Gelatin-based solid electrolyte releasing Li+ for smart window applications
Source abstract
Abstract
Gelatin-based solid electrolyte (GSE) has been prepared, characterized and successfully applied to a small electrochromic device (ECD). The gelatin was cross-linked with formaldehyde, plasticized with glycerol and contained different quantities from LiClO 4 or LiCl. The physical properties of these membranes were studied by impedance spectroscopy, X-ray diffraction, thermal analysis, mechanical test and UV–visible spectrophotometry. The XRD results indicated that all membranes are predominantly amorphous with some localized ordering. The DSC results proved that the samples exhibited high stability with low glass transition temperature of −100 °C. The ionic conductivity showed highest values of 1.04×10 −4 S/cm at 13 wt% LiClO 4 and 2.02×10 −4 S/cm at 10 wt% LiCl, which is attributed to increase of the number of charge carriers. Results of ionic conductivity/temperature measurements fitted linearly to VTF behavior, independent of salt contents, indicating contribution of polymeric chain movement to ionic transport of Li + . Low values of activation energy, namely, 9.37 and 6.31 kJ/mol have been deduced for samples containing LiClO 4 and LiCl, respectively, which showed highest conductivities. In addition, the activation energy dropped from 11.57 to 6.31 kJ/mol as the LiCl contents increased from 4 to 10 wt%. Mechanical investigation showed that addition of Li salts enhanced noticeably the membrane elasticity which improved polymeric chains movement with subsequent increase of Li ions transport. At λ<280 nm, the membranes exhibited ~90% transmittance. Membranes possessing highest conductivity combined with high transparency and showing good adhesion to both counter and working electrodes were assembled in a smart window device of configuration (glass/FTO/NiO/GSE/WO 3 /FTO/glass). The device has been characterized by cyclic voltammetry (CV) and chronoamperometry (CA), and showed good performance and stability in cycling between coloring and bleached states at ( ± 2 V ) . It showed transmittance change of 38% at λ=600 nm, response time 60 s, inserted charge −35 mC/cm 2 and a coloration efficiency of 23 cm 2/C. The obtained results of mechanical, ionic conductivity, adhesion to electrodes and high transmittance properties in combination with the performance of the assembled device indicate that GSE is promising for electrochromic smart window application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Advanced Battery Materials and Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Enhanced smart window based on electrochromic (EC) polymers10.1117/12.484393 ↗
2. Enhanced contrast ratios and rapid-switching color-changeable devices based on poly(3,4-propylenedioxythiophene) derivative and counter electrode10.1117/12.475192 ↗
3. The history of polymer electrolytes10.1016/0167-2738(94)90419-7 ↗
4. 1995
5. Review article issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
6. 1987 · vol. 1 and 2
7. All-solid-state electrochromic window of electrodeposited WO3 and prussian blue with poly(ethylene oxide) gel electrolyte10.1143/JJAP.36.5747 ↗
8. All solid-state electrochromic smart window of electrodeposited WO3 and prussian blue film with PVC gel electrolyte10.1016/S0968-5677(98)00096-0 ↗
9. 1998
10. Agnihotry, solvent effect on gel electrolytes containing lithium salts10.1016/S0167-2738(00)00584-1 ↗
11. Study of proton conducting pva based gel electrolyte
12. Di-ureasil hybrids doped with LiBF4: attractive candidates as electrolytes for smart windows10.1016/S1452-3981(23)18257-5 ↗
13. Optimization of performances of gelatin/LiBF4-based polymer electrolytes by plasticizing effects10.1016/j.electacta.2009.04.039 ↗
14. Development of electrochromic cells by the sol–gel process10.1016/S0927-0248(98)00063-4 ↗
