Robustness and electrical reliability of AZO/Ag/AZO thin film after bending stress
Source abstract
Abstract
Abstract The increasing interest in thin flexible and bendable devices has led to a strong demand for mechanically robust and electrically reliable transparent electrodes. Indium doped Tin Oxide (ITO) and Aluminium doped Zinc Oxide (AZO) are among the most employed transparent conductive oxides (TCO) and their reliability on flexible substrates have thus received a great attention. However, a high flexibility is usually achieved at very low thickness, which, unfortunately, compromises the electrical conductivity. Here we report the effects of mechanical bending cycles on the electrical and optical properties of ultra thin AZO/Ag/AZO multilayers (45 nm/10 nm/45 nm) and, for comparison, of AZO and ITO single layers whose thickness was, in both cases, 100 nm and 700 nm, deposited at room-temperature on flexible polyethylene naphthalate (PEN) plastic substrates. The electrical stability of the films after several cycles of bending were evaluated by monitoring the relative variation of the electrical resistance with respect to the as prepared sample; the structural damage induced by bending was detected by Scanning Electron Microscopy (SEM). We observed an excellent electrical stability and high flexibility in the AZO/Ag/AZO sample even after 100 cycles, whereas for the single AZO and ITO films the resistivity rapidly increases. The experimental results and numerical simulations provide clear evidences of the key role played by the ductile Ag interlayer that provides improved robustness under mechanical strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. ZnO/Ag/ZnO multilayer film for the application of very low resistance transparent electrode10.1016/j.apsusc.2005.09.021 ↗
2. Indium tin oxide films deposited by thermionic-enhanced DC magnetron sputtering on unheated polyethylene terephthalate polymer substrate10.1016/j.materresbull.2009.03.007 ↗
3. Ginley · 2010
4. Past achievements and future challenges in the development of optically transparent electrodes10.1038/nphoton.2012.282 ↗
5. Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures10.1002/adma.201003188 ↗
6. A transparent conductive oxide electrode with highly enhanced flexibility achieved by controlled crystallinity by incorporation Ag nanoparticles on substrate10.1016/j.jallcom.2014.09.159 ↗
7. Hight-performance flexible Ag nanowire electrode with low-temperature atomic-layer-deposition fabrication of conductive-bridging ZnO film10.1186/s11671-015-0810-x ↗
8. Highly thermostable, flexible, transparent and conductive films on polymide substrate with an AZO/AgNW/AZO structure10.1021/am508704u ↗
9. Hydrogen reduced graphene oxide/metal grid hybrid film: toward hight performance transparent conductive electrode for flexible electrochromic10.1016/j.carbon.2014.09.054 ↗
10. Ultra thin nickel transparent electrodes
11. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
12. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrate10.1063/1.126052 ↗
13. Mechanical properties of ZnO thin films deposited on polyester substrate used in flexible device applications10.1016/j.tsf.2010.07.081 ↗
14. Highly flexible, conductive and transparent MoO3/Ag/MoO3 multilayer electrode for organic photovoltaic cells10.1016/j.tsf.2013.07.048 ↗
15. Structure, optical and electrical properties of Al: ZnO thin films deposited by DC sputtering at room temperature on glass and plastic substrates10.1002/pssa.200925061 ↗
16. Influence of strain on the electrical resistance of zinc oxide doped thin film deposited on polymer substrate10.1002/1527-2648(20020806)4:8<610::AID-ADEM610>3.0.CO;2-1 ↗
17. Transparent conductive ZnO: Al thin films deposited on flexible substrates prepared by direct current magnetron sputtering
18. Comparative investigation of fracture behaviour of aluminium-doped ZnO films on a flexible substrate
19. The effect of bending on the electrical and optical characteristics of aluminum-doped ZnO films deposited on flexible substrates10.1149/2.018301jss ↗
20. Highly flexible, transparent, and low resistance indium zinc oxide–Ag–indium zinc oxide multilayer anode on polyethylene terephthalate substrate for flexible organic light-emitting diodes10.1016/j.tsf.2008.06.025 ↗
21. Study of optical and electrical properties of ZnO/Cu/ZnO multilayers deposited on flexible substrate10.1016/j.tsf.2012.10.064 ↗
22. An indium tin oxide-Free polymer solar cell on flexible glass10.1021/am5071909 ↗
23. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
24. TCO/Ag/TCO transparent electrodes for solar cells application10.1007/s00339-014-8222-9 ↗
25. Optimization of ZnO:Al/Ag/ZnO:Al structures for ultra-thin high-performance transparent conductive electrodes10.1016/j.tsf.2012.02.080 ↗
26. Laser irradiation of ZnO: al/ag/zno: al multilayers for electrical isolation in thin film photovoltaics
27. M. Mayer, SIMNRA, a Simulation Program for the Analysis of NRA, RBS and ERDA, in: Proceedings of the 15th International Conference on the Application of Accelerators in Research and Industry, J. L. Duggan and I.L. Morgan(eds.). AIP Conference Proceedings, 475, pp. 541–544.〈www.simnra.com〉, 1999.10.1063/1.59188 ↗
28. Van der Pauw · Philips Tech. Rev. · 1958 · 20 · 220
29. W. Young, R. Budynas, Roark’s Formulas for Stress and Strain (7nd ed.), McGraw-Hill, pp. 109–124, ISBN 0-07-072542-X.
30. Electrical and Optical Degradation studies on AZO thin film under cyclic bending10.1109/TDMR.2012.2236888 ↗
31. J.M. Gere, S.P. Timoshenko, Mechanics of Materials:Forth edition, Nelson Engineering, ISBN 0534934293, 1996.
32. Mechanik der festen Körper im plastisch deformablen Zustand