W. Frammelsberger, D. Lachenal, J. Meixenberger, B. Legradic, B. Strahm, G. Wahli, W. Brok, J. Geissbühler, A. Tomasi, C. Ballif, E. Vetter, S. Leu, Heterojunction solar cells with electroplated Ni/Cu front electrode, in: Proceedings of the 28th EU PVSEC, 2013 pp. 1976–1979
11. D. Muñoz, T. Desrues, A.S. Ozanne, S. de Vecchi, S. Martín de Nicolás, F. Jay, F. Souche, N. Nguyen, C. Denis, C. Arnal, G. d׳Alonzo, J. Coignus, W. Favre, T. Blevin, A. Valla, F. Ozanne, T. Salvetat, P.J. Ribeyron, Key aspects on development of high efficiency heterojunction and IBC-heterojunction solar cells. Towards 22% efficiency on industrial size, in: Proceedings of the 27th EU PVSEC, 2012.
12. J.L. Hernández, D. Adachi, D. Schroos, N. Valckx, N. Menou, T. Uto, M. Hino, M. Kanematsu, H. Kawasaki, R. Mishima, K. Nakano, H. Uzu, T. Terashita, K. Yoshikawa, T. Kuchiyama, M. Hiraishi, N. Nakanishi, M. Yoshimi, K. Yamamoto, High efficiency copper electroplated heterojunction solar cells and modules-the path towards 25% cell efficiency, in: Proceedings of the 28th EU PVSEC, 2013
13. Formation of copper silicides from Cu(100)/Si(100) and Cu(111)/Si(111) structures10.1063/1.345194 ↗
14. High-mobility hydrogen-doped In2O3 transparent conductive oxide for a-Si:H/c-Si heterojunction solar cells10.1016/j.solmat.2008.09.047 ↗
15. Jianhua Shi, Fanying Meng, Zhongdan Lu, Yanfeng Cui, Zhengxin Liu, Crystalline ITO thin films fabricated by reactive plasma deposition at room temperature for the application to a-Si:H/c-Si heterojunction solar cells, in: Proceedings of the PVSEC Taiwan, 2013
16. Performance of electron beam deposited tungsten doped indium oxide filmsas anodes in organic solar cells10.1016/j.solmat.2011.03.020 ↗
17. Rapid thermal annealed WO3-doped In2O3 films for transparent electrodes in organic photovoltaics10.1088/0022-3727/45/39/395104 ↗
18. High quality of IWO films prepared at room temperature by reactive plasma deposition for photovoltaic devices10.1088/0022-3727/46/7/075103 ↗
19. High mobility transparent conductive W-doped In2O3 thin films prepared at low substrate temperature and its application to solar cells10.1016/j.solmat.2013.11.030 ↗
20. Design and fabrication of a SiOx/ITO double-layer anti-reflective coating for heterojunction silicon solar cells10.1016/j.solmat.2013.05.044 ↗
21. Jian Yu , Yu Qiu, Jiantao Bian, Yucheng Liu, Fanying Meng, Zhengxin Liu, Electroplated copper electrodes for silicon hetero-junction solar cells >21%, in: Grand Renewable Energy Conference Tokyo, Japan, 2014. P-PV-3-4.
22. Tungsten-doped indium oxide thin film as an effective high-temperature copper diffusion barrier10.1149/2.003406ssl ↗
23. Quick determination of copper-metallization long-term impact on silicon solar cells10.1149/1.3466984 ↗
24. Long term stability of copper front side contacts for crystalline silicon solar cells10.1016/j.solmat.2014.12.024 ↗