Thermal stability of electron beam evaporated AlxOy/Pt/AlxOy multilayer solar absorber coatings
Source abstract
Abstract
Abstract This paper reports the effect of thermal annealing on Al x O y /Pt/Al x O y multilayer solar absorber coatings deposited by an electron beam (e-beam) vacuum evaporator onto copper substrate at room temperature. The samples were annealed at different temperatures for different duration in air. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), atomic force microscopy (AFM), Raman spectroscopy, UV–vis spectrophotometer and emissometer. The results showed changes in morphology, structure, composition, and optical properties depend on both temperature and duration of annealing. The XRD pattern showed the intensity of Pt decreased with increasing annealing temperature and therefore, disappeared at high temperature. With increasing annealing temperature, an increase in the size of Pt particles was observed from SEM. The Al x O y /Pt/Al x O y multilayer solar absorber coatings deposited onto Cu substrate were found to be thermally stable up to 500 °C in air for 2 h with good spectral selectivity ( α / e ) of 0.951/0.09. At 600 °C and 700 °C, the spectral selectivity decreased to 0.92/0.10 and 0.846/0.11 respectively, which is attributed to the diffusion of Cu and formation of CuO and Cu 2 O phases. The formation of CuO and Cu 2 O phases were confirmed by XRD, Raman spectroscopy and optical modelling. Long term thermal stability study showed the coatings were thermally stable in air up to 450 °C for 24 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · solar cell performance optimization · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Sputtering deposition and characterization of tandem absorbers for photo-thermal systems operating at mid temperature10.1016/j.optmat.2011.08.030 ↗
2. Thermal morphological evolution of platinum nano-particles in Pt–Al2O3 nano-composites10.1016/j.physleta.2005.06.072 ↗
3. Thickness induced transversal percolation in Pt–Al2O3 nano-composites10.1016/j.ssc.2005.10.025 ↗
4. Pt–Al2O3 nanocoatings for high temperature concentrated solar thermal power applications10.1016/j.physb.2011.09.104 ↗
5. Materials for photo-thermal solar energy conversion10.1007/BF00700767 ↗
6. High solar performance selective surface using Bi-sublayer cermet film structures10.1016/0927-0248(92)90089-8 ↗
7. Deposition of PVD solar absorber coatings for high-efficiency thermal collectors10.1016/S0042-207X(02)00263-4 ↗
8. Treatment of antireflection on tin oxide coated anodized aluminium selective absorber surface10.1016/S0927-0248(98)00073-7 ↗
9. C.E. Kennedy, Review of Mid- to High-Temperature Solar Selective Absorber Materials, NREL/TP-520-31267, 2002.10.2172/15000706 ↗
10. Ni cermet selective absorbers for solar photo-thermal conversion10.1016/0038-092X(79)90019-7 ↗
11. Recent progress in high temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
12. Stability of W–Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
13. C. Kennedy, H. Price, Development and Testing of High-Temperature Solar Selective Coatings, NREL/CP-520-36581, 2005.10.1115/ISEC2005-76039 ↗
14. Optical properties and thermal stability of pulsed-sputter-deposited AlxOy/Al/AlxOy multilayer absorber coatings10.1016/j.solmat.2008.11.005 ↗
15. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
16. Sputter-deposited Al2O3/Mo/Al2O3 selective absorber coatings10.1016/0040-6090(80)90563-5 ↗
17. Preparation and thermal stability on non-vacuum high temperature solar selective absorbing coatings10.1007/s11434-009-0159-6 ↗
18. Thermal stability of nitride solar selective absorbing coatings used in high temperature parabolic trough current10.1007/s11431-010-3176-4 ↗
19. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
20. Optimization of AlxOy/Pt/AlxOy multilayer spectrally selective coatings for solar thermal applications10.1016/j.vacuum.2012.06.012 ↗
21. Metal/insulator composite selective absorbers10.1016/0165-1633(79)90061-3 ↗
22. Sputter-deposited Pt–Al2O3 selective absorber deposited multilayer selective absorber coatings10.1016/0040-6090(82)90618-6 ↗
23. Sputter- deposited Pt–Al2O3 graded cermet selective absorbing coatings10.1016/0165-1633(84)90016-9 ↗
24. Pt–Al2O3 selective cermet coatings for high temperature photo-thermal conversion10.1016/0040-6090(82)90552-1 ↗
25. Pt–Al2O3 selective cermet coatings on superalloy substrates for photothermal conversion up to 600°C10.1016/0040-6090(85)90169-5 ↗
26. Review of physical vapour deposition spectrally selective coatings for the mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
27. Thermal stability of TiAlN/TiAlON/Si3N4 tandem absorbers prepared by reactive direct current magnetron sputtering10.1116/1.2699425 ↗
28. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
29. H.C. Barshilia, N. Selvakumar, K.S. Rajam, A. Biswas, Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications, in: Renewable Energy and Environment for Sustainable Development, Narosa Publishing House, New Delhi, India, 2008, pp. 469–477.10.1016/j.solmat.2007.11.004 ↗
30. Design and fabrication of highly thermally stable HfMoN/HfON/Al2O3 tandem absorber for solar thermal power generation applications10.1016/j.solmat.2012.03.021 ↗
31. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
32. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
33. Structural and optical properties of AlxOy/Pt/AlxOy multilayer absorber10.1016/j.mseb.2012.05.028 ↗
34. Compositional analysis and depth profiling of thin film CrO2 by heavy ion ERDA and standard RBS: a comparison10.1016/j.matchar.2012.05.003 ↗
35. M. Mayer, SIMNRA User's Guide, Technical Report IPP9/113, Max–Planck Institut für Plasmaphysik, Garching, Germany, 1995.
36. W. Theiss, SCOUT Optical Spectrum Simulation, M. Theiss Hard- and Software, Achen, 2002.
37. Pressure-induced phase transformation of HfO210.1111/j.1151-2916.1992.tb04149.x ↗
38. Raman spectra of amorphous Al2O3 and Al2O3/MoO3 obtained by visible and infrared excitation10.1002/jrs.1250220109 ↗
39. Thin film of aluminium oxide through pulsed lased deposition: a micro-Raman study10.1016/S0921-5107(00)00554-7 ↗
40. R.B. Pettit, Total Hemispherical Emittance Measurement Apparatus for Solar Selective Coatings, SAND-75-0079, Sandia National Laboratory, Albuquerque, NM, 1975.10.2172/5129665 ↗
41. Large-scale synthesis of CuO shuttle-like crystals via a convenient hydrothermal decomposition route10.1016/S0022-0248(03)01170-9 ↗