Spectral selective surfaces for concentrated solar power receivers by laser sintering of tungsten micro and nano particles
Source abstract
Abstract
Abstract Spectral selective surfaces for concentrated solar power receivers have been fabricated by laser sintering of tungsten micro and nano particles on stainless steel substrate under atmospheric pressure. Solar absorptance of ~83% has been experimentally measured for laser sintered tungsten layer and thermal emittance of ~11.6% at 300 K was computed based on the IR reflectance measurement. This high solar absorptance and low thermal emittance was achieved by a one micron thick laser sintered layer having sub-micron surface roughness with random spacing in the range from nanoscale to 5 μm. Laser sintering has not been applied for fabrication of solar receiver coatings and the first experimental demonstration is presented in this paper. Laser sintering under atmospheric pressure is a cost effective method for solar thermal applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. Kennedy · 2002
3. High solar absorption of a multilayered thin film structure10.1364/OE.15.001907 ↗
4. Fabrication and optimisation of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
5. Characterisation of CVD-tungsten–alumina cermets for high-temperature selective absorbers10.1016/S0927-0248(97)00219-5 ↗
6. Optical properties of higher and lower refractive index composites in solar selective coatings10.1016/S0927-0248(01)00045-9 ↗
7. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
8. High efficiency Mo–Al2O3 cermet selective surfaces forhigh-temperature application10.1016/0927-0248(95)00078-X ↗
9. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
10. High-temperature space-stable selective solar absorber coatings10.1364/AO.4.000917 ↗
11. A.Y. Vorobyev, G. Chunlei, Proceedings of the 2010 International Conference on Biosciences (BIOSCIENCESWORLD '10), Cancun, 7–13 March, 2010, pp. 135–138.10.1109/BioSciencesWorld.2010.24 ↗
12. Coatings for enhanced photothermal energy collection I. Selective absorbers10.1016/0165-1633(79)90001-7 ↗
13. Solar selective absorbers based on two-dimensional W surface gratings with submicron periods for high-temperature photothermal conversion10.1016/S0927-0248(02)00364-1 ↗
14. Periodical surface structuring of metals by laser interference metallurgy as a new fabrication method of textured solar selective absorbers10.1002/adem.200500261 ↗
15. Surface texturing of copper by sputter etching with applications for solar selective absorbing surfaces10.1116/1.570663 ↗
16. Formation of solar absorber surface on nickel with femtosecond laser irradiation10.1007/s00339-012-6909-3 ↗
17. Sun · 2010
18. Effect of laser sintering on Ti–ZrB2 mixtures10.1111/j.1551-2916.2011.04537.x ↗
19. Influence of microroughness on emissivity10.1063/1.1776634 ↗
20. Nano-optics from sensing to waveguiding10.1038/nphoton.2007.223 ↗
21. Palik · 1985
22. 〈http://refractiveindex.info/?group=METALS&material=Tungsten〉, June 5, 2013.
23. Ernst & Young and Fraunhofer Institute, MENA Assessment of the Local Manufacturing Potential for Concentrated Solar Thermal Power (CSP) Projects. 〈http://arabworld.worldbank.org/content/awi/en/home/research/mena_solar.html〉, 2011 (accessed 5.06.13).