journal article·2017-01

On the interface between kesterite absorber and Mo back contact and its impact on solution-processed thin-film solar cells

Thomas Schnabel, Erik Ahlswede

Publisher page

Abstract

Abstract Thin-film solar cells with a kesterite-type Cu 2 ZnSnS x Se 4−x absorber have been prepared via a two-step process based on a metal salt solution with subsequent annealing in Se-containing nitrogen-atmosphere. Particular attention is paid to the interface between absorber and molybdenum, where the formation of secondary phases could be proven by a model experiment. To inhibit this formation, different back contact configurations of Mo and TiN have been tested. It is shown that TiN is an effective chalcogen barrier and avoids the formation of MoS x Se 2−x , but influences the crystallinity of the absorber layer in a negative way, thereby also decreasing the open-circuit voltage. An effect on short-circuit current density and series resistance was not observed. The best results were obtained with an additional, thin Mo-layer on top of the TiN.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells10.1016/0040-6090(94)06462-8 ↗
3. Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells10.1016/S0040-6090(00)01846-0 ↗
4. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
5. Inhibiting the absorber/Mo-back contact decomposition reaction in Cu2ZnSnSe4 solar cells: the role of a ZnO intermediate nanolayer10.1039/c3ta11419h ↗
6. Inhibiting MoS2 formation by introducing a ZnO intermediate layer for Cu2ZnSnS4 solar cells10.1016/j.matlet.2014.05.089 ↗
7. Boosting Cu2ZnSnS4 solar cells efficiency by a thin Ag intermediate layer between absorber and back contact10.1063/1.4863951 ↗
8. Enhancing the Cu2ZnSnS4 solar cell efficiency by back contact modification: inserting a thin TiB2 intermediate layer at Cu2ZnSnS4/Mo interface10.1063/1.4863736 ↗
9. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
10. Study of alternative back contacts for thin film Cu2ZnSnSe4-based solar cells10.1088/0022-3727/48/3/035103 ↗
11. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
12. T. Schnabel, PhD-Thesis, 2015.
13. Source and effects of sodium in solution-processed kesterite solar cells10.1002/pssa.201532619 ↗