Preparation of novel microencapsulated phase change material with Cu-Cu2O/CNTs as the shell and their dispersed slurry for direct absorption solar collectors
Source abstract
Abstract
Abstract In this study, a novel microencapsulated phase change material paraffin@Cu-Cu2O/CNTs was successfully prepared by hydrothermal reduction and in situ deposition method, in which paraffin as the core, Cu, Cu2O and carbon nanotubes (CNTs) as the shell. SEM and TEM results proved that the microcapsules have a core-shell structure, the CNTs were irregularly wrapped on the shell, and the diameter of the microcapsules was about 600-800 nm. The melting temperature and latent heat of the paraffin@Cu-Cu2O/CNTs microcapsules were 61.17 °C and 81.31Jg-1, respectively, and the encapsulation rate of the microcapsules was calculated to be 41.53% from the results of the DSC measurement. Due to the shell material, the paraffin@Cu-Cu2O/CNTs microcapsules displayed excellent thermal stability, its thermal decomposition temperature is increased by 97 °C compared to paraffin. Moreover, the paraffin@Cu-Cu2O/CNTs microcapsules were dispersed in water to form a new kind of slurry, such fluid exhibited great improvement in terms of thermal conductivity, specific heat capacity, light absorption performance and photo-thermal conversion efficiency than that of paraffin@Cu-Cu2O microcapsules slurry. Therefore, the high heat storage capability and excellent photo-thermal conversion performance of the paraffin@Cu-Cu2O/CNTs microcapsule slurry make it to be the most potential heat transfer fluid for direct absorption solar collector.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Performance of a “black” liquid flat plate solar collector10.1016/0038-092X(75)90057-2 ↗
2. Enhancement of photo-thermal conversion using gold nanofluids with different particle sizes10.1016/j.enconman.2016.01.009 ↗
3. Experimental investigation of graphene nanoplatelets nanofluid-based volumetric solar collector for domestic hot water systems10.1016/j.solener.2016.02.034 ↗
4. Microencapsulated phase-change material suspensions for heat transfer in spacecraft thermal systems10.2514/3.26753 ↗
5. Micro-encapsulatedparaffin in phase-change slurries10.1016/j.solmat.2004.12.008 ↗
6. Fabrication of novel slurry containing graphene oxide-modified microencapsulated phase change material for direct absorption solar collector10.1016/j.solmat.2018.08.021 ↗
7. Novel slurry containing graphene oxide-grafted microencapsulated phase change material with enhanced thermo-physical properties and photo-thermal performance10.1016/j.solmat.2015.06.034 ↗
8. Micro/nano encapsulated n-tetracosane and n-octadecane eutectic mixture with polystyrene shell for low-temperature latent heat thermal energy storage applications10.1016/j.solener.2015.02.035 ↗
9. Synthesis and properties of microencapsulated n-octadecane with polyurea shells containing different soft segments for heat energy storage and thermal regulation10.1016/j.solmat.2009.02.021 ↗
10. Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid-liquid microPCM for thermal energy storage10.1016/j.apenergy.2009.10.011 ↗
11. Preparation and characterization of phase-change material nanocapsules with amphiphilic polyurethane synthesized by 3-allyloxy-1,2-propanediol10.1002/app.39302 ↗
12. Fabrication and properties of microencapsulated paraffin@SiO2 phase change composite for thermal energy storage10.1021/sc300082m ↗
13. New approach for sol-gel synthesis of microencapsulated n-octadecane phase change material with silica wall using sodium silicate precursor10.1016/j.energy.2013.11.088 ↗
14. Preparation and characteristics of microencapsulated palmitic acid with TiO2 shell as shape-stabilized thermal energy storage materials
15. Development of bifunctional microencapsulated phase change materials with crystalline titanium dioxide shell for latent-heat storage and photocatalytic effectiveness10.1016/j.apenergy.2014.11.006 ↗
16. Synthesis and characterization of high-photoactivity electrodeposited Cu2O solar absorber by photoelectrochemistry and ultrafast spectroscopy10.1021/jp301176y ↗
17. Synthesis of novel microencapsulated phase change materials with copper and copper oxide for solar energy storage and photo-thermal conversion10.1016/j.solmat.2018.02.008 ↗
18. A black body absorber from vertically aligned single-walled carbon nanotubes10.1073/pnas.0900155106 ↗
19. A new application of carbon nanotubes nanofluid as working fluid of low-temperature direct absorption solar collector10.1016/j.solmat.2013.11.004 ↗
20. A novel CNT encapsulated phase change material with enhanced thermal conductivity and photo-thermal conversion performance10.1016/j.solmat.2018.04.034 ↗
21. Synthesis and light-heat conversion performance of hybrid particles decorated MWCNTs/paraffin phase change materials10.1016/j.tca.2017.03.003 ↗
22. One-pot synthesis of Cu–carbon hybrid hollow spheres[J]10.1016/j.carbon.2013.06.040 ↗
23. Effect of geometrical confinement on the nucleation and crystallization behavior of n-alkane mixtures10.1021/jp807347d ↗
24. Novel slurry containing grapheme oxide-grafted microencapsulated phase change material with enhanced thermophysical properties and photo-thermal performance10.1016/j.solmat.2015.06.034 ↗
25. Liu, ZF, Chen, ZH, Yu, F, Enhanced thermal conductivity of microencapsulated phase change materials based on graphene oxide and carbon nanotube hybrid filler[J]. Sol. Energy Mater. Sol. Cells, 192:72-80.10.1016/j.solmat.2018.12.014 ↗
26. Ilyas, SU, Pendyala, R, Narahari, M, Stability and thermal analysis of MWCNT-thermal oil-based nanofluids[J]. Colloids and Surfaces A-physicochemical and Engineering Aspects, 568:493-493.10.1016/j.colsurfa.2019.02.058 ↗
27. Analysis of suspension stability for nanofluid applied in minimum quantity lubricant grinding10.1007/s00170-014-5642-9 ↗
28. Experimental study on the phase change behavior of phase change material confined in pores10.1016/j.solener.2006.08.010 ↗