15. All sol–gel electrochromic devices with Li+ ionic conductor, WO3 electrochromic films and SnO2 counter-electrode films10.1023/A:1008697101623 ↗
16. Investigation of new ion-conducting ORMOLYTES: structure and properties10.1007/BF02436927 ↗
17. New Li+ ion-conducting ormolytes10.1016/S0927-0248(97)00217-1 ↗
18. Characterization of an all sol–gel electrochromic device WO3/ormolyte/CeO2–TiO210.1023/A:1008751630771 ↗
19. Transport properties of a new Li+ ion-conducting ormolyte: (SiO2–PEG)–LiCF3SO310.1039/B205335G ↗
20. Transport property of novel sono-catalysed LiCF3SO3 doped SiO2–PEG ormolyte10.1088/0022-3727/36/5/316 ↗
21. Organic–inorganic hybrid ionic conductor prepared by sol–gel process10.1016/S0927-0248(00)00363-9 ↗
22. Chitin/chitosan: modifications and their unlimited application potential an overview10.1016/j.tifs.2006.10.022 ↗
23. Nuclear magnetic resonance and conductivity study of HEC/polyether-based polymer electrolytes10.1016/S0013-4686(00)00768-4 ↗
24. Solid polymeric electrolytes networks of hydroxypropylcellulose with jeffamine
25. Electrochromic devices with starch based solid polymeric electrolytes
26. Preparation and characterization of starch grafted with toluene poly (propylene oxide) disocyanate.10.1590/S1516-14392001000200006 ↗
27. Influence of plasticizer type on the properties of polymer electrolytes based on chitosan10.1021/jp801573h ↗
28. ‘Electrical behavior of proton-conducting Chitosan phosphoric acid-based electrolytes’10.1016/j.physb.2006.08.038 ↗
29. Agar-based films for application as polymer electrolytes10.1016/j.electacta.2009.06.010 ↗
30. Conductivity study of a gelatin-based polymer electrolyte10.1016/j.electacta.2007.04.034 ↗
31. Solid-state electrochromic devices with Nb2O5: Mo thin film and gelatin-based electrolyte10.1016/j.electacta.2007.05.065 ↗
32. Electrochromic devices with solid electrolytes based on natural polymers10.1080/15421400490482033 ↗
33. Effects of plasticizer on physical properties of pig skin gelatin films10.1016/j.foodhyd.2006.09.014 ↗
34. All solid-state electrochromic devices with gelatin-based electrolyte10.1016/j.solmat.2007.02.025 ↗
35. A. Pawlicka, A. Firmino, D.F. Vieira, F. Sentanin, J.G. Grote, F. Kajzar, Gelatin- and DNA-based ionic conducting membranes for electrochromic devices, Proceedings of SPIE 7487, Optical Materials in Defence Systems Technology VI, vol. 74870J, 2009.
36. Design and electrical conductivity of poly(acrylic acid‐g‐gelatin)/graphite conducting gel10.1002/pen.21409 ↗
37. Effects of various plasticizers on mechanical and water vapor barrier properties of gelatin films10.1016/j.foodhyd.2008.07.017 ↗
38. Magnetic resonance and conductivity study of gelatin-based proton conductor polymer electrolytes10.1016/j.electacta.2009.04.038 ↗
39. Magnetic resonance and conductivity study of a gelatin-based polymer gel electrolyte10.1016/j.electacta.2011.07.062 ↗
40. Gelatin in electrochromic devices10.1016/j.optmat.2009.08.013 ↗
41. Gelatin-based protonic electrolyte for electrochromic windows10.1007/s11581-009-0367-8 ↗
42. Ion-conducting membranes based on gelatin and containing LiI/I2 for electrochromic devices10.1080/15421406.2012.634345 ↗
43. Conducting polymers based on natural membranes and Eu3+
44. Gelatin–HCl biomembranes with ionic-conducting properties10.1007/s11581-013-0935-9 ↗
45. GelatinnZn(CF3SO3)2 polymer electrolytes for electrochromic devices10.1002/elan.201300038 ↗
46. ac Impedance, DSC and FT-IR investigations on (x)PVAc−(1−x)PVdF blends with LiClO410.1016/j.matchemphys.2005.08.063 ↗
47. Nature of the glass transition and the glassy state10.1063/1.1744141 ↗
48. Ionic conductivity studies of polymeric electrolytes containing lithium salt with plasticizer10.1016/j.electacta.2004.01.101 ↗
49. Study of the plasticizer effect on a (PEO+NaYF4) polymer electrolyte and its use in an electrochemical cell10.1016/S0167-2738(99)00225-8 ↗