journal article·2014-05Open access

Challenges and prospects for developing CdS/CdTe substrate solar cells on Mo foils

B.L. Williams, J.D. Major, L. Bowen, L. Phillips, G. Zoppi, I. Forbes, K. Durose

Abstract

ITO/ZnO/CdS/CdTe/Mo solar cells have been grown in the substrate configuration by a combination of close-space sublimation and RF sputtering. A peak efficiency of 8.01% was achieved. A two stage CdCl2 annealing process was developed, with the first stage contributing to CdTe doping and the second being linked to CdTe/CdS interdiffusion by secondary ion mass spectrometry analysis. The inclusion of a ZnO layer between CdS and ITO layers improved performance significantly (from η=6% to η=8%) by increasing the shunt resistance, RSH, from 563 Ω cm2 to 881 Ω cm2. Cross-sectional scanning electron microscopy highlighted the importance of the resistive ZnO layer as numerous pinholes and voids exist in the CdS film. Solar cell performance was also investigated as a function of CdTe thickness, with optimal thicknesses being in the range 3–6 μm. All devices were deemed to be limited principally by a non-Ohmic back contact, the Schottky barrier height being determined to be 0.51 eV by temperature dependent J–V measurements. Modelling of device performance using SCAPS predicted efficiencies as high as 11.3% may be obtainable upon formation of an Ohmic back-contact. SCAPS modelling also demonstrated that a quasi-Ohmic back-contact may be achievable via inclusion of a highly p-doped (~1018 cm−3) buffer layer, between CdTe and Mo, which also has an optimal electron affinity (4.2 eV). The evaluation of device processing and the in-depth characterisation presented here provides a number of insights towards the continued improvement of substrate cell performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. First Solar Inc. Press Release 〈http://investor.firstsolar.com/Releasedetail.Cfm?Releaseid=743398〉 (accessed on 14/11/13).
2. Thin-film CdS/CdTe solar cell with 15.8% efficiency10.1063/1.109629 ↗
3. CdTe and related compounds
4. Losses due to polycrystallinity in thin-film solar cells10.1016/S0927-0248(98)00045-2 ↗
5. High-efficiency polycrystalline CdTe thin-film solar cells10.1016/j.solener.2004.06.006 ↗
6. Control of grain size in sublimation-grown CdTe, and the improvement in performance of devices with systematically increased grain size10.1016/j.solmat.2010.02.034 ↗
7. Polycrystalline CdTe thin films for photovoltaic applications10.1016/j.pcrysgrow.2006.09.001 ↗
8. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil10.1038/ncomms3306 ↗
9. CdTe/CdS thin film solar cells grown in substrate configuration10.1002/pip.2233 ↗
10. R.G. Dhere, J.N. Duenow, C.M. DeHart, J.V. Li, D. Kuciauska, T.A. Gessert, Development of substrate structure CdTe photovoltaic devices with performance exceeding 10%, in: Conference Record of the 38th IEEE PV Specialists Conference, Austin, TX, 2012.10.1109/PVSC.2012.6318260 ↗
11. Cadmium telluride solar cells on molybdenum substrates10.1557/PROC-668-H8.23 ↗
12. J. Drayton, A. Vasko, A. Gupta, A.D. Compaan, Magnetron sputtered CdTe solar cells on flexible substrates, in: Conference Record of the31st IEEE Photovoltaic Specialists Conference, IEEE, New York, 2005, p. 406–409.10.1109/PVSC.2005.1488155 ↗
13. Mechanical properties and adhesion of CdTe/CdS thin film solar cells deposited on flexible foil substrates
14. Design issues in the fabrication of CdS/CdTe solar cells on molybdenum foil substrates10.1016/S0927-0248(02)00289-1 ↗
15. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
16. Focussed ion beam and field emission gun-scanning electron microscopy for the investigation of voiding and interface phenomena in thin-film solar cells10.1002/pip.1164 ↗
17. Structural and chemical interface characterization of CdTe solar cells by transmission electron microscopy10.1016/S0040-6090(03)00268-2 ↗
18. Lide · 2008
19. MOCVD of Cd1-xZnxS/CdTe PV cells using an ultra-thin absorber layer10.1016/j.solmat.2012.02.018 ↗
20. Effect of back-contact barrier on thin-film CdTe solar cells10.1016/j.tsf.2006.01.004 ↗
22. Device analysis methods for physical cell parameters of CdTe/Cds solar cells10.1016/S0040-6090(99)00862-7 ↗
23. M. Alturkestani, Cells: Key Layers and Electrical Effects (Ph.D. Thesis), University of Durham, UK, 2010.
24. Sze · 1982
25. Current transport mechanisms of electrochemically deposited CdS/CdTe heterojunction10.1016/0038-1101(84)90088-1 ↗
26. M. Gloeckler, A.L. Fahrenbruch, J.R. Sites, Numerical modeling of CIGS and CdTe solar cells: setting the baseline, in: Proceedings of 3rd World Conference on PV Energy Conversion, vols. A–C, WCPEC-3 Organizing Committee, Tokyo, 2003.
27. Exploring back contact technology to increase CdS/CdTe solar cell efficiency10.1557/PROC-1012-Y07-05 ↗