Nanoporous silica microspheres–ploymethylpentene (TPX) hybrid films toward effective daytime radiative cooling
Source abstract
Abstract
Abstract The metamaterial radiative cooling films based on nanoporous SiO2 microsphere-Poly-4-methyl -1-pentene (TPX) hybrid system were deposited on fluorine doped tin oxide (FTO) substrates via tape casting. Effects of the fabrication parameters, film thickness, SiO2/TPX volumetric ratio and microsphere size on the crystallinity, microstructure, optical transmittance and infrared emittance of the hybrid films were examined. Results show that the crystallinity of the TPX matrix is influenced by the deposition temperature, and the microstructure of the hybrid film is influenced by the film thickness, with the film of 50 μm thickness exhibiting porous microstructure on the surface. The optical transmittance in the visible-near infrared band decreases with the increase of the film thickness and the SiO2/TPX volumetric ratio, and with the decrease of the microsphere size. The absolute quantity of SiO2 microspheres in hybrid film determines the transmittance and the scattering effect. The emittance at 8–13 μm increases with the increase of the film thickness and the SiO2/TPX ratio and with the decrease of microsphere size. The film with 50 μm thickness, 5% SiO2/TPX ratio and 8 μm microspheres exhibits both high emittance (up to 0.91) and high selectivity in the atmospheric window. The cooling device integrating the optimal hybrid film and silver reflective layer demonstrates the lowest temperature in the diurnal test, about 20 °C lower than the black surface, 12 °C lower than the Ag-coated glass and 8 °C lower than the FTO sample. In the nocturnal test, the maximum 4.5 °C reduction relative to the ambient temperature is observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Energy, environment and sustainable development10.1016/j.rser.2007.05.001 ↗
2. Photovoltaic-thermal collectors for night radiative cooling of buildings10.1016/j.solener.2011.03.015 ↗
3. Potential energy savings by radiative cooling system for a building in tropical climate10.1016/j.rser.2014.01.053 ↗
4. Performance analysis on a building-integrated solar heating and cooling panel10.1016/j.renene.2014.08.076 ↗
5. Radiative cooling as low-grade energy source: a literature review10.1016/j.rser.2017.04.010 ↗
6. Radiative cooling to low-temperatures-general-considerations and application to selectively emitting SiO films10.1063/1.329270 ↗
7. Surfaces for radiative cooling: silicon monoxide films on aluminum10.1063/1.91406 ↗
8. Radiative cooling with MgO and or LiF layers10.1364/AO.23.000370 ↗
9. Noctural and diurnal performances of selective radiators
10. Radiative cooling of TiO2 white paint10.1016/0038-092X(78)90195-0 ↗
11. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
12. Effective radiative cooling by paint-format microsphere-based photonic random media10.1021/acsphotonics.7b01492 ↗
13. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling
14. Daytime radiative cooling using near-black infrared emitters10.1021/acsphotonics.6b00991 ↗
15. Performance assessment of a photonic radiative cooling system for office buildings10.1016/j.renene.2017.10.062 ↗
16. A review of clear sky radiative cooling developments and applications in renewable power systems and passive building cooling10.1016/j.solmat.2018.01.015 ↗
17. Radiative cooling of solar absorbers using a visibly transparent photonic crystal thermal blackbody10.1073/pnas.1509453112 ↗
18. Double-layer nanoparticle-based coatings for efficient terrestrial radiative cooling10.1016/j.solmat.2017.04.020 ↗
19. A Metamaterial emitter for highly efficient radiative cooling10.1002/adom.201500119 ↗
20. Metal-loaded dielectric resonator metasurfaces for radiative cooling10.1002/adom.201700460 ↗
21. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
22. Tape casting of polysiloxane-derived ceramic with controlled porosity and surface properties10.1016/j.jeurceramsoc.2018.07.016 ↗
23. Preparation of room temperature curable organic-inorganic hybrid thermal control coatings10.15541/jim20180092 ↗
24. Silver mirror reaction as an approach to construct a durable, robust superhydrophobic surface of bamboo timber with high conductivity10.1016/j.jallcom.2015.02.047 ↗
25. Radiative cooling to deep sub-freezing temperatures through a 24-h day-night cycle10.1038/ncomms13729 ↗
26. Application of TPX polymer membranes for the controlled release of triprolidine10.1016/S0378-5173(01)00906-1 ↗
27. A review of polymer–nanocomposite electrolyte membranes for fuel cell application10.1016/j.jiec.2014.04.030 ↗
28. Peculiarities of light scattering by nanoparticles and nanowires near plasmon resonance frequencies in weakly dissipating materials10.1088/1464-4258/9/9/S03 ↗
29. On the scattering of light by small particles10.1080/14786447108640507 ↗
30. Radiative heat pumping from the earth using surface phonon resonant nanoparticles10.1021/nl903271d ↗
31. Optimization of heating and cooling of a building by employing refuse and renewable energy10.1016/S0960-1481(99)00117-2 ↗
32. A new crystal Mg11(HPO3)8(OH)6 for daytime radiative cooling10.1016/j.solmat.2018.06.012 ↗
33. Preliminary experimental study of a specular and a diffuse surface for daytime radiative cooling10.1016/j.solmat.2018.11.032 ↗