Long-term thermal stability of CrAlO-based solar selective absorbing coating in elevated temperature air
Source abstract
Abstract
Abstract Long-term thermal stability (LTTS) of the CrAlO-based selective absorbing coating deposited by cathodic arc ion plating was systemically investigated. The CrAlO-based coating consisted of columnar structured Mo layer, nano-multilayer structured low oxygen content Cr-Al-O layer (LOCL), as well as amorphous middle oxygen content Cr-Al-O layer (MOCL) and high oxygen content Cr-Al-O layer (HOCL), from substrate to surface. Absorptance (α) between 0.918–0.924 and emittance (e) between 0.154–0.170 were obtained in the as-deposited coating. In order to investigate the LTTS of the coating in air, four as-deposited coatings were annealed at temperatures of 500, 600, 700, and 800 °C for 200, 200, 50, and 10 h, respectively. The compositions, structures, and surface morphologies of these coatings were characterized using SEM, EDS, XRD, TEM, Raman, and AFM, while the optical performances were measured by the spectrophotometers. Results showed that the CrAlO-based coating exhibited outstanding LTTS with a selectivity (α/e) of 0.923/0.149 even after annealing at 500 °C for 200 h in air, as well as no obvious changes were detected on structure of the coating. At annealing temperature of 600 °C for 200 h, degradation of the nano-multilayer structured LOCL as well as a thin oxide layer formed on the coating surface were observed. At higher annealing temperatures of 700 °C for 50 h and 800 °C for 10 h, the degradation of the Mo layers and thicker oxide layers on the coating surfaces could be found. These obtained results indicated that the CrAlO-based selective absorbing coating with excellent thermal stability could be a promising material for photo-thermal conversion at temperatures higher than 500 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Microstructure and spectral selectivity of Mo-Al2O3 solar selective absorbing coatings after annealing [J]10.1016/j.tsf.2007.07.193 ↗
2. High efficiency Mo-Al2O3 cermet selective surfaces for high-temperature application [J]10.1016/0927-0248(95)00078-X ↗
3. Optimizing analysis of W-AlN cermet solar absorbing coatings [J]10.1088/0022-3727/34/21/303 ↗
4. Pt-Al2O3 nanocoatings for high temperature concentrated solar thermal power applications [J]10.1016/j.physb.2011.09.104 ↗
5. Thermal stability of TiAlN/TiAlON/Si3N4 tandem absorbers prepared by reactive direct current magnetron sputtering [J]10.1116/1.2699425 ↗
6. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications [J]10.1016/j.solmat.2007.11.004 ↗
7. Functional multi-layer nitride coatings for high temperature solar selective applications [J]10.1016/j.solmat.2013.10.024 ↗
8. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications [J]10.1016/j.surfcoat.2011.09.003 ↗
9. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications [J]10.1016/j.solmat.2011.10.028 ↗
10. The spectral properties and thermal stability of CrAlO-based solar selective absorbing nanocomposite coating [J]10.1016/j.solmat.2013.12.010 ↗
11. Improvement of thermal stability in the solar selective absorbing Mo-Al2O3 coating [J]10.1016/j.solmat.2012.11.010 ↗
12. Optimization of solar absorbing three-layer coatings [J]10.1016/j.solmat.2005.03.009 ↗
13. Solar energy materials [J]10.1007/BF00323721 ↗
14. Raman effect of corundum [J]10.1063/1.1711980 ↗
15. Raman spectroscopy and x-ray diffraction of phase transitions in Cr2O3 to 61 GPa [J]10.1103/PhysRevB.69.144107 ↗