Long alkyl chain-grafted carbon nanotube-decorated binary-core phase-change microcapsules for heat energy storage: Synthesis and thermal properties
Source abstract
Abstract
Abstract Microencapsulated phase-change materials (MPCMs) with carbon nanotube (CNT)-enhanced fillers and binary cores, which exhibit improved thermal conductivity and an adjustable working temperature range, are highly desirable for various heat energy storage applications. However, degraded properties are usually found for the CNT-enhanced MPCMs due to the poor compatibility of CNTs with PCMs, and the existing types of binary-core MPCMs (BCMPCMs) are quite limited. Herein, we prepared a novel type of BCMPCM with a n-octadecane/n-octacosane (C18/C28) mixture as the core, octadecyl isocyanate-grafted CNTs (OICNTs) as the enhancers and melamine-formaldehyde (MF) resin as the shell via in situ polymerization. Morphological and structural characterization of the OICNT-enhanced BCMPCMs demonstrated uniform distributions of OICNTs in both the core and shell. The determined phase-change temperatures were approximately 26 °C and 43 °C, with small degrees of supercooling. The phase-change enthalpy was as high as 187.9 J/g for a relatively large OICNT loading (3 wt%). Thermal conductivity measurements of the OICNT-enhanced BCMPCM/epoxy resin composites showed a 71.4% increase over that of the pure BCMPCM/epoxy resin composite. Moreover, the BCMPCMs experienced two separate temperature buffer stages resulting from the phase-change processes and exhibited a prominent thermal regulation capacity, which is of significance for their potential applications in the cooling of electronic devices, battery thermal management, utilization of waste heat, and air conditioning systems, etc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Latent heat thermal energy storage systems with solid-liquid phase change materials, a review10.1002/adem.201700753 ↗
2. Review on microencapsulated phase change materials (MEPCMs): Fabrication, characterization and applications10.1016/j.rser.2011.07.019 ↗
3. A review on phase change energy storage: materials and applications10.1016/j.enconman.2003.09.015 ↗
4. Phase change material (PCM) storage for free cooling of buildings-a review10.1016/j.rser.2012.10.034 ↗
5. Smart design and construction of nanoflake-like MnO2/SiO2 hierarchical microcapsules containing phase change material for in-situ thermal management of supercapacitors10.1016/j.enconman.2018.03.006 ↗
6. An innovative practical battery thermal management system based on phase change materials: numerical and experimental investigations10.1016/j.applthermaleng.2017.08.172 ↗
7. Application of microencapsulation in textiles10.1016/S0378-5173(02)00141-2 ↗
8. Effects of MicroPCMs on the fabrication of MicroPCMs/polyurethane composite foams10.1016/j.tca.2008.03.006 ↗
9. An experimental study of the latent functionally thermal fluid with micro-encapsulated phase change material particles flowing in microchannels10.1016/j.applthermaleng.2016.05.159 ↗
10. Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: a review
11. Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): a review10.1016/j.rser.2015.09.040 ↗
12. Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: a review10.1016/j.enbuild.2017.03.063 ↗
13. Super-cooling prevention of microencapsulated phase change material10.1016/j.tca.2003.11.006 ↗
14. Silver incorporated microencapsulation of n-hexadecane and n-octadecane appropriate for dynamic thermal management in textiles10.1016/j.tca.2015.05.015 ↗
15. Supercooling elimination of phase change materials (PCMs) microcapsules10.1016/j.energy.2015.05.033 ↗
16. Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol-gel method10.1016/j.energy.2013.09.012 ↗
17. Preparation and characteristics of microencapsulated palmitic acid with TiO2 shell as shape-stabilized thermal energy storage materials10.1016/j.solmat.2014.01.023 ↗
18. Microencapsulation of n-octadecane phase change material with calcium carbonate shell for enhancement of thermal conductivity and serving durability: synthesis, microstructure, and performance evaluation10.1016/j.apenergy.2013.10.029 ↗
19. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2010.08.007 ↗
20. Review on phase change material emulsions and microencapsulated phase change material slurries: materials, heat transfer studies and applications10.1016/j.rser.2011.07.152 ↗
21. Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage10.1016/j.rser.2017.10.002 ↗
