Secondary phase formation during monoclinic Cu2SnS3 growth for solar cell application
Source abstract
Abstract
Abstract Cu2SnS3 is investigated as a potential solar absorber material, which is known to exist in several polymorphs. In the present work, the transition to the most efficient monoclinic polymorph is investigated and an explanation is given why this one seems to be the best for solar cells. Cubic, mixed polymorphs and monoclinic polymorphs are synthesised with increasing temperature. Photoluminescence spectra of the mixed and cubic polymorphs show mainly defect emissions below the band-gap energy, while the monoclinic modification shows only one sharp peak, which is attributed to the conduction to valence band transition. The monoclinic polymorph also grows in combination with a secondary phase containing sodium, NaxCuSnS3, with x between 0.5 and 1. It exhibits a cubic (F43m) crystal structure like CuSn3.75S8 and a band-gap of around 1.6 eV. Devices with absorber layers of monoclinic Cu2SnS3, in which NaxCuSnS3 is either present or removed, gave similar power conversion efficiencies of above 1%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Effect of annealing temperature on the properties of spray deposited Cu2SnS3 thin films10.1002/pssa.201329157 ↗
2. Structural, morphological and optical properties of Cu2SnS3 thin film synthesized by spin coating technique10.1016/j.vacuum.2013.08.019 ↗
3. CuxSnSx+1 (x=2, 3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering10.1002/pssc.200982746 ↗
4. Non-toxic, earth-abundant 2% efficient Cu2SnS3 solar cell based on tetragonal films direct-coated from single metal-organic precursor solution10.1016/j.solmat.2013.02.017 ↗
5. Structural and optical properties of Cu2SnS3 and Cu3SnS4 thin films by successive ionic layer adsorption and reaction10.1007/s10854-012-0960-x ↗
6. Growth of Cu2SnS3 thin films by solid reaction under sulphur atmosphere10.1016/j.vacuum.2010.10.001 ↗
7. Sulfurization temperature dependences of photovoltaic properties in Cu2SnS3 -based thin-film solar cells10.7567/JJAP.53.05FW13 ↗
8. Cu2SnS3 and Cu4SnS4 thin films via chemical deposition for photovoltaic application10.1149/1.3384660 ↗
9. Thin film solar cells based on the ternary compound Cu2SnS310.1016/j.tsf.2012.05.085 ↗
10. Cu2SnS3 thin-film solar cells fabricated by sulfurization from NaF/Cu/Sn stacked precursor10.7567/APEX.8.042303 ↗
11. Fabrication of Cu2SnS3 thin-film solar cells with power conversion efficiency of over 4%10.7567/JJAP.54.08KC06 ↗
12. Solution-based processing of Cu(In,Ga)Se2 absorber layers for 11% efficiency solar cells via a metallic intermediate10.1002/pip.2546 ↗
13. Cu2ZnSnSe4 device obtained by formate chemistry for metallic precursor layer fabrication10.1016/j.solener.2015.03.050 ↗
14. Effects of back contact instability on Cu2ZnSnS4 devices and processes10.1021/cm4015223 ↗
15. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
16. A study of ternary Cu2SnS3 and Cu3SnS4 thin films prepared by sulfurizing stacked metal precursors10.1088/0022-3727/43/21/215403 ↗
17. The Cu–Sn phase diagram, Part I: new experimental results10.1016/j.intermet.2012.10.004 ↗
18. Evaluation of photovoltaic materials within the Cu-Sn-S family10.1063/1.4851896 ↗
19. Control of doping in Cu2SnS3 through defects and alloying10.1021/cm501339v ↗
20. Raman analysis of monoclinic Cu2SnS3 thin films10.1063/1.4712623 ↗
21. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
22. Grain size and texture of Cu2ZnSnS4 thin films synthesized by cosputtering binary sulfides and annealing: effects of processing conditions and sodium10.1007/s11664-011-1729-3 ↗
23. The chemical potential of radiation10.1088/0022-3719/15/18/012 ↗
24. Combinatorial exploration of the effects of intrinsic and extrinsic defects in Cu ZnSn(S,Se)10.1109/JPHOTOV.2014.2361053 ↗
25. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
26. Effects of disorder on carrier transport in Cu2SnS310.1103/PhysRevApplied.4.044017 ↗
27. J. de Wild, E.V.C. Robert, B. El Adib, P.J. Dale, Optical characterization of solution prepared Cu2SnS3 for photovoltaic applications, in: Symp. BCDE – Recent Adv. Photovolt., 2015, pp. 151–156. doi: 10.1557/opl.2015.624.10.1557/opl.2015.624 ↗
28. Copper sulphide (CuxS) as an ammonia gas sensor working at room temperature10.1016/j.snb.2008.02.015 ↗
29. Cu2SnS3 based solar cell with 3% efficiency10.1002/pssc.201510115 ↗
30. Kesterites—a challenging material for solar cells10.1002/pip.2156 ↗
31. Quantification of surface ZnSe in Cu2ZnSnSe4-based solar cells by analysis of the spectral response10.1016/j.solmat.2014.01.015 ↗