Passivation quality control in poly-Si/SiO /c-Si passivated contact solar cells with 734 mV implied open circuit voltage
Source abstract
Abstract
Abstract Passivation quality of poly-Si contacts with different phosphorus doping concentration were investigated in this study. Intrinsic poly-Si layers were deposited by LPCVD on a tunnel oxide surface, followed by n + poly-Si doping and hydrogenation. For lightly doped poly-Si contacts with phosphorus concentration of 2.1 × 10 19 cm − 3 , higher temperatures and longer times increased iV OC achieving maximum value of 734 mV, as poly-Si grain size increases from 13 nm to 40 nm. However, for heavily doped poly-Si contacts with phosphorus concentration of 1.1 × 10 20 cm − 3 , iV OC decreased from 731 mV to 696 mV as annealing time increased from 10 to 60 min because Auger recombination rate increased from 9.3 fA / cm 2 to 21.6 fA / cm 2 as phosphorus in-diffusion occurs. The contact resistance of poly-Si contacts was also investigated to achieve a high fill factor. Finally, a poly-Si/SiOx/c-Si passivated contact solar cell using a poly-Si contact on the back and boron diffused emitter on the front was fabricated. As a result, high efficiency of 21.1% solar cell was achieved with V OC of 665 mV, J SC of 40.6 mA/cm2, and fill factor of 78.3%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
2. n-type si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
4. Recombination behavior and contact resistance of n + and p + poly-crystalline si/mono-crystalline si junctions10.1016/j.solmat.2014.06.003 ↗
5. Material properties of lpcvd processed n-type polysilicon passivating contacts and its application in perpoly industrial bifacial solar cells10.1016/j.egypro.2017.09.250 ↗
6. Tunnel oxide passivated contacts formed by ion implantation for applications in silicon solar cells10.1063/1.4936223 ↗
7. F. Feldmann, C. Reichel, R. Müller, M. Hermle, Si solar cells with top/rear poly-si contacts, in: Proceedings of the IEEE 43rd Photovoltaic Specialists Conference (PVSC), IEEE, 2016, pp. 2421–2424.10.1109/PVSC.2016.7750076 ↗
8. Ibc c-si solar cells based on ion-implanted poly-silicon passivating contacts10.1016/j.solmat.2016.05.041 ↗
9. Design and application of ion-implanted polysi passivating contacts for interdigitated back contact c-si solar cells10.1063/1.4940364 ↗
10. The application of poly-si/siox contacts as passivated top/rear contacts in si solar cells10.1016/j.solmat.2016.09.015 ↗
11. Fabrication and modeling of high-efficiency front junction n-type silicon solar cells with tunnel oxide passivating back contact10.1109/JPHOTOV.2017.2715720 ↗
12. Low-cost plasma immersion ion implantation doping for interdigitated back passivated contact (ibpc) solar cells10.1016/j.solmat.2016.05.044 ↗
13. R. Peibst, Y. Larionova, S. Reiter, M. Turcu, R. Brendel, D. Tetzlaff, J. Krügener, T. Wietler, U. Höhne, J. Kähler, et al., Implementation of n + and p + polo junctions on front and rear side of double-side contacted industrial silicon solar cells, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, 2016, pp. 323–327.
14. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
15. Bestimmung der gröss kolloidteilchen mittels nachrichten von der gesellschaft der wissenschaften, göttingen
16. Passivation properties of tunnel oxide layer in passivated contact silicon solar cells10.1016/j.apsusc.2017.02.195 ↗
17. Growth and physical properties of lpcvd polycrystalline silicon films10.1149/1.2115672 ↗
18. Fahrenbruch · 1983
19. Study of pinhole conductivity at passivated carrier-selected contacts of silicon solar cells10.1016/j.egypro.2016.07.040 ↗
20. D. Tetzlaff, J. Krügener, Y. Larionova, S. Reiter, M. Turcu, R. Peibst, U. Höhne, J.-D. Kähler, T. Wietler, Evolution of oxide disruptions: The (w) hole story about poly-si/c-si passivating contacts, in: IEEE 44th Proceedings of the Photovoltaic Specialist Conference (PVSC), IEEE, 2017, pp. 1–4.10.1109/PVSC.2016.7749582 ↗
21. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide10.1063/1.4986924 ↗
22. Characteristics of the surface-state charge (qss) of thermally oxidized silicon10.1149/1.2426565 ↗
23. A simple model describing the symmetric i-v characteristics of p polycrystalline/n monocrystalline si and n polycrystalline si/p monocrystalline si junctions10.1109/JPHOTOV.2014.2310740 ↗
24. Working principle of carrier selective poly-si/c-si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
25. K.R. McIntosh, P.P. Altermatt, A freeware 1d emitter model for silicon solar cells, in: Proceedings of the 35th IEEE Photovoltaic Specialists Conference (PVSC), IEEE, 2010, pp. 002188–002193.10.1109/PVSC.2010.5616124 ↗
26. A. Paduthol, M.K. Juhl, Z. Hameiri, G. Nogay, P. Löper, T. Trupke, Efficient carrier injection from amorphous silicon into crystalline silicon determined from photoluminescence, in: Proceedings of the 33rd European Photovoltaic Solar Energy Conference and Exhibition, Amsterdam, Netherlands, 2017, pp. 238–241.
27. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
28. 3-d simulation of interdigitated-back-contact silicon solar cells with quokka including perimeter losses10.1109/JPHOTOV.2014.2320302 ↗