22. High-electrical-resistivity thermally-conductive phase change materials prepared by adding nanographitic fillers into paraffin10.1016/j.mee.2015.02.039 ↗
23. The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials10.1016/j.solmat.2011.01.021 ↗
24. Energy storage and solidification of paraffin phase change material embedded with graphite nanofibers10.1016/j.ijheatmasstransfer.2011.04.046 ↗
25. Experimental study of enhanced heat transfer by addition of CuO nanoparticle Heat Mass Transfer10.1007/s00231-011-0945-y ↗
26. Microencapsulated phase change material modified by graphene oxide with different degrees of oxidation for solar energy storage10.1016/j.solmat.2017.09.034 ↗
27. Unusually high thermal conductivity of carbon nanotubes10.1103/PhysRevLett.84.4613 ↗
28. Enhanced thermal conductivity of microencapsulated phase change materials based on graphene oxide and carbon nanotube hybrid filler10.1016/j.solmat.2018.12.014 ↗
29. Enhancement in thermal property and mechanical property of phase change microcapsule with modified carbon nanotube10.1016/j.apenergy.2014.04.029 ↗
30. Carbon nanotube-enhanced double-walled phase-change microcapsules for thermal energy storage10.1039/C6TA09712J ↗
31. Synthesis and thermal properties of novel microencapsulated phase-change materials with binary cores and epoxy polymer shells10.1007/s00289-016-1718-z ↗
32. Adjusting phase change temperature of microcapsules by regulating their core compositions10.1016/j.matlet.2012.05.033 ↗
33. Microencapsulation of phase change materials with binary cores and calcium carbonate shell for thermal energy storage10.1016/j.apenergy.2016.03.037 ↗
34. Preparation and characterization of poly(methyl methacrylate-co-divinylbenzene) microcapsules containing phase change temperature adjustable binary core materials10.1016/j.solener.2012.04.008 ↗
35. Preparation and thermal reliabilities of microencapsulated phase change materials with binary cores and acrylate-based polymer shells10.1016/j.tca.2014.04.023 ↗
36. Reduction of solubilized multi-walled carbon nanotubes10.1016/S0008-6223(02)00286-5 ↗
37. In situ synthesis of biopolyurethane nanocomposites reinforced with modified multiwalled carbon nanotubes10.1002/app.42515 ↗
38. Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets10.1016/j.carbon.2006.06.004 ↗
39. Functionalized carbon nanotubes containing isocyanate groups10.1016/j.jssc.2004.09.036 ↗
40. Highly conductive and flexible chitosan based multi-wall carbon nanotube/polyurethane composite fibers10.1039/C5RA23791B ↗
41. Fabrication, morphology and thermal properties of octadecylamine-grafted graphene oxide-modified phase-change microcapsules for thermal energy storage10.1016/j.compositesb.2018.08.066 ↗
42. A high performance all-solid-state flexible supercapacitor based on carbon nanotube fiber/carbon nanotubes/polyaniline with a double core-sheathed structure10.1016/j.electacta.2018.06.158 ↗
43. Morelos-Gómez · 2013 · 189
44. Carbon nanotube-enhanced double-walled phase-change microcapsules for thermal energy storage10.1039/C6TA09712J ↗
45. Graphene oxide-modified microencapsulated phase change materials with high encapsulation capacity and enhanced leakage-prevention performance10.1016/j.apenergy.2017.04.041 ↗
46. Vibrational analysis of some important group frequencies of melamine derivatives containing methoxymethyl, and carbamate substituents: mechanical coupling of substituent vibrations with triazine ring modes10.1016/S0924-2031(98)00015-0 ↗
47. Confinement-driven radical change in the sequence of rotator phases: a study on n-octacosane10.1039/C8CP03603A ↗
48. Synthesis and properties of microencapsulated n-octadecane with polyurea shells containing different soft segments for heat energy storage and thermal regulation10.1016/j.solmat.2009.02.021 ↗
49. Rotator phases of the normal alkanes: an x-ray scattering study10.1063/1.464874 ↗
50. Preparation and properties of nanoencapsulated n-octadecane phase change material with organosilica shell for thermal energy storage10.1016/j.enconman.2015.08.048 ↗
51. Shape-stabilised n-octadecane/activated carbon nanocomposite phase change material for thermal energy storage10.1016/j.jtice.2015.03.028 ↗
52. Increasing the thermal conductivity of palmitic acid by the addition of carbon nanotubes10.1016/j.carbon.2010.06.044 ↗
53. Thermal energy storage characteristics of micronanoencapsulated heneicosane and octacosane with poly(methylmethacrylate) shell10.3109/02652048.2016.1144820 ↗