The investigation of thermal stability of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coating
Source abstract
Abstract
The thermal stability of the Al/NbMoN/NbMoON/SiO2 solar selective absorbing coatings is investigated to determine its potential applications in concentrated solar power (CSP). The coatings are deposited on stainless steel (SS) substrate by using magnetron reactive sputtering method, which exhibit high solar absorptance (αs = 0.948) and low thermal emittance (e = 0.11, at 400 °C). The coatings are aged (in vacuum and air) at different temperatures and time durations. The aging effect is characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and Vis.-IR spectroscopy. There is no significant change in surface morphology and spectral selectivity (performance criterion (PC) value is 0.021) of the coating after aging at 500 °C for 240 h in vacuum. The coatings also keep high spectral selectivity (PC = 0.034) after aging at 450 °C for 200 h in air. Unfortunately, the value of PC increases to 0.161 when the coating is aged at the temperature of 500 °C for 200 h in air, which is attributed to diffusion and oxidation in the absorbing layers and degradation of the dense surface morphology and structure, as evidenced by XRD and SEM analysis. These results indicate that the Al/NbMoN/NbMoON/SiO2 coatings is stable up to 500 °C in vacuum and below 450 °C in air, which means enough thermal stability for potential applications in parabolic trough CSP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Kennedy · 2002
2. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
3. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
4. Optimization of solar absorbing three-layer coatings10.1016/j.solmat.2005.03.009 ↗
5. The effects of nickel-pigmented aluminium oxide selective coating over aluminium alloy on the optical properties and thermal efficiency of the selective absorber prepared by alternate and reverse periodic plating technique10.1016/j.enconman.2009.11.047 ↗
6. Coatings for concentrating solar systems – a review10.1016/j.rser.2015.01.015 ↗
7. Simulation of two-dimensional Mo photonic crystal surface for high-temperature solar-selective absorber10.1002/pssa.200925573 ↗
8. A review on thermal stability and high temperature induced ageing mechanisms of solar absorber coatings10.1016/j.rser.2016.09.083 ↗
9. Very low emittance solar selective surfaces using new film structures10.1063/1.351510 ↗
10. Spectral properties and thermal stability of solar selective absorbing AlNi-Al2O3 cermet coating10.1016/j.solener.2013.07.012 ↗
11. Optical property and thermal stability of Mo/Mo-SiO2/SiO2 solar selective coating prepared by magnetron sputtering10.1002/pssa.201026301 ↗
12. Optical design and co-sputtering preparation of high performance Mo-SiO2 cermet solar selective absorbing coating10.1016/j.apsusc.2013.04.142 ↗
13. Angular solar absorptance and thermal stability of Mo-SiO2 double cermet solar selective absorber coating10.1016/j.solener.2015.02.013 ↗
14. Microstructure and spectral selectivity of Mo-Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
15. Improvement of thermal stability in the solar selective absorbing Mo-Al2O3 coating10.1016/j.solmat.2012.11.010 ↗
16. Effects of the LMVF and HMVF absorption layer thickness and metal volume fraction on optical properties of the MoSi2-Al2O3 solar selective absorbing coating10.1016/j.vacuum.2014.01.022 ↗
17. Structure and optical properties of Ag-Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
18. High absorptance and low emittance AR-coated Ni-Al2O3 solar absorbers10.1088/0022-3727/23/2/019 ↗
19. High performance W-AlN cermet solar coatings designed by modelling calculations and deposited by DC magnetron sputtering10.1016/j.solmat.2003.08.021 ↗
20. Optimizing analysis of W-AlN cermet solar absorbing coatings10.1088/0022-3727/34/21/303 ↗
21. High efficiency Mo-Al2O3 cermetselective surfaces for high-temperature application10.1016/0927-0248(95)00078-X ↗
22. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
23. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
24. Optimization design of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN coating used for solar selective applications10.1016/j.solmat.2011.01.006 ↗
25. Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating10.1016/j.solmat.2012.12.010 ↗
26. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
27. Spectrally selective CrMoN/CrON tandem absorber for mid-temperature solar thermal applications10.1016/j.solmat.2012.10.003 ↗
28. Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications10.1016/j.solmat.2013.03.005 ↗
29. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
30. Design and fabrication of highly thermally stable HfMoN/HfON/Al2O3 tandem absorber for solar thermal power generation applications10.1016/j.solmat.2012.03.021 ↗
31. Characterization of TiAlSiN/TiAlSiON/SiO2 optical stack designed by modelling calculations for solar selective applications10.1016/j.solmat.2012.06.011 ↗
32. A new solar spectral selective absorbing coating of SS-(Fe3O4)/Mo/TiZrN/TiZrON/SiON for high temperature application10.1016/j.solmat.2014.04.014 ↗
33. Optical simulation and experimental optimization of Al/NbMoN/NbMoON/SiO2 solar selective absorbing coatings10.1016/j.solmat.2014.12.005 ↗
34. Solution combustion of spinel CuMn2O4 ceramic pigments for thickness sensitive spectrally selective (TSSS) paint coatings10.1016/j.ceramint.2016.04.122 ↗
35. Optical simulation and preparation of novel Mo/ZrSiN/ZrSiON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.04.017 ↗
36. Stainless-steel-AlN cermet selective surfaces deposited by direct current magnetron sputtering technology10.1016/S0927-0248(97)00274-2 ↗
37. Metal-AlN cermet solar selective coatings deposited by direct current magnetron sputtering technology10.1088/0022-3727/31/4/003 ↗
38. Structural properties of CuInSe2 films prepared by selenization of metallic precursors on MoNx film substrates10.1016/j.apsusc.2005.05.011 ↗
39. Solar energy materials10.1007/BF00323721 ↗