journal article·2009-02

Optimization of fabrication process of high-efficiency and low-cost crystalline silicon solar cell for industrial applications

Jaehyeong Lee, N. Lakshminarayan, Suresh Kumar Dhungel, Kyunghae Kim, Junsin Yi

Publisher page

Abstract

Abstract The process conditions for a high-efficiency and low cost crystalline silicon solar cell were optimized. Novel approaches such as wafer cleaning and saw -damage removal using 0.5 wt% of 2,4,6-trichloro-1,3,5-triazine, silicon surface texturing with optimized pyramid heights (∼5 μm), and a third step of drive-in after phosphosilicate glass (PSG) removal followed by oxide removal were investigated. A simple method of chemical etching adopted for edge isolation was optimized with edge etching of 5–10 μm, without any penetration of chemicals between the stacked wafers. The conversion efficiency, open-circuit voltage, short-circuit current, and fill factor of the cell fabricated with the optimized process were a maximum of 17.12%, 618.4 mV, 5.32 A, and 77% under AM1.5 conditions, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Optimum design for bifacial silicon solar cells10.1016/S0960-1481(00)00025-2 ↗
2. A. Rohatgi, William Cherry Award Presentation, in: Third World Conference on Photovoltaic Energy Conversion, Osaka, 2003.
3. W. Schmidt, Potential of crystalline silicon solar cells, in: Proceedings of the 2nd World Renewable Energy Congress, UK, 1992, pp. 240–249.
4. L. Kazmerski, Photovoltaic technology: the status and the future, in: Proceedings of the 2nd World Renewable Energy Congress, UK, 1992, pp. 101–113.
5. High-efficiency low-cost integral screen-printing multicrystalline silicon solar cells10.1016/S0927-0248(02)00060-0 ↗
6. Novel low-cost approach for removal of surface contamination before texturization of commercial monocrystalline silicon solar cells10.1016/j.solmat.2007.03.025 ↗
7. Wolf · 1986 · 1
8. Texturing of large area multi-crystalline silicon wafers through different chemical approaches for solar cell fabrication10.1016/j.solmat.2008.02.036 ↗
9. S.K. Dhungel, Crystalline silicon surface passivation and texturing for high efficiency industrial solar cell application, Ph.D. Thesis, Department of Electronic and Electrical Engineering, Sungkyunkwan University, Suwon, Republic of Korea, 2007.
10. A novel approach for co-firing optimization in RTP for the fabrication of large area mc-Si solar cell10.1016/j.tsf.2005.12.131 ↗
11. J.C.C. Tsai, Shallow phosphorus diffusion profiles in silicon, in: Proceedings of the IEEE, vol. 57, IEEE, 1969, pp. 1499–1506.10.1109/PROC.1969.7325 ↗
12. M.Y. Ghannam, S. Sivoththaman, H.E. Elgamel, J. Nijs, M. Rodot, D. Sarti, 636mV Open circuit voltage multicrystalline silicon solar cells on POLIX Material: trade-off between short circuit current and open circuit voltage, in: Proceedings of the 23rd IEEE photovoltaic specialists conference, Louisville, KY, USA, 1993, pp. 106–110.10.1109/PVSC.1993.347070 ↗
13. K. Faika, R. Kühn, P. Fath, E. Bucher, Novel techniques to prevent edge isolation of silicon solar cells by avoiding leakage currents between the emitter and the aluminum contact, in: Proceedings of the 16th European Solar Energy Conference and Exhibition, Glasgow, UK, 2000, pp. 1173–1176.
14. Low-cost back contact silicon solar cells10.1109/16.791988 ↗
15. Screen printed titanium oxide and PECVD silicon nitride as antireflection coating on silicon solar cells10.1016/S0960-1481(97)00030-X ↗