journal article·2011-08

Nano-structured Cu2O solar cells fabricated on sparse ZnO nanorods

Jhin-Wei Chen, Dung-Ching Perng, Jia-Feng Fang

Publisher page

Abstract

Abstract Nano-structured Cu2O/ZnO nanorod (NR) heterojunction solar cells fabricated on indium tin oxide (ITO)-coated glass are studied. Substrate film and NR density have a strong influence on the preferred growth of the Cu2O film. The X-ray diffractometer (XRD) analysis results show that highly (2 0 0)-preferred Cu2O film was formed when plating on plain ITO substrate. However, a highly (1 1 1)-preferred Cu2O film was obtained when plating on sparse ZnO NRs. SEM, TEM and XRD studies on sparse NR samples indicate that the Cu2O nano-crystallites mostly initiate its nucleation on the peripheral surfaces of the ZnO NRs, and are also highly (1 1 1)-oriented. Solar cells with ZnO NRs yielded much higher efficiency than those without. In addition, ZnO NRs plated on a ZnO-coated ITO glass significantly improve the shunt resistance and open-circuit voltage (Voc) of the devices, with consistently much higher efficiency obtained than when ZnO NRs are directly plated on ITO film. However, longer NRs do not improve the efficiency due to low short-circuit current (Jsc) and slightly higher series resistance. The best conversion efficiency of 0.56% was obtained from a Cu2O/ZnO NRs heterojunction solar cell fabricated on a 80 nm ZnO-coated ITO glass with Voc=0.514 V, Jsc=2.64 mA/cm2 and 41.5% fill factor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Optical, structural, and electrical properties of Cu2O thin films10.1002/pssa.200983736 ↗
2. Theoretical considerations governing the choice of the optimum semiconductor for photovoltaic solar energy conversion10.1063/1.1722483 ↗
3. Defect chemistry of Cu2−yO at elevated temperatures. Part II: electrical conductivity, thermoelectric power and charged point defects10.1016/0167-2738(95)00169-7 ↗
4. Self-compensation in semiconductors10.1103/PhysRevB.60.8138 ↗
5. Impurity solubility limits in ionic crystals, with application to Cu2O10.1524/zpch.1998.207.Part_1_2.181 ↗
6. CdO/Cu2O solar cells by chemical deposition10.1016/j.solener.2004.05.014 ↗
7. Electrical and optical properties of TCO–Cu2O heterojunction devices10.1016/j.tsf.2004.06.180 ↗
8. Fabrication of the CuO/Cu2O heterojunction using an electrodeposition technique for solar cell applications10.1088/0268-1242/25/4/045015 ↗
9. Fabrication and characterization of oxide heterojunctions prepared by electrodepositing cuprous oxide on conductive glasses10.1143/JJAP.48.035501 ↗
10. Electrodeposited cuprous oxide on indium tin oxide for solar applications10.1016/S0927-0248(01)00112-X ↗
11. Electrochemically constructed p-Cu2O/n-ZnO heterojunction diode for photovoltaic device10.1088/0022-3727/40/11/010 ↗
12. Cu2O/n-ZnO nanowire solar cells on ZnO:Ga/glass templates10.1016/j.scriptamat.2007.03.012 ↗
13. Al-doped ZnO/Cu2O heterojunction fabricated on (200) and (111)-orientated Cu2O substrates10.1149/1.2980424 ↗
14. Heterojunction solar cell with 2% efficiency based on a Cu2O substrate10.1063/1.2194315 ↗
15. Nitrogen doping into Cu2O thin films deposited by reactive radio-frequency magnetron sputtering10.1143/JJAP.40.2765 ↗
16. A study of the CuO phase formation during thin film deposition by molecular beam epitaxy10.1016/S0040-6090(97)01203-0 ↗
17. Electrochemical preparation of p-type cupric and cuprous oxides on platinum and gold substrates from copper (II) solutions with various amino acids10.1149/1.1512670 ↗
18. Galvanostatic deposition and electrical characterization of cuprous oxide thin films10.1016/0040-6090(92)90015-4 ↗
19. Electrochemical deposition of Cu2O on stainless steel substrates: Promotion and suppression of oriented crystallization10.1016/j.solidstatesciences.2007.11.007 ↗
20. Direct fabrication and patterning of Cu2O film by local electrodeposition method10.1016/j.ssi.2004.01.081 ↗
21. A ZnO nanowire vacuum pressure sensor10.1088/0957-4484/19/9/095505 ↗
22. Room-temperature ultraviolet nanowire nanolasers10.1126/science.1060367 ↗
23. Comparison of the device physics principles of planar and radial p–n junction nanorod solar cells10.1063/1.1901835 ↗
24. A strong antireflective solar cell prepared by tapering silicon nanowires10.1364/OE.18.00A286 ↗
25. Conversion photovoltaique dans Cu2O10.1051/rphysap:01979001401023100 ↗
26. Temperature dependence of the optical transitions in electrodeposited Cu2O thin films10.1016/S0927-0248(01)00068-X ↗
27. Structural and annealing studies of potentiostatically deposited Cu2O thin films10.1016/j.solmat.2004.05.026 ↗
28. ZnO thin film preparation using RF sputtering at various oxygen contents
29. Influence of substrate temperature on the optical and piezoelectric properties of ZnO thin films deposited by rf magnetron sputtering10.1016/j.apsusc.2007.03.020 ↗
30. Influence of sputtering parameters on crystalline structure of ZnO thin films10.1016/j.tsf.2007.03.125 ↗
31. The structural evolution and electrochemical properties of the textured Cu2O thin films10.1016/j.jallcom.2006.07.019 ↗